YITAMOTOR 2500lbs Clamp on Debris Forks Fits 48" Tractor Bucket Loader

Might just be my favorite accessory for my BX25 so far. And probably the least expensive. First impressions were admittedly mixed. Good design and heavy. But the hand bolts for tightening the main screws down had no business being in the set. They were beyond inadequate. I just use a wrench to tighten and remove as needed. Very solid attachment! I have on multiple occasions had small (6" diameter or so) getting caught between forks and I have been surprised that no fork has moved. I wouldn't have been surprised if I lost one or two but these have been rock solid. (On a BX25). Admittedly the Kubota is certainly limited in capabilities and a bigger tractor may well bend them with effort. But they are well matched for the Kubota! Im now considering a bigger one for my bigger tractor.

Update after a month of use. Awesome, new pictures added, could not carry that much tree debris before adding this cool addition to the bucket. Works great! 👍 We had an ice storm back in February, and of course spring growth needing to be cut back. Received it today, easy to install, feels quite sturdy. Loaded up with some limbs, this definitely makes it easier than just the bucket, much more room to carry. Even used it to scoop up brush. Really like this new addition to the tractor!

MUCH heavier duty than expected! But not exactly "spec". Distance between the far left and 2nd fork, was 10 3/4". Distance between the other forks was 11 1/4". This NORMALLY WOULD NOT be an issue, except that the forks themselves don't to such a great job in my particular situation. I KNOW that DIFFERENT areas have COMPLETELY different situations. For instance, I had property in NJ, where most of the property was heavily covered with "CLAY". So it was difficult to deal with, until I made a bar with TEETH I mounted to the front of my bucket loader! Just to "BITE" into the clay. Same tractor, same bucket loader and backhoe, the "SOIL" in FL is so SANDY, it's COMPLETELY DIFFERENT! In FL, it's NOT an issue of "DIGGING IN" like in NJ, it's an issue of "NOT DIGGING A HOLE WITH ALL 4 WHEELS" just trying to push forward. HOWEVER, BACK to THIS product and it's performance. Again, it's MUCH more ROBUST than I expected! BIG problem is that the forks are too far apart. I TRIED to pick up storm damaged branches, and they almost immediately fell through. I had to purchase 1" square tubing to make cross side brackets, then "MID" forks to PREVENT the material I was attempting to pick up from FALLING THROUGH the existing forks. This IS a QUALITY product!! Just not as precise, or purpose built for MY needs, so I had to modify it. REGARDLESS of your needs, THIS IS CERTAINLY a GREAT starting point to modify!! Oh yeah, the... "screw clamps".. The BOLT section is AWESOME!! SUPER heavy duty. The "TURN" bolts, found themselves "LOST" after about 10min. No biggie, just used a 3/8 ratchet handle as the "handle". Not sure THOSE bolts are even NECESSARY, given the screws themselves are SO ROBUST, as I said, simply using a 3/8 ratchet handle is PERFECT!!... and you don't have to worry about "WHERE DID THOSE BOLTS GO??"

I had my wife order these for me. I'm so glad I decided to give them a shot these forks changed the Branson loader into a completely different machine. I was able to complete 2 to 3 days of work in just a few hours. Very strong,easy to install and will work for many other uses.

Solid, Sturdy, and Easy to Use "Great value! These clamp-on forks are heavy steel and very well-constructed. They securely tighten onto my tractor bucket and held up perfectly while moving heavy, tangled brush piles. The powder coating is durable, and they feel like they will last forever. Highly recommend

These are heavy, and for the most part, well-made brush forks for your tractor bucket. I've used a similar product on my Kioti CK2610 for several years, and I can tell you that they definitely make removing brush piles and logs a heck of a lot easier. You can drive the forks into a brush pile and, in many instances, lift the pile without having to get off the tractor. They also substantially increase the capacity of the bucket, enabling you to move large piles of material in many fewer trips. I like that these forks have serviceable and removable "handles" for tightening the clamping bolts. This prevents brush from getting hung up on the handles when dumping a load. That's the good. Now for the potentially not-so-good. Although these forks are heavy and substantial, there are a three things you should take into consideration: 1. Although the forks clamp onto your bucket, they are only that--clamped. As you use them, the clamps loosen a bit and you'll notice the forks bouncing a bit over uneven surfaces. That's when you'll need to tighten them up again. 2. The clamping surface is small and as a result you'll eventually see indentations in your bucket at the clamping points. 3. The clamping arms (with the screw-down bolts) shown in the pictures are not representative of what I received. The picture shows an outside weld on the clamping arm as it meets the support tube. And the picture shows the tube as being proud of the arm by at least 3/8" of an inch. Instead, the product I received has the support tube flush with the clamping arm, and only a weld on the inside of the clamping arm. There is a visible gap between the tube and the arm, and not so much as a tack weld on the outside (the view you see in the pictures). There is a weld on the inside of the support arm where it meets the tube. As a result I predict that these forks, with moderate upward pressure and without additional reinforcing welds, will experience a separation of the tube from the support arm. If you have a welder or access to one, the last problem can be corrected. If you do not, you may want to steer clear of these forks.

Work phenomenal. Zero complaints definitely worth its weight in gold.. Has been used for far more things than it was designed for.

So far, these forks have worked great for scooping up large piles of brush and composted bedding from farm animals. I will have to add some lock-tite to keep the clamp-on bolts from getting loose, but otherwise, no complaints so far. My tractor only lifts 1300 lbs so I haven't been able to fully test the capability of these forks but they are heavy and appear to be good quality. These are a great value and add a lot more functionality to your tractor or loader.