6x4 FT Outdoor Shed, Metal Garden Shed Lockable Doors, Dark Gray | Double Lockable Doors, Anti-Corrosion, Waterproof, Fits Backyard/Patio/Lawn, Spacious Storage Clearance, Durable Steel

Good for the cost. Box was banged up, but contents were fine. Assembly absolutely requires two people and a step ladder, but pretty straightforward, just a lot of screws. Took two of us just over the estimated three hours with a few interruptions. Screw holes were mostly in the right spots, but the bends in the metal aren't very precise, so you have to sort of compress/rebend the metal sheets a little bit. Seems sturdy enough. A few notes: -it doesn't come with a floor -if you think you're missing a piece, make sure there's not two pieces stuck together -I'm not someone who usually lays out all the pieces before starting, but did it for this and it seemed worthwhile -it's not anything close to air tight and there are some big gaps in some places. Mostly concerned with spiders/critters getting in, so will probably try to seal bigger gaps. -the dimensions (i.e. 6' x 4') are not only external frame dimensions (vs. internal dimensions), but are also rounded up. I think interior width is something like 42" (vs. expected 48"). That's sort of annoying, but not the biggest deal.

5 stars considering cost. Very pleasantly suprised with this. It's one of the, or the cheapest sheds on Amazon. Expecting terribly written instructions, flimsy material, and potentially (based on other review), a real PIA film to pull off every piece. But, I wanted something cheap, now, figuring I'd replace it after the first big storm hopefully last a year or two. And at first glance that seemed most likely right. Lots of pieces, lots of screws, thin material. But suprisingly, it went together fairly easily. Only a few pieces had the film, and I just left it on. Did it completely by myself, in a somewhat windy day. I wouldn't recommend that-another person would help mightily. And it is flimsy, until you get most of it together. It actually came together pretty sturdily. Even being on somewhat unlevel ground (I wouldn't recommend that unless absolutely necessary), the doors and all line up pretty well. All in all, exceeded my expectations for the price. Still not likely a "forever shed", but for what you pay for it is outstanding.

Oh boy....just finished assembly today. Only had four holes that were hard to align...I am gonna say it right now...some people need to stop trying to force stuff and if things aren't aligning realize they probably have something on backwards or on the wrong side. I am going to address problems people have/I had & pros. Cons: 1) plastic is excessive took litterally HOURS to take off, (possibly longer than assembly). I don't think some of the bars were in need of it...but they wrapped everything with coating. The doors were the hardest to take off coming off with seams everywhere in the plastic making there no strategy to peel plastic off in big chunks. 2) the bottom frame drove me nuts, the middle bars (the three of them going from front to back) didn't really fit snuggly, kept on falling out, and there wasn't a way to secure them in the cross bars. 3) there are four parts on this where they expect you to put a small screw through like 4/5 layers of misaligned metal pieces that are laying on top of each other. I was proud to get the first two after much struggling......the second two were impossible. We ran a wire through all of the holes and tied it... it's sufficient since it's the roof...but....not great. If we had felt like we had any more energy to put into this project we would have drilled some holes, but that would have eaten up more time/and two people. 4) Because I bought the larger shed, they just kinda tacked on a few extra lengths to the front of the frame/top. The top bar required you to put a plastic bit into the bar...it LITTERALLY didn't fit. I think this is what might have contributed to some of my misalignment since I shaved part of it down...and ended up shaving just a BIT too much off causing it to be a bit too loose and having it sag a slight bit. I felt like the extra pieces also caused some destabilization in the bottom of the frame. I really wish both pieces would have been one length. Pros: 1) Looks fairly nice 2) Cheaper than anything else we could find 3) Comes with plenty of extra hardware Neutral While I thought the directions were FINE their were points I struggled trying to decide orientation slowing me down, an additional sticker of top, left, right and such would have been helpful. The screws that you put the hinges on are fatter and omg...I struggled. A project I thought (even with the plastic) was going to take me a better part of a day....took me a weekend thanks partly to the freakishly hot weather, but mostly because I thought I would be done by the time it got hot! NOPE! Two mornings from like 6-12 so almost 12h to unpack and assemble by myself. Idk how...but yeah..... yikes. But as in most things it's time or money and we usually choose money........so I can't EXACTLY complain, but I do want y'all to have realistic expectations about how long this is going to take..... Would I do it again? I guess if I had realistic expectations of the amount of time it was going to take......we had other things that needed done this weekend and the kids need attention too...and we're all sick and it wasn't exactly fun, and I basically wanted to cry from all the plastic by the time I got to the doors and realized how bad they were.

First, I want to state I have not been compensated in any way for this review - I paid full price for the 6x4 shed and just wanted to provide my experience putting it together and clear up some misconceptions about the shed. With that said, I have to say, the manufacturer of this shed made it super easy to assemble it: well-written instructions with easy to identify illustrations, and hardware components clearly identified within a bag for each one. In years past, I've seen nuts, screws, bolts, washers, etc. all thrown together in one bag where you then have to spend 30 to 45 minutes separating everything and putting them in order so that you can readily identify and access them - it was a nightmare. Not so with this shed, the manufacturer did a great job separating and identifying everything - it was super easy to put together. I read some reviews where folks were stating the holes did not align and they had to drill holes in order to put the shed together. The same thing happened to me, but I figured out what I did wrong: I switched parts from the left side to the right side and nothing was lining up - once I discovered the error and corrected it, the holes aligned perfectly. Since the side panels have an "accordion-style" construction, you just need to move that small section of the panel to get the holes to align. The shed was ridiculously easy to put together: I did it by myself and it took me just 3 hours to build it (the wood floor, framing, and shelves took about an extra hour). But I am experienced at this and I use certain tools that the average person may not have, such as an impact driver with which I can swap driver bits quickly for the different types of screws, a circular saw and oscillating tool for undertaking the internal wood framing (optional for some folks), and self-tapping screws (for wood floor and framing). As you can see from the pictures (I've numbered them from 1 thru 9), I laid out the parts on a table, started with the floor frame, then the corner panels, then the upper braces, then the side panels, then the roof and doors, and finally, the internal wood framing where I added a floor and shelves (which are attached to the wood frame and floor). I found the hardware to be of good quality and the door hinges were excellent: very solid and heavy duty, not cheap and flimsy. The manufacturer provided extra screws, bolts, nuts, and washers (because we all tend to lose a few here and there), and was also extremely thoughtful and provided a bag of screw thread covers to protect you from accidentally stabbing yourself with the screw points if you're working inside the shed. I have to say, putting the shed together was a very pleasant experience - I was expecting a nightmarish hell based on my prior experience and some of the reviews, but I was pleasantly surprised at how easy it was. If you follow the instructions, take your time, drink plenty of water, and don't accidentally swap parts (like I did), you should have an easy build and a great looking shed as well. I can definitely recommend this shed to everyone.

It’s a nice shed but…. The amount of plastic covering all the pieces is absolutely ridiculous, and it’s a pain to takeoff. I would’ve left it on in just assembled the shed, however, it would’ve started to get sun roasted and looked like a sunburn patient. They would’ve been better off, spending the money to package the item to protect it from dents. Several panels are dented to the point I just had to leave them or risk more damage. Another note is the screws easily strip out even with a hand screwdriver. I worry about the longevity of the shed.

This is unbeatable for the price. I recognize there are some in the comments that disagree but I did my research and in comparison to what else is out there. This is a really great shed. I built a solid foundation, a platform in a shed and my 10-year-old helped me. It took us about 3 or 4 hours over 2 days.

Cute shed but just know this will likely take 5-6 hours and not 3 hours (one star removed) as the manual states with 2 adults assembling. Watch the video as you go along with assembly. The manual is wrong as soon as you get to the roof, it has to be flipped around (one star deducted)- follow the video here and look at the Amazon picture of what you purchased to see. Some screws were missing so we used the extra f1’s that were given (half star deducted). The video also shows that there are some metal pieces that should be placed along the bottom- we did not receive these pieces and the manual does not show this step. In all I think 2.5 stars would be fair. The shed itself is cute but just know this thing was a nightmare to put together! The roof pieces first didn’t align as the manual is wrong, they also kept falling causing them to dent & the screw holes to be larger when we finally got this step right and the roofing to align. Anyways I’m glad it’s done because that was a total nightmare- thankfully this will be in a carport and not exposed to the elements because who knows if the roof would blow off because of this (that would not be good). Shipping was quick arrived in 2 days, Amazon stated within 4-6 days which was a bonus!

This shed was surprisingly easy to assemble but I suggest you use 2 people. 1 to put in screws and the other to assist holding and reading the easy to follow step-by-step instructions. I reccomed you open the box, lay each piece on ground and arrange in order. Each piece has a sticker on it. Some items look alike but you still need to separate each item so you can locate the sticker numbers. While you do that have your helper separate all the white vinyl washers that go on all the external screws. A 6 foot ladder, cordless drill with Phillips tip bit and a pair of Pliers or small Cresent Wrench and a awl to line up a few of the holes on the corner panels that are a little difficult. Assemble it in-place since moving it with two people is not easy without damaging it unless just for a small alignment move. I was very impressed as to the instructions and ease to build along with the QUALITY of the material. Also, they include a couple pairs of gloves. I suggest they are used when installing the panels or moving the assembled shed. I did not use the gloves while putting in the screws since I had to hold the small screws and put the vinyl washer on each before screwing in. I did get a few cuts from the sharp edges but that was my fault. You also get a Quality padlock with 3 keys. It took us a little less than 3 hours to put this together. I also just placed it on a gravel pad and bought a 3/4 piece of 4×8 foot Treated Plywood that cut to size with a circular saw. I laid the Plywood in place and screwed it into the corners and a few self-tapping sheet metal screws around the edges to keep it in place. I am very happy with this sheds quality and may buy a 2d one.

Bought this product, checked all parts before assembly but once assembled the doors don't fit as they too large for this shed. Not the right doors. Obviously they knew this. Seller Botley will not replace the doors, only want the whole product back! It's assembled so not happening. Their solution was to offer me $10 off my next purchase- no solution! Don't buy anything from them!!

Full Order was never received