ErGear 48 X 24 Inch Height Adjustable Electric Standing Desk, Black

I just received the desk and it took me about 40 mins to put it together on my own. Instructions were cleared and all the parts were there. It feels very good quality and its stable! Its super spacious, I have two monitors plus my laptop and I still have room for more things. I love that you can save your height set up! Makes it easier to go up and down.

I’ll start by saying a riser desk is a health requirement! After 3 years of sitting and working from home I developed a SEVERE case of sciatic pain and probably some nerve damage. I started going in the office once a week and started standing with my office riser desk. Although it was a little uncomfortable standing I stood for about 4 hours and the pain became less uncomfortable. Sitting forces everyone to lean forward which puts a lot of strain on your back and neck. I have an office set up downstairs with an executive desk so the days the sciatic pain was too bad I wanted/needed something upstairs. This riser desk is perfect in many ways: it rises higher than I expected (definitely higher than the one in my office), probably goes lower than I need, has 3 self-programmable settings, is easy to assemble, has storage hooks on both sides of the desk, a cable management “tray” and is a third of the price for a similar riser desk at a brick and mortar store. As for assembly. The box and packaging was perfect with lots of foam cushioning so nothing was dented or damaged. The instructions were clear where it was needed and the illustrations were large so I didn’t accidentally connect anything in the wrong direction. There was even a business sized card with a QR code to watch an installation video. I didn’t use it or need it so I can’t really comment on that. The desktop comes in 2 sections, but it appears that the way you install it makes it very sturdy. It says the desktop will hold 176 pounds. The one advice I’ll add is it say to use a screwdriver or drill for assembling the top. The holes are tight so if using a screwdriver make sure the Phillips end isn’t chipped. You’ll also need a good grip and strong wrist. Yup, it’s that tight!!! Because I have nerve damage I started with the screwdriver and finished it with a screwdriver drill - an electric screwdriver doesn’t have enough torque to do this job. The 2 center screws by the legs you may need to use only a screwdriver as it’s hard to get a drill in there. Also it’s almost impossible to mess up the screw heads with a drill, but make sure you the correct sized screwdriver bit to get a good “bite” on the screw. I set mine up by myself in about 45 minutes. This desk comes in multiple sizes and colors so you cannot go wrong on a pick unless your spouse tells you that you picked the wrong color. Just had to take another glance at mine. LOL Not much else to add except I would recommend getting a drafting stool for health reasons and for easier transitioning from sitting to standing and an anti-fatigue mat to stand on. Hope this helps anyone reading it. I’ll add some pictures after I order some additional monitors and set up my new desk.

I am in love with this desk! I recently started a remote job and wanted a simple stand up desk. It was time consuming but easy to assemble thanks to the clear picture instructions. It is very sturdy & holds my 2 monitors, a laptop, docking station, keyboard & mouse perfectly fine. But my favorite part is the stand up feature!! This desk is so simple to change from sitting to standing. The electronics are simple to use and sturdy, so I know my equipment is safe while the desk moves up and down. It also moves up & down at the perfect speed. It’s not too fast or too slow. I absolutely love it! I’d recommend this desk to anyone looking for a simple yet sturdy stand up desk. I am very pleased with it!

I caught this on sale , but I would buy it for full price. The quality is good. The construction of it took about an hour and I does what it is supposed to do. I have had no problems with the mechanism. My only issue is the measurements are off about an inch. I paid for 48 X 24 and that’s what I should have got. Other than that this product seems great so far.

I bought this desk specifically for my Cricut station, and it's been exactly what I was hoping for. The 48" x 24" size gives me enough room for my Cricut, mat, and the projects I'm working on without taking up a huge amount of space. The height adjustment is smooth, and being able to switch between sitting and standing is a nice bonus during longer crafting sessions. Assembly was straightforward, and the desk feels sturdy once everything is put together. The white finish also looks clean and bright, which fits really well in my craft space. If you're looking for an affordable standing desk for crafting, a Cricut setup, or a small home office, I'd definitely recommend this one.

Haven’t owned this for more than a few months, I will update later if it’s held up. So far it’s great! Easy to put together, sturdy (holds two full size monitors, a plant, and two laptops) with plenty of room for a keyboard and mouse area. It’s comfortable, sits very well and I like the option to stand instead of sit.

Simple. Perfect. Elegant. Sturdy material and easy to out together. The desk I have been needing for awhile. Easy to use and set height settings. Worth the money to me. Been using for about 2 weeks, no parts missing when arrived.

I have had this standing desk for roughly 1 and half years, am still currently using it, and have enjoyed it. This standing desk is quite stable and holds a lot of weight. I currently have 3 monitors mounted near the back of the desk and a medium sized computer mounted on the side of the desk (probably comes out to around 50 pounds) which are all easily lifted by the motor, although it is a tiny bit noisy, but won't really matter if you don't move it every 10 seconds. This thing lifts the desk top with ease. The height goes up well above a standard standing height and goes down to a lowered chair level, so it's height is very adjustable. Building the desk also didn't take very long, so getting this thing up and running shouldn't be too big of a deal. I did like the fact that the desk came with some cable guides to route the cables for the motor and interface. The interface is also very easy to use and has 4 different presets for heights you want to save. There were 2 things I wasn't too happy about which is why it's getting a 4 star though. Number 1, the desk top is in 2 pieces and gets assembled when you build it, which is fine because it makes the shipping easier, but still would've liked to have 1 solid top. Number 2, the desk can be a little bit wobbly (mostly at higher heights), mainly because there are only 2 points of contact for the feet/legs instead of 4. I could just be nitpicking though and you may not care that much. At the time of this review the desk is around $150 USD which is really nothing to complain about especially with all it offers. Overall the desk is a great buy especially for the price and I would recommend it for anyone that wants to get a standing desk without having to fork out a bunch of money for it.

Oh my god the screws are so bad ! Almost impossible to make a clean build without an electronic screwdriver. Anyways I damaged them all in the process so it will be a single use table. I don’t recommend.

I needed a small, compact desk to fit into a cubby hole for working from home, and I also wanted the option of a standing desk without spending a fortune. After seeing generally good reviews, I decided to take a chance on this one, despite a few comments about assembly and stability concerns. Assembly Assembly was surprisingly straightforward. My partner and I are both not particularly handy with DIY, but we managed it in around an hour. Instructions were clear enough and it was mostly just a lot of screws. We didn’t use a power drill, even though it was suggested, and it was still totally fine to build by hand. Build and design One thing mentioned in other reviews is the join in the desktop (as it comes in two pieces). Yes, you can faintly see the line if you look closely, but in my opinion it’s a non-issue and doesn’t affect use or appearance day to day. The size is perfect for what I needed. It comfortably fits both my PC monitor and laptop, even though I went for the smaller version. Electric standing function The electric height adjustment is very easy to use. It runs smoothly and quietly, and the height range is more than enough for me at 5'7", with plenty of extra room for someone taller as well. Stability It feels solid in normal use. There is a very slight wobble if you’re typing quite aggressively, but nothing distracting or concerning. I wouldn’t lean heavily on it, but for everyday working it feels stable and reliable. Overall I’ve only been using it for a couple of weeks, but so far I’m genuinely impressed. Easy setup, good functionality, and great value for the price. Would definitely recommend if you want a compact standing desk without spending a lot.

Value for price paid on Amazon

It's easy to build, if you have a drill or tools. For now, it's all good and the item perfectly working.

Great budget standing desk ! was easy to assemble and configure ! holds 4 height settings and the cord length is reasonable. My only complaint is that the main desktop is in 2 pieces, at first I was concerned about it leaning over time, however it hasn't and its been about 7 months now (time of writing this review), with the 2 pieces however it does cause a slight shake with my monitor stand strapped to the back of one of the panels, I'm sure with more weight on the desktop it may not be as noticeable or with monitors on stands, but felt the need to point it out. Overall for the price and the build, I am happy with it.