Spigen Rugged Armor | OnePlus Nord2 5G Case [Air Cushion Protection] [Flexible] OnePlus Nord2 5G Back Cover | TPU - Matte Black

I have used almost all popular OP3 cases available in the market. This is by far the best one I have used. I used the official Black Apricot case which looks the best on OP3. But not protective. I used the Foso Sandstone finish Back cover which again looks and feels good but doesnt protect well. I have used the Orzly Crystal clear case which again looks good as it shows the phone's design but doesnt feel that good in hand. It is protective but not as much as this SPIGEN cover. I have then used Nilkin Hard cover and it looked and felt the best in hand and on the phone but was one of the worst built covers ever used for any phone as it was so tight and hard that it hurt my fingers to put my phone inside and then to remove it and it scratced my OP3 very badly while removing it even when i removed it with full caution. Spigen arrived at last today. And I'm 100% confident that i wont buy any other cover after this now. This is it. This is what i needed. Looks Good, protects great and feels awesome in hand. All in all its a superb package which you cannot afford to miss if you own a OP3. I WOULD SUGGEST NOT TO GO FOR ANY OTHER CASE. SPEND SOME ADDITIONAL BUCKS IF YOU HAVE TO FOR THIS CASE BUT YOU WILL GET THE VERY BEST FROM THE MOBILE COVER INDUSTRY. Only problem i had is that i did not get the SPIGEN authenticity card inside the box with the case which is supposed to be in every genuine product of Spigen. I would have loved to have the Authenticity certificate or card with the cover. So about the cover: It is slim. Doesnt make the phone bulky. Still protects the phone considerably well. Feels great in hand. Looks good. Priced quite reasonably at 700 when ordered before launch. Protects the camera bump by a very good margin. Has raised lips kn the front to protect the screen from scratches if kept screen down on table or will even protect from falls. DONT THINK TWICE. YOU WONT REGRET THE PURCHASE. SPEAKING FROM MY VAST EXPERIENCE WITH OTHER COVERS.

This is hands down, the best case that you could get for your OnePlus 3. To begin with, the build quality is amazing. The case is extremely flexible, has a premium feel and is cut out with laser precision. Secondly, the fit is perfect, it just couldn't get any better! Third, the protection is spot on! The case features a bump for the camera lens(1), a +/_ 2mm bump to protect the display when it's laid flat(2), an "Air Cushioning" feature that features an internal gap in the corners between the device and case, it protects the device by acting as a buffer in case of a fall. Thus, minimising damage(3). Also, the volume control and power buttons are as tactile as they come; there's a cutout for the mic above the camera lens, one for the notification slider and one each for the charging port, speaker grill and headphone jack; all extremely precise and without any hassle to use. And the cherry on top, the carbon fibre texture finish and matte black base, add an oomph factor to the device. All in all, a must buy! On a scale of 1 to 10, Build Quality: 9 Protection: 9 Look: 9

Initially I bought a cheap transparent cover, 100 rupees to be precise, and I thought about flaunting my new phone's amazing looks. But trust me, no one would care if you drop the phone or damage it while showing off. Plus transparent covers get dirty and turn pale yellow over time. So after a long and thoughful contemplation, I finally decided to order it as I had seen positive reviews. I must say , It's a wonderful cover. I would recommend to oneplus 3 users to buy this immediately as it provides necessary protection our phone deserves. Pros: 1. Looks much better than the photo. Has a matte finish and carbon fibers are glossy which surely enhances the overall look of the phone 2. Best protection for the camera bump. Before buying this cover , I used to avoid keeping my phone on hard surfaces such as table etc. I always kept it on the bed or something soft . But now I dont have to worry about it. 3.Excellent tactile buttons. 4.Easy to clean and wash. Its black in colour so it doesnt look dirty. 5.Extremely slim. Adds a bit of weight to the phone but I suppose its good because you actually feel that you are holding something sturdy. Cons: 1.Price is steep. But you get what you pay for. And I think this is the best cover in this price range. Its durable and would last long which would eliminate the process of changing covers regularly. 2. The matte finish is sort of slippery but one can get used to it. Dont hesitate to shell out 800 bucks as its going to be an one time investment.

When you are buying cover you are not buying cover just because you want your smartphone to get less scratches but also to prevent it from breaking during accidents. After buying the cover it was pretty great it was resisting scratch and also dent and from some small accidental falls. But today that changed, I had actually met with an accident and my smartphone got pretty much smashed on a hard surface (the concrete part of a footpath) and also it fell at an angle (right bottom corner of the screen) and before even picking up the smartphone I thought that the screen is surely gone, but to my amaze not one the cover has pretty much absorbed the force but it also prevented any damage to the screen which is amazing, the screen protector got smashed pretty bad because it was a pretty cheap one actually. I mean for a cover to work like this is the testiment that it really works beyond belief. I mean what more can I hope for from a cover, this ₹1000 cover has saved me ₹13000 cost in screen repair. Amazing, Unbelievable And Extremely Worth it.

Best product ever, spigen never ceases to amaze me. The things we worry about before we buy a phone case are 1)Protection: It is the best in it's class, heard it is used for sport purposes and can easily survive drops 2)Durability: This is spigen we are talking about so the durability is unparalleled shouldn't worry about it. 3)Handling: Matte finish gives you good grip to hold and it is flexible as well so easy to wear and easy to remove. 4)Openings: It gives us sufficient room to fit 3.5mm audiojack without any worries and speakers are protected as well.Earlier my concern was that will it manage to cover the camera bump against hard surfaces when placed on it's back. but after using it, it really does. 5)Buttons:volume buttons are tactically placed with bumps, so very handy to use and also power button and alert slider are given sufficent room 6)Looks: One thing i can is that case provides us with rich and classy look so spigen always brings good stuff in the market. ONLY CON which i find here is the product is bit over priced, but other than that it is the best protection you can give to your One plus 3.

I have used this from last 3 years and after 3 years its volume key gets torn, super tuff quality and best

Good but it fades

I bought my oneplus 3T on holi and i was looking for case in the market. My primary requirement was protection and then looks. I initially checked out the oneplus cases but they didn't offer much drop protection. I then started looking for 3rd party cases and spigen was the brand i was familiar with. I had used it for my nexus 5 and i was satisfied with its build. Now lets come to the case. 1. Material has sort of a rubbery feeling to it. It feels nice in the hand and if u look it in the sun and then sort of shines like the Sandstone variant of the oneplus cover. 2. The cut outs are really good and all the buttons are extremely tactile. Thr is ample amount of space for the left side notification button. 3. The carbon fibre on the back is actually plastic and it just looks like carbon fibre. I personally think spigen shouldn't have used this part as it feels cheap. 4. This cover doesn't become sweaty after usage which is a plus for me. 5. It goes very well with the gunmetal oneplus 3T and the lip in the front is nice. Also it won't ruin your screen guard that came pre applied on the oneplus 3T. I would highly recommend u to go for it. Thr is only spigen and tudia that are available on Amazon that are well known brands. Rest is junk i guess. U will be totally satisfied with this case. Thanks

I've been using Spigen for quite a few years now, I've had them on every phone I've had. Being a phone reviewer I can safely say Spigen is my Go-To. The Rugged Armor is by far my favorite lineup of case from Spigen, I have it on my Google Pixel, iPhone 7 and now OnePlus 5. They're thin but still offer a solid protection. The TPU doesn't warp like OtterBox or competing case materials. The cut-outs are perfect and the buttom covers feel tactile and stick out the perfect distance to differentiate them from the side of the case. They also age very well and done scratch and fade the same way as most cases either. The black is sleek and the carbon fibre effect looks great. A no brainer for your OnePlus 5.

Excelente case calidad - precio

To be honest I was expecting some sh I ty stuff but what I received definitely surprised me, this is ridiculously good, good enough that I'm thinking to get more for my other devices, will definitely recommend this, you won't regret it :)

I ordered 5 cases for the Oneplus 7T as I'm an annoying perfectionist and wanted one that was "just right". You might have different needs to me, but hopefully this helps you choose. I was looking for a case that was as slim as possible, high quality, able to stick a metal plate between phone and case to work with a magnetic car holder, protection for the phone less important. Here's what I found: Spigen Liquid Air & Rugged Armour : Fab quality both of them. Liquid Air about 1mm thinner on the sides compared to the Rugged Armour. Very nice to touch but both a little too slippery for me. Both felt equally protective. Only tried the liquid air with the metal plate (MPOW Metal plate) and it worked fine. iBetter : It's ok. Not as high quality as the Spigen or the Nillkin. Thin, but doesn't hug the phone quite as much as the Nillkin or Spigens. Nalia Case with finger ring on back: Nice idea and quite slim, but quality not as good as Spigen or Nillkin Nillkin Frosted Shield Case : The winner! The plastic is harder than the Spigens, but bendy enough to easily fit the case on the phone. It fits like a glove and the grip is the best of the five, AND it is also the slimmest. In the hand off the phone, it feels less substantial than the Spigen, but once on the phone it feels really good in the hand. Protection is probably not as good as spigen because it is thinner and harder than the Spigen but thats ok with me.

I've had used spigen cases before for my iPhone 5 and was always impressed with their designs and quality. When I purchased my oneplus 3, I searched Amazon for cases that I could possibly pair with the phone. Unfortunately, none of the cases that were available really drew me in. A few days later, I saw that the spigen case was available so I decided to try it out. Right when I got the case out of the box, I was immediately impressed with the feel and quality of the case. You could tell its spigen quality and not some no name brand. Looks The case looks great with two carbon fiber strips on the top and bottom of the back of the case. Spigen logo also on the back. Feel The case has a great feel to it, the back is smooth but not slippery in any sense. The grip feels good and solid when holding the phone. I can hold it without feeling I might drop it any time whe on I didn't have a case on the phone. Figment Case fit great with all the cutouts for the camera, charging port, speakers, headphone jack, and notification switch fitting perfectly. The buttons for the power and volume up and down buttons work flawlessly. It doesn't even feel like there's a case on it, almost like it came straight from the factory. However, my screen protector didn't fit with the case. I changed out the original screen protector to one that provided more protection area, however with the case on, the corners began to slide up and I had to remove the protector. If you're using the original screen protector, you might be able to leave it on as it covers less screen area but ymmv. All in all, I'm loving the case and would recommend it to anyone looking for a case for their oneplus 3.