Small Grow Tent 50x36x54cm for Hydroponic Grow System | High Reflective Mylar with Observation Window and Floor Tray for Hydroponic Indoor Plant Growing

Yes, I know this is supposed to be a growing tent for plants, but it's the perfect size to fit on the bench in my shed and insulate my two resin 3D printers from the cold.3D printer resin needs to be quite warm to work properly. Warmer than most British houses, and definitely warmer than the shed where my printers have been banished to. To be fair, the resin can be a bit smelly, and can make a mess everywhere.While the same could be said of Mrs. Z sometimes, it's the printers that have to live outside. I managed to find individual insulated covers for them, which do work really well, but the ultimate solution is this tent.I've taped 7-watt reptile mats to the metal cases of my printers, which easily hold the resin temperature at 25 degrees C under the dust covers. The inside of the tent is a little cooler, but still warm enough for any resin bottles stored in there to be useable. In the height of winter, I'll put a small heater tube in the tent.The tent is really well-designed. It has a solid framework which clips together. The outer cover fits perfectly, and it's possible to do it on your own but easier with help.There are zips and duct openings everywhere, which makes it really easy to run the power cables for the printers and heat mats out neatly and safely. The openings that are not in use can be sealed up completely, so there's no chance of the heat escaping. If you wanted to use ducts for fume extraction, the openings are the exact size for an inline fan.Because my printers are in an outdoor shed, I'm not particularly concerned about fumes. However, it is nice to be able to work in the shed, knowing that the fumes of the resin are contained inside the tent. In the long-term, I'll add a small extractor fan so I can purge the fumes outside before I open the front.The front door zips open all the way around, and even onto the side panel, so you have total access to everything inside. There's even a pocket inside for your spatula and scraper. Considering it was designed for plants, it couldn't be any better for 3D printers. It even has a spill mat inside.The tent was amazing value - one of the cheapest I could find. Even so, it's still really strong fabric and well-made. I'm really happy with it and I highly recommend it. I have written thousands of reviews for Amazon products, and I genuinely think this is one of the best things I've reviewed. I'm not being paid to say that - I bought this with my own money. it's just exactly what I wanted, which is pretty rare these days!

Really happy with this little propagation tent. The only thing it's missing is a tiny viewing window as I have this under my desk and would like to be able to see inside without having to unzip but I really can't complain

In an age where any enclosed canvas structure with a ventilation port is immediately assumed to be a shrine to certain botanical pursuits, I feel compelled to offer a more measured account of the Vivosun 2×2 grow tent.Yes, it is sturdy. Yes, it is discreet. Yes, it arrives with the sort of fittings that might cause a passing constable to raise an eyebrow. But let it be known that this tent is also a magnificent tool for the entirely lawful and deeply wholesome act of starting one’s fruit and vegetable seedlings early in the year.My tomatoes, cucumbers, peppers, broccoli, and strawberries have all enjoyed the sort of microclimate normally reserved for tropical holidays. The reflective interior gives them a sense of self‑importance, the structure holds heat beautifully, and the ventilation fan (which I also ordered, and which has yet to summon the boys and girls in blue to my doorstep) keeps everything fresh and well‑circulated.Should law enforcement ever appear, I shall greet them cheerfully, offer them a tomato plant, and invite them to admire the seedlings thriving under LED lights like tiny Victorian children at a seaside resort.In short: an excellent tent, a fine horticultural ally, and proof that not every grower is cultivating a lifestyle that requires legal counsel.

Decent. Zips are reasonably sealed. Poles and corners are metal. Much better quality than BudBox Lite (which are terrible with zero customer service.).It has that stupid pouch on the outside which is a total waste of material and merely get in the way. Otherwise it is well designed and made.Little area on outside to attach the Vivosun controller is a nice touch but I can't speak to how well that works. I went with AC Infinity and then Mars Hydro for my controllers. The latter of which is terrible.(NB Mars Hydro are contactable for support and are working through my issues with complexity and incompatibility of their various components. An objective fact regardless if they provide a fix or not).Currently I'm moderately impressed with Vivosun. And enamoured with AC Infinity.

Decent sized tent for your growing needs - the 2ft x 2ft tent I initially bought proved to be too small. Learn from my mistake! This is a well made tent and has the usual vents required for ventilation and power cord access. The materials are all durable and the heavy duty zips fit for purpose. Happy growing.

Very happy with the grow tent. Using it to house resin printer and it works well.

Great little tent. Check your measurements, this is pretty small.

Bought this to house my Yoocaa hydroponics setup. This is my first attempt with this hobby, so thought I'd go the whole hog & house it properly.You start off by building the surprisingly sturdy frame (5 minutes) then just open out the cover & fit the frame inside (5 minutes) & that's it.Very good quality material is used throughout, there's an adjustable ventilation hatch and an opening for the power cord at the back & heavy duty zips on the front to open it up to access your hydro setup. Easily big enough for a 12 pod system & enough height to allow the lighting rig to be raised to its full extent.Given the fact it is effectively a sealed environment, it keeps the temperature constant and the silvered lining concentrates the lighting - also, the footprint is big enough for a couple of additional small seed trays to go inside to benefit from the hydro setup's lighting as well.For the price (just on £30 at the time of writing) I think this is a no-brainer if you've invested in one of these setups.

Devo dire che, dopo un’attesa snervante di oltre un mese ( me lo aspettavo essendo un prodotto d’importazione - USA ), sono estremamente soddisfatto dell’acquisto. Materiali eccellenti e facile da montare. In Italia, ma anche negli altri paesi europei, è introvabile, a parte Amazon ovviamente e che ringrazio per averla messa a disposizione per l’acquisto. Quella precedente, una Secret Jardin, era fatta di un materiale talmente sottile che dopo 5/6 mesi circa di utilizzo si era già bucata in vari punti sulla porta, eppure non è economica! In questa nuova Vivosun P426 ( 60x120x180 ) troviamo un primo strato esterno di tessuto nylon Oxford 2000D ( introvabile nelle grow tents di brands europei ), un secondo strato intermedio a prova di luce in PE 420G e uno strato interno riflettente in Mylar. La struttura è in metallo, compresi gli angoli, con pali da 22 mm. Quelli della precedente erano da 16 mm. Include inoltre il kit per alti CFM, utile per non far restringere verso l’interno la tenda a causa della pressione negativa che l’estrattore può generare. Per concludere possiamo aggiungere i 3 pali per il soffitto ( le altre ne hanno due ), la finestra d’osservazione e una comodissima fessura frontale per far passare i cavi oltre a 5 aperture su tutti i lati e due finestre laterali con zanzariera. Direi che la posso consigliare.

so far so great ,easy to clean seam to keep everything fine and no mold it does what it should and it was fairly easy to put together nothing broke , but the little green frame inside could be a problem for some, but once inside the tent its fine, on of my cats liked the top at first, it did not break or damage still good and cat stopped going, zipper seams good they work well, with it I can have my herb garden right in my living room without any disturbance from light or anything, plus it seam to keep fly or other undesirable critters out.

Muy completo, fácil de montar y de mantener. El forro de aluminio está perfectamente cosido al forro exterior y lo hace bastante robusto. Que se puedan sacar las vigas centrales es un puntazo porque si tienes que mover el foco o cambiar cualquier cable, no es necesario desmontarlo todo. Tiene varias ventanas y salidas con cierres ajustables. En general es un buen armario.

excelente

I’m really impressed with this VIVOSUN small grow tent! The size is perfect for my indoor hydroponic system, and it fits nicely in a corner without taking up too much space. The material feels durable and well-made, and the zippers are smooth and sturdy.The reflective interior really helps maximize light efficiency, and setup was straightforward. I’ve already started growing a few plants, and they seem happy and healthy in it. A great solution for anyone looking to start indoor gardening or hydroponics on a small scale!