Kreg Adaptive Cutting System Plunge Saw - Plunge Circular Saw - Cuts Solid Wood & Plywood - Adjustable Track Saw - Carpentry Tools & Accessories - ACS-SAWBB

I recently retook an old hobby with woodworking, and this Kreg saw along with its companion multi functional table were the first things I purchased. This saw has plenty of power to cut through 3/4” panel (thickest I’ve cut so far). It is important to keep in mind that when doing crosscuts, the wood can easily chip or split… my recommendation is to use painter’s tape and draw a cut line on top of the tape to guide you and to prevent the wood from splitting. The splinter guard helps, but is not 100% effective, so you still get some splinters, hence my recommendation earlier. The dust port is very effective especially if you attach a vacuum. Through the last couple of months I’ve been using this saw, I estimate an 80 - 90% dust capture by attaching a vacuum. For anyone starting out, this means there’s less fine dust particles in the air, which reduces the risk of breathing those into your lungs (which can lead over time to breathing issues). Other things I like are how well the saw works with the Kreg track, you can easily adjust the saw with the guide to virtually eliminate any play, thus allowing you to make very precise cuts. Setting the plunge depth is easy, and the saw’s handle allows for push or pull, so if you’re like me (5’ 10”) or shorter, you can start your cut on one side, pause and go around to finish the cut without leaving marks. Hope this helps

This is an awesome saw. I can't believe I waited so long to order it. As Kreg claims, this saw cuts a perfectly straight line, as close to a factory edge as can be. The dust bag collects most of the saw dust, and it does fill quickly. The adjustable chip guard works very, very well. The saw allowed me to install all new solid oak stair treads and pine risers on a 1910 stair case. I was able to cut perfect 4 degree bevels to help ease the treads into place for a nice tight fit. I used a 5 degree bevel on the back of each tread to accept any extra adhesive, and keep it from oozing out of the joints. Best purchase I have made in some time. If I never use it again, the Kreg Plunge Saw saved me over $1,000 in installation costs. Great manufacturer,and great product.

It works well and makes very clean cuts. Only complaint is that the dust control did not work well as shipped. I added an aftermarket cap to cover the arbor hole, and it works much better.

Great tool. Good Quality. The right tool for cutting wood.

Great saw with the track. If you do long cuts on doors or other trim pieces it is a great tool to have. A little pricey but the end results are great. Would definitely buy again

This works great with the tracks. Been a game changer.

I am very happy with this saw at a dramatically cheaper price then a Festool. It cuts very nicely and has no problem cutting 2 inch thick walnut or bubinga. Cuts are very nice with the included blade and with the sliding channel you get very accurate cuts. I covered the blade access with tape to improve the dust collection. With the blade access covered you get very good dust control when attached to a separate vacuum. I had no problem attaching the hose from my shop vacuum, it fit right into the port that came with the saw. However, the fit will depend on the vacuum you have so it is possible you may need to buy an adapter.

Is a good tool that works as it should.

Amazing Saw! I’ve been wanting this for a quite a long time, with the track system it makes ripping easy!