Cooler Master MasterAccessory Vertical GPU Card Holder Kit V3 Black, Premium Riser Cable PCI-E 4.0 x16-165mm, PCIe 3.0 Compatible, Adjustable Length for E-ATX|ATX|Micro ATX Case (MCA-U000R-KFVK03)

Great VGM. So much adjustability, easy to assemble, riser cable is great quality. Fits nice in my King 95 Pro. All around great mount.

Perfect mount for my Phenteks NV7 and 7900 xt GPU! Makes the graphics card look great and helps a lot with airflow as the gpu isn’t horizontal and blocking flow in between bottom and top of case. The mount is super sturdy and pretty easy to set up. This truly is all you can ask for and it’s a good price. Compatibility should not be an issue, just make sure the GPU fits

I only gave a four star ratting because the item I received ended up an open box unit. However; after checking the box content I found no damage or missing parts and kept the item due to a coupon that was on the item. But it was supposed to have been new. Installing the bracket into the computer was fairly easy, except for installing the video card onto the PCIE4.0 Mount on the ribbon inside the new bracket. Very tight fit. Looks very nice and if I needed another I would buy it without question. And the fact it was "White" really made it a nice fit for my system setup too.

This is a very well made vertical mount. I have been keeping an eye to purchase for the past few years ever since I bought the 4090. I have my 4090 gaming oc on this mount. It did take a little time to figure out the steps in installing. I only have about one eigth of an inch going down on the right end of the mount.I mean for esthetics and better air flow is the main reason I did purchase it. It will also help with gpu sagging and buying a support bracket which I did back 2022, after knowing it was about five pounds.So is it worth it? In my use case scenarios it is , I went from an all black to rgb light. I even had the rgb lighting on the gpu off from 2022 but enough of that. I have this set up on a ANTEC PERFORMANCE 1 FT case and it fits really well. You can adjust the mount to move forward or backward, left and right.On the 3rd picture you will see a small section from the back that is about 2 slot for removing if you have a micro atx case, so it doesn't interfere with rear fan. That is also awesome for those that have that kind of pc case.If you have a dual cpu air cooler don't even think about it, as it will interfere with gpu mount kit. Almost a tool less design from Coolmaster. All you need is a regular phillips screwdriver for a screws to mount the first part just below the rear motherboard aio. The price was pretty fair for the vertical mount since it's release and the build quality is great.Edit: 7/26 The pcie 4.0 works great no regrets, and the diffrent color of gray could mean also pcie 5.0. I remember it used to be a purple colorI still get the same fps as I did connected to the pcie slot. No issues with screen or games. Great job on both the support bracket and pcie cable.

At first I was skeptical but this mount is amazing! The white matches my case and GPU very well and is a lot sturdier then it appeared at first it has many adjustment options to slide either direction as well as a depth adjustment so you can push it out toward case wall or in to motherboard for those big 3 slot cards. I have a 7900xtx Taichi mounted to this thing and it looks amazing. Build quality is great for the price point. If your looking for a quality vertical mount then look no further!

I really liked the idea of vertically mounting my GPU on my current PC build. This is the first time I felt committed to go the extra mile on putting a computer together for myself, and as I was ordering all the stuff I wanted I decided to put a litte extra money into this. Turns out, the primary decision point is whether or not the riser cable can actually do its job on these kits. The cables themselves sell for only a tiny bit less than the kits. This item carried the Cooler Master name and had several reviews that verified the riser was good, and I knew my case had the metal bits in between the blanks that couldn't be easily removed so the idea of being able to adjust the GPU so I could get a video cable in there seemed to make sense.Problem #1: Good Luck squeezing the end of a video cable into your case and seating it properly. I'm using a Lian Li 205 Mesh C with a 3 fan nvidia card, and in no way does this bracket make plugging in a video cable easier. The complicated depth adjustment only allows me to move the GPU closer to the removable glass panel, not any closer to the motherboard than any of the other universal brackets like you might think, and the right/left possibilities are severely limited by the stiff riser cable's ability to flex sideways. This is not a design issue. It's doing what it was engineered to do... I just thought it would somehow be better.Problem #2: The bracket itself is problematic. First, it is built in such a way as to keep your card at a very slight upward angle. Every picture or video you can find of this thing installed will verify this if you look closely. My card is fairly heavy for a video card, but its not a car. No GPU will ever be heavy enough to bend this bracket down to where you can see its installed at maye a 1 or 2 degree angle. This is a bracket, not a bridge. This bugs me. I can't not see it.Second, the little plastic cams that are supposed to lock the card in position only do one very particular thing. When they're locked down, they stop the card from moving left or right on the bracket. My AIO hoses touched the back of the card itself, and neither the bracket nor the cams did anything to limit the right end of the card from pushing out away from the bracket because of this pressure, off the little lip that holds the carrier part of the bracket to the back portion that hold the cams. This is a second funny angle for card to sit that makes my eyes upset. Also, while building, if you tilt your case to the left or flip it upside down, the cams will just slide off and the card will be dislodged. If there was a lip on the bracket that the bottom of the cams could slide into once locked, this would be ten times more functional.Problem #3: Cosmetics. Cutting "Designed by Cooler Master" into the bracket looks cool in a picture, but once you install your card in the bracket you'll never see that again. Anyone actually trained in design would have noticed that. This is in no way any kind of major issue, but its just one more thing that makes this whole assembly look like no thought was put into it at all. It all looks satisfyingly complex as if its design will solve some sort of problems, once you get it installed you have to fuss around with everything to get it looking kind of ok even though thats pretty temporary. There's no feeling of "that's not going anywhere" that you might expect from spending $70 on a steel bracket built to support a two pound piece of electronics.At the end of the day, I don't think there's another bracket available on Amazon that will be any better, so I discarded the backer part of the bracket and drilled a few holes in the bottom of the carrier and mounted it on some standoffs I installed in the floor of the case. I got to put the card where I wanted it and it sits square and true. If I ever need to mess with the cable connections I'll just remove the screw and pop the card out of its slot I guess.Its really a shame Cooler Master can't be bothered to just make a nice, solid mounting bracket instead of what basically amounts to a mess. Instead of buying this I would definitely recommend just spending a little more money on a case with vertical GPU mounting built in.

Phenomenonal product. Stable, minimal sag. I bought this for my 011D Evo XL case. The brackets on these cases are the magnetic, but if you look on the spot that mounts to your case you'll see 2 little outlined circles just above and below each hole (see photo) so I drilled the holes out, smoothed it out with a Dremel and it's a perfect, snug fit to the case and the magnetic latches on the rear still close properly. If you do extend it too far out, I'd recommend a GPU sag mount if your GPU didn't come with one. I saw several people commenting how this doesn't fit the Dynamic Evo XL case so I was skeptical, but it looks amazing and fits with about 3 minutes worth of modding.