Preciva Tyre Tread Depth Gauge UK, 0-25.4mm/Inch for Cars, Trucks, Blue

Finding out your tyres are bald while skidding on a wet or icy road is a horrific experience—whether you crash, hit someone, or simply terrify yourself and your passengers. A sudden emergency stop reveals the truth quickly; with deep tread, you’re safe; with low tread, you’re in trouble. Buying this device is a much cheaper alternative to an accident. ​This isn't catastrophising. Tread depth can be dangerously low without it being obvious to the naked eye. Owning this tool proves you’re taking responsibility for the only four points of contact between your car and the road. Don’t wait for a MOT or service to find a problem. ​Performance & Build: The product is small, simple, and affordable, providing perfectly readable digital results. While the battery life is unknown, the draw is so low it should last ages. (I’ve considered storing the battery externally with Blu-tack to avoid any potential leaks). ​Ease of Use: It’s incredibly quick. Turn it on, extend the spike, zero it on a flat surface, then push the spike into the tyre groove. It toggles easily between millimetres and inches. I performed a full "tyre audit" and discovered that after a puncture replacement, I needed to swap an 8mm rear tyre to the front to balance out the depths across the axles. ​The Essentials: ​Clear Display: Easy to read in low light. ​Well-Made: Feels sturdy, though not waterproof. ​Proactive: I’ll be finding a small case for it and setting a recurring reminder to check my depths. ​The Maths of Safety: On average, you get 2,000 to 4,000 miles per millimetre. While 1.6 mm is the legal minimum, 3 mm is considered the "professional basement" for safety. Don’t gamble on that last 1.4 mm. ​Verdict: Very pleased. Simple, effective, and essential.

Great price 5.99. Spare battery supplied-simple to use. Perfect!

I bought this tyre tread depth gauge to check my tyres before booking in for replacements, and it ended up saving me a good £250. What I thought were “near-limit” tyres still had plenty of legal tread left, so this paid for itself instantly. The gauge is easy to use and gives a clear digital reading in both mm and inches. Measurements seem consistent across all tyres, and it’s reassuring to have an actual number rather than relying on visual checks or the advice of a garage. The screen is clear and easy to read, even in low light. Build quality is decent for the price. It’s lightweight and feels a bit plasticky, but it does the job accurately enough for home checks. The zero/reset function works well, although it’s worth double-checking readings if you’re moving quickly between tyres. Overall, a very handy tool for anyone who wants to keep an eye on tyre wear and avoid unnecessary replacements. Not premium-grade, but excellent value and genuinely useful — just short of five stars.

Works well - no issues.

Great piece of kit. Not sure why I've never had one before being a keen driver who's always checking my pressures. Always just checked tread depth visually but that's difficult when you're working in such minute detail as mm. Kept getting different readings until I realised you had to zero it on a level surface before using to measure actual tread depth! Accurate, well made & extremely useful, especially before an MOT.

Perfect for the job simple to use

Not bad

Measuring with the depth is as expected with simplicity, 4stars not 5 as the power is easily turned off and calibration zeroed accidentally.

Shipment was delivered well in advance of the expected date. It’s super easy to use and extremely accurate. Highly recommended and will definitely purchase items from this seller again.

やはり正確な測定と言うか数字が欲しい。 価格が高いと買えないので色々物色していましたが、こちらが手頃かと選択 機能面では全く問題なく、また利用に関してはとても使いやすい 日々使う物ではありませんが、使いたい時にサッと使えるのは大事だと思います。

easy to use & easy to read. ditched my old manual "analog" gauge.

Un petit outils très pratique qu'on devrait tous avoir ! Packaging : 〰〰〰〰〰 La boîte contient : ⏺ L'appareil ⏺ Une pile de rechange LR44 ⏺ La notice Fonctionnalités: ⏺ Mesure la profondeur en mm au centième de mm ⏺ Possibilité de recalibrer par la touche "ZERO" ⏺ S'allume sois en appuant sur le bouton ON/OFF ou dès que l'on bouge la jauge ⏺ Affichage en mm ou en pouces 〰〰〰〰〰 Utilisation : 〰〰〰〰〰 Alors l'utilisation est simple mais il faut qu'elle soit bien faite: - Prenez le sillon le plus au milieu du pneu dans le sens de la largeur idéalement - Mesurez la profondeur là où il n'y a pas le témoin Il faut savoir qu'un pneu neuf fait normalement 8mm d'épaisseur au complet et le témoin est à 1.6mm, vous avez donc 6.4mm avant témoin. Donc, pour savoir l'état du pneu en % de votre pneu, vous prenez la mesure (appelée x) et: Usure (%) = 100x/8 (ex: 7mm restant = 100*7 / 8 = 87.5%) J'ai collé une petite étiquette derrière l'appareil pour me souvenir de toutes les infos utiles. Fini les entourloupes lors des achats, lors des visites au garage et c'est parfait sur circuit pour connaitre l'état de mes pneus. 〰〰〰〰〰 Conclusion : 〰〰〰〰〰 Un petit outil à avoir très efficace et pratique ! Si mon commentaire vous a été utile, prenez une milliseconde pour cliquez sur "oui" en dessous, ça motive à être précis et à prendre le temps de poster :)

First thing about this tread depth gauge is that is highly visible. Second, is that it came with a spare battery which is nice. Third is that the display is nice and big for viewing. Can be switched between inches and MM's. The instructions are clear and well written. Other than that it seems to be similar or the same as other tread depth gauges on amazon. You can't go wrong buying this gauge. No 32nds though, but I think if your measuring 32nds on a tire you should just change them out!