Baltic Birch Plywood - 1/8 Inch Thickness - 11.8" x 11.8" Wood Sheets for Laser Cutting, CNC Cutting and Crafts (20, 11.8 X 11.8)

Excellent quality, and I LOVE that each piece is individually sealed in plastic, which means I am using wood that is nearly 100% warp-free! I get consistently good cuts too!

Decent quality for the money. Shrink wrapped, so they arrived, clean and flat.

I agree with others that say that the panels have bad spots where your laser will either not go through at all or have a really hard time when laser cutting. I'd say I had bad spots on about half of my sheets. I usually cut out pieces of layered ornaments on here and am able to cutout about 9 per sheet. Of those 9, maybe only 1 or 2 don't cut through all the way in some small areas. I usually just score the back with a knife afterwards so that I can push it out, but it usually ends up in a not-so-clean cut in those areas. Overall, I would still probably come back if I needed these in a pinch, but I would likely jump to the first option I can find that is cheaper since these didn't blow me away.

These are reasonably flat and I like the individual wrapping. I use them for making whirligig prototypes and laser cut earrings. The sizes are consistent as well as the density, so my laser settings never change.

Cut easily on my laser. Have ordered from them multiple times with no issues or warping

High quality pieces. Each piece was individually shrink wrapped, too! Clean, flat and smooth. Quality product for the price!

First photos are of the horrid ugliness of this wood. The last two pictures show it compared to the good wood I got from other suppliers. You can probably see how this review is about to go… This has got to be the WORST wood I’ve ever worked with. I hate that I bought it but it’s too late to do anything about to it now. I’ve wasted literal hours trying to get this mess to work to no avail. I even changed my settings on my laser AND adjusted my scroll saw thinking maybe I messed something up but absolutely not. My other batches of wood sheets from other much more reliable suppliers came out flawlessly once I realized it couldn’t have been user error. And sure enough, the wood from other suppliers was beautiful. Shown in the photos, you can see how horrible the quality is. The “wood” peels no matter what and leaves this weird ugly orange color if I try to sand it. The “wood” breaks apart when I try to make a cut and ends up pulling the edges off which in turn makes the back of whatever I cut, tear away when I try to move it. And don’t even get me started on the char and attempting to clean it. Every swipe I made just made it worse, as you can see. I added photos of my amazing wood I purchased from other places like Craft Closet and Smokey Hill Designs so you can see the difference between the two cuts. You can even see that the wood from this vendor is not even the same color. It’s more gray than anything and that gray comes right off the moment you sand or cut it. THEN to top things off, it’s not even the correct thickness. It isn’t worth the money or time it took to try to work with this. The only good thing about this mess is the fact they individually wrapped each sheet, which really didn’t matter since it sucks anyway!

I ordered the 8-pack of "3MM(±5%) thickness, each measuring 12x12 inches". I knew from the photos that they were really 300mm on a side, which is just under 12" and I'm OK with that. But the "3MM(±5%) thickness" and the image showing a caliper measurement of 2.96mm is TOTALLY wrong. Yes, they are very nice boards as far as surface finish goes. Six of them are perfectly clear on both sides, one has a minor black blemish on one side, and one has some dark areas and splits in the top veneer. See photos. Also, each board is individually wrapped in plastic to keep them clean until used, which is a nice touch and appreciated. My complaint is the thickness. They are advertised as 3MM ±5%, which would be 2.85 to 3.15mm. As received there is a label on the bundle that says they are "2.7 - 3mm", so right there you know you're getting short-changed on thickness. But wait...there's more! The stack of 8 boards, including the plastic film on each board, measured 22.32mm, which means the average thickness is 2.79mm, again, less than the advertised thickness. After removing the film, the actual board measures 2.60mm thick, not even meeting the labeled minimum thickness and far from the 2.85 minimum that was claimed when I purchased them. I will find a use for them because the surface finish is so nice. But even at 3mm I wasn't sure they would be thick enough for my project, and now that I find they are over 13% thinner, I'll have to look for another supplier.

Perfect for hobby crafts.Strong Great price for 8 sheets Well packaged