USB 3.0 & 3.5mm Car Mount Flush Cable, 3ft

This works great for my alpine aftermarket radio. I had an empty hole that a cigarette lighter shaped Port would have gone into in the higher trim model of my car. I put this in that hole and it fit perfectly, and then I ran it under the trim to my Alpine radio which I just installed. Works great and just as fast as the stock cable, and I connected it up with the aux out port on my radio as well and it works great. Nice quality, great price. Easy install. Aux and USB are both nice and solid, no wiggle. Nice to have both ports in one place and have it look factory.

Work great

I installed this in the center console where my parking brake is for an Acura RSX. Make certain that your USB plug or a USB stick will clear your parking brake lever when it is in the down position. Look SUPER clean and professional. 1) - For those who drive an ACURA RSX, I had to put this in the center console because there was NOWHERE for me to install in my dashboard. There just was not enough clearance for it to fit without it knocking into something. 2) - I also DID NOT want to lose my cigarette lighter because that is where I keep my Fast Charge USB which has 2-USB-ports for my other devices. I highly recommend you ALWAYS " dry-fit" this first. The installers did not, so they had to buy me a new car piece. =========== 1) - This WILL fast charge your phone, as long as you are plugging in a fast-charge cable to it. 2) - The AUX works great too. 3) - I am using "JetAudio", "Pulsar" and "Rocket Player" apps so that I can listen to my MP3 music simultaneously while on Google Maps.

I installed an aftermarket radio in my daughters car. I did not want wires hanging out of the dash looking all sloppy. I purchased this and drilled a hole to mount it in the under portion of the dash. This has a very sturdy USB port and 3.5 mm audio jack for aux input. I was able to securely mount this and route the wires behind the dash for a clean install. This has well shielded heavy cables to connect to the back of your radio.

I wish I had a photo of this. Unfortunately, I no longer have the car. I installed this on back of the center console on a 2010 Kia Forte for Uber. Everyone loved it! I'd keep a tri-charger with it and the aux cord alone made me a good bit of money the first night in tips! It's east to install and felt almost factory. A simple hole saw was the only took I used. Just make sure you line it up! Unfortunately, aux cords on phones are becoming less and less common but this is still a great product nevertheless and comes with all the accessories to mount how you see fit!

I used the adapters on my arcade machine. I made a highly detailed review for this BATIGE product. It's on the dual 3.0 port product page. So you can go there to read it: https://www.amazon.com/gp/product/B07C75L5V3 I'll just give you the quick summary which is.... USB 3.0 / 3.5mm audio adapter = 30mm drill bit and also dual 3.0 usb adapter = 30mm drill bit. 30mm = 1-3/16" (in fraction form) I will give you the link to the drill bit i used. It works well, it's a couple of dollars. Ships with amazon prime. I made 3 holes with this 1 drill bit and the drill bit looks like it could still keep cutting more holes. The 30mm drill bit you want to use is this: https://www.amazon.com/gp/product/B07R7TJ78V And you're all set! Note: The other holes (in my photo) is for the Dual HDMI connectors. Dual HDMI uses 38mm

Perfect fit for the factory-installed cigarette lighter replacement . No more usb wires hanging out the dash. This is my 2016 Chevy Silverado 1500LT

My 2010 Chevy Silverado came with two cigarette lighter ports. Actually one was just a 12 volt port to plug up chargers etc. Anyway I didn't need the cigarette lighter port. When I bought the truck used the former owner had installed an aftermarket radio. It has a USB port on the back so you can use radio screen with Android Auto gps. He had a USB cable plugged into the radio and the cable laying on the tranny hump in the floor with a female end on it. He would plug a short USB cable to that to use Android Auto. I wanted it to look cleaner and decided to do it this way. I installed this where the cigarette lighter port was. As a side note, I had to make the old hole in the dash trim a little bigger. This new USB port needs a 1 1/8" hole and the hole in my dash trim was just a hair over 1". No big thing. Use a round file or rasp to enlarge the hole. Only takes a few minutes.

Installed in our 2007 hummer and it’s made well and fit perfectly in the factory cig lighter .

Have not installed it yet but the product looks great lm very satisfied with the build Quality

Very good product for after market stereo dash mount like a company fitmement in dashboard and data transfer all it s work very fast and smoothly

Este articulo por ley deberia ser instalado en los estereos que no tienen acceso frontal al USB o AUX, hace mas facil y accesible conectarse a los puertos usb o aux, ademas que se ve una instalacion limpia

muy buenos materiales se siente de plastico muy robusto, la base para fijarlo fue una sorpresa agradable, sin dudas volveria a comprarlo