VEVOR 2200lbs Electric Hoist with Wireless Remote Control,110v Electric Hoist with Remote Control, 40ft/20ft Lifting Height & Motor, for Garage Warehouse Factory

this Hoist works very good, I would recomend it because you can activate it remotely without danger. I was able to lift 1300lbs with no issues. totally recomended.

Very good product and the price is also good. I'm going to get a lot of use from the hoist

I bought this to make a garage elevator up to my 2nd story storage area. The thing works great. I would buy again without hesitation.

Overall, this is an acceptable product. The quality is on the lower side. The threads to mount the hoist to a base plate had 2 nuts that needed retapped with a M12-1.75 I believe due to spatter from the welding process. On a similar note the spool where the cable wraps around had considerable spatter from the welding process process. I had to grind that off and repaint it so the spatter would not be able to damage the steel cable.(Though I’m not sure it would have) The weight is reasonable as long as you are able bodied. I think for the money it is a reasonably good product. I’m using it to lift my US Towers TX-455 up and down for Amateur Radio. I will include photos. I will update with a video when full installation is complete.

This is a serious piece of equipment. Weighs about 45 pounds, and with the trolley I used for I beam mounting was about 80 lbs. I tapped a 1/4-20 hole on the top to mount the bracket for the controller. Getting it up in the air and stable took some time and rigging. Works well, but the red safety donut on the hoist is undersized and can pop through the catch that triggers the hoist to stop when it is fully retracted, allowing it to keep winding. This could wreck your line, or worse, cause the load it’s holding to release. I added a larger diameter ring to make sure the safety stop triggers (white disk in pic).

The hoist was everything I hoped for.A strong hoist at a very good price.

I bought this as a lift to pick material from ground level to my loft in my shop along with general lifting needs in the shop. The lift speed of the winch and wireless remotes were the 2 promary factors in choosing it. It works exactly as advertised and the wireless remote has allowed me to work from either the lift from or lift to point. The wireless remote has never failed to be connected and work no matter how much plugging in or unplugging I do. I've only lifted up to around 1000lb with it but it did that with no issues. Normal lifts of 50- 300lbs don't even slow the lift speed down. I swapped the braided steel line for a synthetic rope and eventually put trolly wheels on it. Only issue with it is safety stop trigger is absolute garbage, so don't ever really on it to stop the winch.

Purchased and installed. Immediately, LOUD clunking noises as the hoist lifted the platform for which it was intended. Looking up online for suggestions, it recommended that the cable be wound firmly and without spaces so the cable would not FALL into a lower portion of the spooled cable. It is also recommended to unwind the entire cable and to rewind with firm pressure, and to make sure the cable does not wind irregularly, so that the cable does not fall from a high point to a lower point while being wound. While unwinding the entire cable, I found multiple KINKS, FLAT SPOTS (where the cable had been smashed), and a few broken wires. I have taken pictures and sent them to the manufacturer.

El polipasto funciona increíble! Es mejor que el de otras marcas y el precio es accesible