Mabett LED Interior Dome Lights 4Pcs Kit Fit Ford Bronco 2021 2022 2023 2024 Bronco Accessories 2/4 Door Easy Installation Hardtop/Softtop(Not for Sport)

I snagged these last week on sale, and they've been one of my favorite improvements to the Bronco! No more using my phone's flash to look around for things in the dark.Install was easy - under an hour (I had to remove my bimini mesh sunshade to properly tuck the wires above the airbags), and the wire harness connection meant I didn't need to do "real" wiring, or tap into my upfitter switches.Very bright, and works with my OEM lighting control. Shame Ford didn't add this sort of lighting on the MY2025's, because it really is necessary.

This upgrade by far has made the most difference of everything I have done to my Bronco. It fixes a big problem, you benefit from the solution every single day, and it wasn't that hard to install. That being said, the instructions were not very good and I had to do trial and error on where the lights mounted and in what order, but that said, it is so good! I would ditch the instructions when you get it, and watch a video. The hardest part is taking out the stock dome light without breaking it. If you do, just buy an upgrade aftermarket one which is the 2nd best upgrade I have done!

These lights are really bright. They're great when they are working correctly. And then they are not great when they malfunction.Sometimes the lights will turn on but they won't turn off. So at night, I have to drive around with the brightest interior lights in the world. Makes it difficult to see out the windows.Another thing to mention, Mabett is VERY difficult to contact. I've scoured their website for contact information - there isn't any. I've tried sending them messages on the forums - they haven't replied.I really want to love this product and sing their praises. But they're not working correctly and I can't get any assistance.

I originally bought the other brand of interior bronco lights, but my friend who is a mechanic and was going to install them for me, hesitated to cut any wire that leads to the computer so I ended up sending them back. I then watched a video on the Mabbitt lights And saw you did not have to cut any wires so I ordered them it took my friend about 25 to 30 minutes to install the lights. They work great. One of the YouTube videos had a tip about putting a little notch in behind one of the lights in order to not pinch the wires he did that with , the side of an electric drill bit worked well. So much brighter when the door is open or when you need light in the vehicle. I have a lot of Molly panels and other things in the vehicle so light does not reflect around as easily with the factory lights in the first place. Would absolutely purchase again . The nice thing was no using pry tools pretty much everything that had to come off was bolted on and bolted back in place. Only thing I missed in the video I watched was it connects to the rear cargo light which did make the whole process quite easy .

Got these for $73 before tax, which seems an OK price, but not GREAT for the materials. The hold downs are plastic, which is generally fine, but the front sits on top of my aftermarket grab handle. I torqued the screw for the handle and it seems solid, but I'd feel better if it were aluminum rather than plastic in that stack up. I greatly dislike working with interior plastics and wires, but installation was reasonable. The instructions stink, definitely look at some videos if you have questions. After install, I do tend to look right into the opposite side light when looking into the interior, which is not great for my night vision. Four things to note: 1) I think it would be easier to install when the top is off, 2) there are left and right side lights. Look at them closely as the LED panels inside are angled at 45 degrees and you want them facing down toward the cabin, 3) there is not many places in the stock plastics to get the wiring harness out at the light end which leaves some excess wire in the area of the removable roof panel clamp (I ran the wires outside the rear roof section bolt down clamp and will reassess the wiring the next time the roof is off, I may want to drill a hole in the plastic), and 4) the stock cargo light was a pain to remove and I mangled the stock retaining clip which are on the ends. If you can reach in under the plastic and push the clip inward while trying it out, it may help. That said, it is a pretty well thought out system and they are a huge improvement over stock lighting. The wiring harness was plenty long for a 2 door, not sure how that would be for a 4 door. The lights are not obtrusive looking. Here in the Pacific Northwest we live much of our lives in darkness and the stock Bronco lighting is very poor. I bought the cargo light, too, which I reviewed separately.

Installed on our 2024 bronco because we have two young kids and when we go on long drives we eat in the car, that being said we couldn’t see them with the factory lighting while eating (our little one takes big bites). Got these installed and we can see the full back row as well as having ample light for the front as well!

This is a clever solution for the lack of interior Bronco lighting. Connections are plug-and-play, and installation is REALLY easy if you fold back the soft top because you have clear access to any trim panels you might want to remove when running the wires.Only comment is that the trim removal tool was a bit soft. After giving it a couple tries I switched to using a trim tool I had in my toolbox to remove the rear light fixture. That's a minor issue that doesn't warrant a dropped rating as it's impressive that they include any tools in the first place.Good product. Good price. Easy install. There's nothing not to like.