Tile Repair Kit, Ceramic Tile Chips & Cracks Repair Kit(Color Match), Porcelain Tile Repair Kit with Super Strong Adhesion, Fix Chips, Cracks and Holes on Ceramic Tile, Porcelain, Acrylic, Fiberglas

This is fairly easy to mix and use. Clean the surface, mix the "A" with the "B" and add color. The color took some experimentation since the color guide isn't very helpful beyond some basic guidance, but I got it perfect and the cracks in my tile aren't visible anymore.

We replaced the framed glass walls on our shower with clear frameless glass walls. Removal of the frame left mounting holes and a cut-out notch in the half wall. Glass installers plugged the holes and notch but the grout used was not a good enough match for us. Too obvious of a repair. We searched a bit and found this tile repair kit. It is a good product and was an excellent choice. Kit could use additional sanding pads and color bottles were only filled half way at best. Still gave it a 5-star rating because of the excellent results. Reference attached photos. I’m pretty confident even better results could be obtained with a little more practice and experimentation, but the repair is not really visible in normal observation. It was fairly easy to do, requiring only drops of coloring and a fingernail amount of the part A & B paste.

Had some 1970’s bathroom tile that had some chips and gouges. Bought this product in hopes of trying to fill those gouges and blend enough to be less noticeable. Followed directions, product mixed well, applied fairly easily. However I had trouble achieving a close enough color match.

This actually messed up the tiles more. The filler was hard to scrape off and left opaque white on the tiles I tried to lightly sand off and ended up taking some of the color off the tiles instead. The color match didn’t blend in and looked worse on the white patch. Would not recommend. Now I have to figure out a way to fix this and it’s more of a problem now. I wouldn’t recommend this product at all.

We mixed the color with the glue to match our kitchen and dining room floor tile and repaired several 1/4" to 1/2" diameter chips on quite a few pieces of 25-year old ceramic tile avoiding several thousand dollars to re-do the flooring. We marked off the repaired areas and let the patched tile cure for 24 hours. We were amazed that the old tile looked like nearly like a new floor again. Unless you know where to look closely you or happen to catch a patch at the right lighting and angle you don't even see the patches whereas before the ugly rust colored clay chips in the light colored tile were the first thing you noticed when you entered the rooms. Great product! A month after repairs the patches are still not un-noticed and have held up fine. Very durable even under from the the dining room chair legs.

A newly installed tile showed a very large damaged area after once in place. With this product I was able to mix the matching color and fill a large hole. You cannot see it unless it is pointed out.

I bough this twice already and about to order 1 more, because the 1st time the white paint was almost dry, waaaay too thick, second order has only 5 drops of white and I’m trying to match a light gray color, so not enough white …I wish I could just order white or at least full little bottles

This is a great product!! We had 3 kitchen tiles that had cracks in them and it drove me nuts every time I saw them. Our tiles are like a marble with whites, greys and tans in the pattern. I mixed this stuff and applied along the cracks. Wiped it with a cloth and let it dry. I didn't need to paint it. It looks fantastic! I can't even tell where the cracks were!! Finally a product that exceeded my expectations!

يعمل جيدا

No good

Worked great, matched perfectly with my tiles. You can't even see the chips that were in my tiles. Worth every penny.

Repair a chipped sink. Repair unnoticeable.

using paint after the glue has dried is nonsense. The colors provided are not water resistant if wiped with a damp cloth. The best way is to mix the color with both parts of the glue at the beginning of the process in order to obtain the desired color taking into account the color of the mixed glue. This way the color and glue dry at the same time. Once everything has dried after 24 hours, the color will not come off if you wipe it with a wet cloth