Teexpert Crystal Clear Epoxy Resin Kit 1 Gallon Self-Leveling Coating and Casting Resin, High-Gloss & Bubbles Free Resin and Hardener Kit for DIY Art, Jewelry, Table Top, Molds, Wood 1:1 Ratio

Easy to use pump bottles, dries hard & clear, have made dozens of things out of what was in these bottles.

From my experience, this company is true to their claims in regard to VOC's. I have an air purifier, and it did not turn on once during the entire mixing/curing process. Thank you! It feels good to know you care about our health!

I can’t emphasize enough the ease of use and quality of product. I wish I knew about this epoxy years ago because now I’m finding all sorts of uses for it took me a while to remember why I originally bought it. I’m tempted to use some for hobby projects I never do. Because it’s so easy and crystal clear when I have had unused portions in the mixing container I’ve experimented with different things and it’s amazing. I’m thinking about cutting out photos and magazine pics there’s just so much. Two top takeaways. Ease of use and clarity. And it does an excellent job adhering to metal to patch dents. I could go on and on

I was about to quit playing with resin after going through way too much money and ruined products because of other resin types. Then I tried this one and "I'm back in business, baby!" It does need a bit of work, but the results have been a resin that release the bubbles better than anything else I've tried, so to my fellow newish resin enthusiast... Here's how I've had best success: 1) Measure the needed amount of each into separate cups (I use reusable hard plastic ones with lids, so I have less trash waste) and place them in some warm (not hot) water for 3-6 minutes depending on the amount. 2) Mix the A+B resin in a new cup. I use an electric resin mixer and it does have to be mixed a bit longer than other ones - really look for those stringy part in there! 3) Place the cup back into the warm water for 3-5 minutes. 4) Pour slowly and then use a toothpick or craft stick on the sides of your product to make sure no bubbles got stuck there. And remember, the deeper the project the harder a time bubbles have releasing, so work in layers if you must. 5) Do your usual heat gun/lighter tricks, and voila, you'll *most likely* have a nice mostly bubble free result! One last thing... This is a lower viscosity resin and works great in molds, but I found that it really wants to fall over the sides when used as a top layer on coaster for example (even after a 15-20 minute work time), so you may want to use it as the bottom layer and then top coat it with a thicker working resin or wait long enough till it's thickening up a good bit itself.

I've been using this resin to cast into silicone molds for about a month, and have had a lot of success with it. The pump bottles ensure that you're getting equal parts of each (resin+hardener) without requiring too much measuring when mixing, which saves a lot of headache and waste. The large size is affordable and I don't find myself running out of the product. It takes about a day to demold, and every piece I've made has hardened fully and perfectly, unlike some other resins that leave the casting malleable and flawed/useless. This resin is almost perfect, but I can't give it 5 stars because there are quite a few small/large air bubbles that formed in the final piece, requiring me to go back and fill them (no fault of my own, I assure you). I think if they can change the formula to cut the cure time in half, if possible, this might solve the issue. Great product overall~

"I’ve been working with epoxy resin for over 5 years, and Teexpert is the only brand I truly like. It doesn't yellow, it's a 1:1 ratio, and it's very easy to mix. It has never let me down, and I’ve never had a single issue with it. I’ve tried several different brands, but Teexpert is definitely the one that best suits my work. I highly recommend it; it has consistently delivered great results."

***SECOND EDIT**** THE SECOND BATCH THAT THE COMPANY SENT TO ME WORKED LIKE A CHARM. I AM GRATEFUL FOR THE REACH OUT - AND THE REPLACEMENT PRODUCT. I HAVE BEEN ABLE TO MAKE KEY RINGS, NECLACES, AND EARRINGS. I DECIDED TO USE THIS PRODUCT BECAUSE IHAVE HAD PROBLEMS WITH BUBBLES SITTING IN THE MOLDS, AS WELL AS CLOUDING MY CLEAR CASTS. FORTUNATLEY THIS LAST BATCH HAS NOT HAD THAT PROBLEM. **** ****COMPANY CONTACTED ME AND SENT ME REPLACEMENT BATCH. I HAVE NOT HAD A MOMENT TO USE THE NEW BATCH DUE TO OTHER CIRCUMSTANCES, HOWEVER THE COMPANY HAS FOLLOWED UP WITH ME ASKING FOR PHOTOS OF THE PROJECTS THAT DID NOT WORK TO SEND TO R&D. HOPEFULLY THIS NEXT BATCH WILL BE PERFET. WILL UPDATE REVIEW WHEN I AM ABLE TO TEST PRODUCT.*** I loved the idea of the pump - for better accuracy in measuring the epoxy and hardener - I even bought two! NOTHING I mean NOTHING has set. I measured accurately, and even double checked my measurements after the first batch failed. I emailed the email address from the seller's information page and have yet to receive a response. This was referred by an influencer I follow on Youtube, and I feel he earnestly suggested this resin in good faith as I have followed his advice for over a year now. I thought that maybe my first batch was a bad batch, nope, opened the second batch I ordered and measuring extremely accurately, because of my results in the previous two pours. STILL did not set, everything is floppy. I hate to give bad reviews, because I understand how much reviews mean. I am just disappointed in the product - its results are different than the influencer was able to demonstrate.

Hands down my favorite resin. About two yrs ago all the resiners on YouTube were raving about this product. Now because of other free resin they get so they will recommend it, this one seems to have been forgotten. I have no problem with bubbles as it cures clear producing a professional look. I have tried the other popular brand that is now being pushed and just haven’t had as good results. Teexpert has a great product.

Good

Best resin to use. Definitely recommend. Easy to use with little to no bubbles.

The product is good but the packaging says NO SHIPPING COSTS. I was charged two shipping costs.