AZZUNO 200A MIG Welder,110V/220V 4 in 1 Gas/Flux Gasless MIG/Lift TIG/Stick | Dual Voltage, 4 in 1 Multiprocess Welder with Flux Core MIG/Gas MIG/Lift TIG/Stick ARC Welder

I was going to return it because the trigger constantly hung up. The problem was in the trigger itself. I hate returning stuff so I kept working with it and finally the trigger quit sticking. So. I have tried twice to contact customer support and never received a reply. I see there is supposed to be a much better PDF manual which I would like to get but there is no point in contacting Azzuno a third time. UPDATE: Azzuno contacted me and offered a full refund. For some reason my attempts to reach them through their CONTACT US never reached them. Upon seeing my review however they reached out to me. My main interest in this welder is for light gauge metals up to 1/8". I am still in the learning curve but it has proven it can make some buttery smooth welds that penetrate well. For the money I think this is a great value. This is the new outside frame for a ramp on my 5X11 trailer. Next I will weld in the internal braces and finally the expanded metal skin. This welder gives me confidence for this light gauge work I never had with my flux core welder which runs way too hot for this kind of work. Addendum: Go through your ground clamp and tighten everything up including the crimped on ring eye. My Azzuno started stacking up weld and not penetrating. I figured it might be the ground side and sure enough every part of it was loose. Take the few minutes and get that thing tight. Update: I'm several months out now and I continue to be pleased with this welder. I'm running .023 wire with the standard co2/argon mix. This setup will require you to purchase a feed roller and gun tips for .023 wire, and a gas bottle and regulator. It's worth it. I'm not sure but I don't think there are factory settings for .023 on gas. I have learned to use 10 amp at 20 volts as kind of a baseline with this setup and go up or down from there. Two projects lately have put the ability of this welder to handle thin material to the test. I am the weak link as the welder can do what I ask of it. It is really fascinating to watch the arc pulse according to what settings I'm using. I can literally see and hear the pulsing. It's like this welder knows what needs to happen. The welders automatic feed speed seems pretty good, I haven't had any problems with feed speed. ADDENDUM, March 2025 I bought Azzuno's tig kit and a bottle of argon. Most of what I weld is small stuff and the ability to slow down the weld process, which tig does, finally got me to pull the trigger on purchasing that big bottle of argon and learning to tig. This is touch start. It isn't as sophisticated as some tig only welders but this Azzuno absolutely will tig. Given the Azzuno will get you started tig-ing for minimal expense it is a good way to get started. The picture is a practice weld just learning what to do and not do and how it all works. It's like gas welding with electricity except incredibly better heat control. I can change the Azzuno 1 amp and on thin material see the difference, so you can really dial it in. The tig feature is free on this welder so what's not to like? It is DC only, so steel welding only - but it will get you started and let you learn for minimal investment if you, like me, already own one.

I purchased my first Azzuno 200f over 2 years ago. This welder is very easy to figure out and learn welding. It has plenty of power to tackle what ever you throw at it. It is very good with mig and flux core. I've had no feeding issues and I have not had it over heat a single time. The stick function is great. I've even welded with 3/16 7018 and it did great. This is a very durable welder as I've used it almost daily for 2 years and not a single problem. Here are some suggestions before or after you buy one: You will need to upgrade not only the ground clamp but the electrode holder as well. They are the basic issue and are not very good quality. I also upgraded the cables to these to #2 and made them longer. If Azzuno were to make 1 change to this welder , it would be to install a light inside the door to the wire compartment. I'm very pleased with this welder and I highly recommend.

I bought this on a whim - needed a 200A MIG welder for a project (I mostly do TIG) and stumbled on this here at Amazon. Great price to be sure. Surprisingly, this thing works great! I have no idea how long it is going to hold up, but unlike cheap import plasma cutters, this thing seems very well constructed in terms of fit and finish, has a good solid stable arc, feeds smoothly... I'm impressed considering the price. PROS: - Fired up right out of the box with most things obvious to anyone who's done MIG before. - Does Flux core as well as MIG - Handles 10# spools of wire - Has some presets for different size wire and can handle .025", .030", .035" and .045". Comes with all necessary drive wheels for both solid and flux-core wire. - The torch is far better than I expected with a Euro-style connector. - The machine can also do lift-TIG and stick welding. Stick stinger supplied but no TIG torch. CONS: (some pretty big ones unfortunately) - The manual is utter crap - literally one of the worst manuals I've encountered. There are features that are in the machine that are completely unexplained or referenced. Presets aren't mentioned at all nor is the behavior of various other features like Inductance, Arc Force and others. No details or explanations whatsoever - just a comment that the voltage knob controls inductance when in preset mode and the wire feed knob controls arc force when stick welding. Literally a ridiculous manual. - As far as I can tell, there is no website, no tech support, no phone #, no nuthin' - although they do purport to provide a 1 year warranty. - wire feed rate is in METERS PER MINUTE! No way to change it either. If you're in the US, you'll need to divide inches/minute by 39.37 to get the proper feed speed. - Gas inlet is a 1/4" hose barb instead of a standard flare gas fitting. You'll need to make an adapter. There are multiple Youtube videos that describe it - older Everlast machines had the same issue. - Control panel consists of rotary encoders and membrane buttons. OK I suppose in general but I've never been impressed with the long term reliability of membrane keypads. This may be just me being picky, but that kind of keypad is on my washing machine and it is wearing out after 10 years. YMMV Again, I can't stress enough my caution concerning the apparent lack of any support website whatsoever. I'm not sad at all about buying this - I am a relatively sophisticated buyer. I do think this would be a great machine for a hobbyist/home shop kind of thing or even light commercial work. If the documentation and tech support was there I would whole-heartedly recommend to a beginner

I have never MIG welded before today. I'd ordered the Azzuno 135 gasless welder, before I was amazed to find this model for not too much more money. Cancelled the 135 and ordered this one instead. It arrived quickly, and immediately was stunned at how nicely made it was. Fit & finish were all good, knobs feel quality and all cables etc. seem sturdy. I reached out to Azzuno tech support via amazon, as I'd seen other reviewers mention there's an updated PDF version of the manual. Being totally new to welding I figured I needed all the help I can get. They responded in under an hour with the PDF attached. I had a 2 lb spool of wire that I bought separately, and was able to get it loaded by following the instructions. If like me you're new to this, the spool is similar to a weedeater line, i.e. it wants to unravel and go EVERYWHERE. Once I had switched the feed wheel over to the correct size, I hit the inch button and the wire fed through to the nozzle area. (I took off the nozzle and copper guide tube to make it easier). Put them back on and looked over the settings. I'd assumed that it would take hours of tweaking and testing settings to even be able to use a welder, but no. Simply select your process (I had flux core wire for which there seems to be far fewer settings than some other processes). Select the diameter of the wire from a couple of choices, and that was literally it. I thought I'd have to mess with the inductance dial but looks like that's for experts to override the machine's auto settings. I grabbed a couple of pieces of unknown angle iron and cleaned them up with a grinder. Popped on the ground clamp and wondered if I'd missed any steps, this all seemed too easy. Figured I'd give it a try and troubleshoot if it didn't work, but first pull of the trigger it zapped into life and I ran my first weld bead. Sure, It wasn't beautiful or straight (technique) but it looked like a weld. Keep in mind I have ZERO clue what I'm doing, I don't yet know how to make sure a weld isn't cold or if the penetration is good. I took a grinder to it and could not see where the weld ended and the base material began. Hopefully that's a good sign. It was barely any more difficult than using a hot glue gun. I am absolutely stunned that for this low of a price, and this quick and easy of a setup I've been able to add a welder to my toolset. I'd always assumed I would need to spend a few thousand dollars which was always my barrier to entry. If you're on the fence or are a beginner want to try out welding without spending a ton I would definitely recommend this machine.

Update (2/26/2024). Let me reiterate, I think this is a GOOD welder! My issue was a lack customer support. After this review was originally submitted, Azzuno contacted me immediately offering a full refund on the welder. I told them I had already returned the welder to Amazon for a refund. They offered to send me a new one free. I was floored by this offer. I have now received the new machine and will put it thru its paces. I know it performs well. After many emails with Azzuno, I can say, once you are able to get a hold of them, their customer support is top notch. They just need to look at any "Contacts Us" requests they receive thru their website and act promptly on them. That was my issue. That has since been resolved. I HIGHLY RECOMMEND THIS WELDER!!! Update (2/10/2024): Even though I've seen that others have been able to reach Azunno customer service, I've tried multiple time on their website "Contact Us" link with no response at all. Even for a request as simple as asking for a welding chart has gone unanswered. If you value customer support, after the sale, DON'T go with this welder. I guess it's live and learn. I guess I'll end up returning this welder and going with another brand. Sad, because I do like this welder. I mount a 2lbs roll of .035 flux core on the wire roll holder. I screw the retainer nut on to hold the roll. When I start feeding wire, the nut starts unscrewing and eventually just falls off allowing the wire roll to fall off and birds nest. It's like the bolt to hold the rolls is about 1"-1.5" to short. You can't put the spring on because it applies way to much resistance to the wire roll to unwind. Azunno is living up to their LACK of customer support. They won't return email inquiries. I can't believe they expect Amazon to be able to answer questions and problems like this. All Amazon can do is accept a return and/or refund you or send you a new product. It's sad because I've seen a lot of good review videos on this welder. Come on Azzuno! Step up with your customer support! You've got a pretty good product here. But lack of customer support is going to sink it.

Azzuno MiG 200 F. For the first 15-ish pounds of .035 flux core wire, this machine was great. From one weld to the next, wire feed speed started RACING, couldn’t slow it down. Reasearched and remedied all potential issues (really weren’t any except the motherboard). If motherboard is shot after 8 months, it’s not worth it. Throw away $180.

Well, I am certainly surprised with my MIG200 welder from Azzuno! I had hoped for a good purchasing experience, but we're all a little worried that there will be a hitch in the process. My 'hitch' was the shipping carrier not providing careful handling of my product. This resulted in a welder received with scratches on it's side (see 2nd image). This of course, was not a fault of the welder, but one of shipping. What you need to pick up on here is next. I contacted Azzuno through Amazon of course, and explained about the shipping scratches, and the booklet that came with the unit which had typing so small I couldn't read it. Being new to MIG, I would need to be able to use a well written user manual, but couldn't read the user booklet. But Azzuno attended to issues promptly. They immediately sent me a link to their user manual in PDF! I did recommend that they place that link on their ad web page. Azzuno also told me that they would replace the welder with a new one, which I received yesterday, double-boxed! The KEY here, if you've managed to stay with me this far is - There are literally dozens of companies out there selling 200 amp 4-in-1 welders, so which one do you go with? Yes the welders are not Exactly the same, but very close, so it ALWAYS comes down to SERVICE. It's not a perfect, so !@#$%^ happens! Therefore, you need to protect yourself with a company that not only makes a good welder, but also offers Great Service. And no, I don't have any associations with Azzzuno, I'm just a happy customer. Azzuno not replaced my welder with a new unit, but did it in a very timely manner. They didn't beat around the bush on it. I give them 5 stars on this because They Earned It. Now, onto the welder! It's a great welder so far Ample size digital Amp/Voltage readouts - a biggie for me 200 Amps - I've already arc welded and flux welded with it, and it was great. Need to get my gas tanks High Quality Cables - another biggie - I'm an engineer) - You could walk on these cables (but try not to) It's a little heavier than I imaged an inverter would be, but I've already made a nice welding cart so ok It performs well, and is an attractive piece of hardware, with the gas input in the rear (wanted that!) Has many 'auto' features (read them on the ad) that you will like, and comes with everything you'll need. All in all, I'm happy with this welder, and more importantly, very happy with this vendor! Azzuno will take care of you...

This thing is a beast for the price! I've done stick (MMA), MIG (GMAW), and flux cored with it. I even gave it a whirl with aluminum without a spool gun and it did okay just bird nests easily. Other processes it does great at! I've ran it on both 110v and 220v and it does well on both, however for stick welding 220v is a huge improvement. The stick didn't stick too much on 220v, but was a little hard to get started on 110v even with the anti-stick all the way up. I am certified in both stick and MIG so I'm not new to welding and know what to change when, and I will say, if you've never welded the controls are a bit weird to get used to, but once you get the hang of it it isn't bad. I also tried it on stainless, building an axle back exhaust for a friend, and it did well. I used pure Argon which is not quite correct for stainless, but that's what I had on hand and it worked. Great for a budget welder and good for light to medium duty welding! Highly recommend!

ممتازه

Muy buen producto precio calidad

FUE ENTREGADO CON LA CAJA DE AMAZZON ABIERTA DENTO LA CAJA DE PRODUCTO CERRADA Y AL REVISAR SIN FALTANTES DE ALGUNA PIEZA PROMETIDA. AUN NO ES PROBADA EN SU FUNCION, SERA HASTA MAÑANA CUANDO SE PRUEBE

al momento muy bien usada para soldar con electrodo revestido mma

Y es difícil contactar al vendedor porque no tiene ninguna dirección