2021-2026 F150 Screen Protector for Ford F-150 (STX/XLT/Lariat/Platinum/Limited/Tremor/Raptor/King Ranch) SYNC4 12-inch Touchscreen, Tempered Glass 2023 2024 2025 F150 Pickup Accessories 12"

I was sceptical about this product since I used one of these on my truck before (different make). I only got one (like this one) and with all the steps I still ended up with dust under the glass and an air bubble I couldn't get out. It was also glossy and didn't function as I had intended. This version was possibly equally as annoying, but I was wrong. It installed easily, had all the items needed to set the screen protector properly and the mat finish is a delight. The install was bubble-free and I am very happy with it. The size is a perfect fit (unlike the last one), which is flush to all the sides and there is no interference with the touch functions of the screen. If I am to share any tips: take your time, try and do it without the air blowing, but also without the door open, use every tool they have: cleaner, microfiber cloth, the dust stickers, and the alignment sticker.

This was Very east to put on, left no bubbles is holding up very well so far, the size is perfect and the price is very reasonable

Wonderful screen protector! I ordered the matte screen protector, and it really helps reduce glare while still keeping the screen sharp and super responsive. I had perfect fitment with mine, and I am thrilled with the overall quality.. literally everything is absolutely perfect and very high quality. NOTE: if you have any doubt about glare or don’t like finger prints… get the matte screen protector and don’t overthink it! See my full review for a perfect install! For a perfect install: 1. Clean screen with wet wipe provided. 2. Quickly Use provided microfiber cloth to wipe away residue from the wet wipe. Make another pass with the microfiber to ensure smudges and residue are completely off. 3. Peel large dust removal sticker that was provided, quickly make passes with half the sticker attaching to the cleaned screen then immediately peel off (rapidly). Make three or four complete passes over the whole screen with the sticker overlapping each row to ensure all dust is picked up (the quicker the better). 4. Put the screen protector in your palm upside down (red tab facing you) Peel off the red tab on the screen protector labeled #1. DO NOT REMOVE THE YELLOW PART OF THE SCREEN PROTECTOR. This is what you will use to help align your screen protector. 5. Pick up the screen protector from the yellow pull tab from the top, and really try and be careful with aligning the screen properly mainly focus on the top left and top right corners as the bottom will be perfect if you get the two top corners perfect.… and that’s it.. super easy. When it’s on, you can peel off the yellow tab, and use the microfiber cloth to get rid of any bubbles.

Excellent investment, installed really easily, looks great, and the protection is really important. Didn’t do this simple on my previous truck screen and you could really tell it ☹️

The application of the screen protector was easy with the instructions. The top tape to help place the protector had to be put on the buttons above the screen, but it worked fine. The glass is the perfect size and unless you know it is there, you can’t tell the difference from the glass of the truck.

Put this on before I left the dealership. Easy on. Holding up well. Can’t even tell it’s there.

Great product - highest quality and easy to install on my F150. Perfect protection for my touch-screen.

The fit has little gaps (almost unnoticeable unless you look for them) and fingerprints are highly diminished so the appearance is very acceptable. I wanted to give this a 5 star... but could 4 was the tops and even thought of a 3... WHY? it is terrible to install. The sticker to hold it and align in place was worthless. The wipe was hard and dry and the polish cloth was useless and did not remove anything. I mean newsprint paper would have cleaned the screen better. Ended up using windex and a clean microfiber cloth. The only item in the "install" parts that worked like it should have was the little dust stickers to pick up the fine dust. I ended up peeling off after the first install and re installed by lining up the left side and slowly allowing it to adhere itself as i let it attach to the screen. Then as it was adhering I used my finders to push out the air bubbles and get a clean install. What should have been a 2 minute job turned in to about a 15 min ordeal.

Fits our 2025 Ford F-150 with the 12-inch screen perfectly. Installation was pretty simple overall—definitely easier with a second set of eyes to help spot bubbles (I couldn’t see any myself 😂). Once on, it looks great and doesn’t affect screen clarity or touch response at all. You can already see it doing its job protecting against constant finger pokes, smudges, and dust. If you’ve got a 2021–2026 F-150 with the 12" screen, this is a solid buy and well worth it.

Super easy to install and looks great. Gets rid of the glare as stated

Perfect fit

Liked

Easy install, good product, does as described