DISCOVERYOPT 7075 Precision Scope Rings, 1" 30mm 34mm Pre-lapped, Picatinny | CNC machined 7075 aluminum. Pre-lapped bore and recoil lugs ensure precise alignment and max stability for heavy-duty use.

Bought the 1 inch Low profile Rings to go with a 42mm objective lens Vortex Diamondback.This is sitting on a Savage bolt action rifle that has a picatinny/weaver rail on it. Perfect fit with a little room to spare!!!These rings are so nice and so thoughtfully built I want to replace most of my existing rings with these!!!The quality is fantastic!The screws are the same for the ring caps as they are for the base clamps so you don't need 2 different screw driver heads to fasten them, AND you get 2 extra screws in case you lose any!They also put the inch/bound markings for the screws so you know how much pressure to apply with the torque screw driver! The ring caps state 20 in/lbs but my scope instructions said to not exceed 18 so I went with the scope max vs the ring max so keep this in mind when putting your scope on.The index pins and the screw numbering for fastening was another nice touch with the labeling that make these a dream to easily secure in place without lopsided scope ring tops existing.Now on to the best info, per the title of this review.These are LOW rings for a 1inch scope tube sitting on a 20moa picatinny rail on my Savage bolt action rifle.In the picture there is roughly a 1/8th inch clearance between the end of the rail and the scope as the scope widens to the 42mm object lens size.I can't see how proper placement on the rail would ever have have the widest part of the 42mm scope lens positioned over the rail, but if it did I think there would still be a tiny bit of clearance available (1/8th inch or 3.175mm).If you have a 44-45mm objective lens scope, I think you would still clear the rail if placed about like my setup is but it would be a slim cap and it would depend on your eye relief affecting how far back you have to position your scope.I mean c'mon the whole point of having rails on these bolt actions is so you can adjust a scope forwards or backwards to get the perfect eye relief so you pick up the rifle and are right in the scope on target without having to move your head/eye backwards or forwards to get the sight picture right.As you can also see in the picture there is plenty of clearance before getting to the barrel.If you are savvy and capable of doing a some small time but accurate metal cutting, you can get away with cutting the last notch off the rail to buy some more space for a 45mm+ objective lens scope and using these low rings.I don't have any decent tooling to make such a cut look right and be square but if I absolutely had to I could but the rail with a hacksaw or a dremel and a metal cutting wheel and file the edges smooth.I prefer not to do such a thing though and have no need because I like to stay with 40-45mm objective lens scopes. I don't do any long range hunting beyond a 225-250yd shot so no need for those big 50mm+ objective lens scopes with more magnification than 16 power.More useful info.The bolt easily clears the scope with no issue. My bolt handle is oversized so if I need more room I can easily work it underhanded versus having to wrap my thumb and index finger around it to work it but a thumb and index finger grip should work as well for a Savage with a rail and these rings.I think some other reviews of another brand of rifle had issues clearing the rings, but I also don't think they put a rail on their bolt action rife, and the rail gives so much more room in general.To me all rifles need a rail to ensure you can place a scope on them to get the proper eye relief. Why spend all that money on a rifle and a scope to not be able to easily see through it. Especially if you are trying to put meat on the table and are wanting to do right by the animal. Getting a rail makes life easy whether you are big, small, young, or old.For context, I have and use some well known, great quality, rock solid, 1 piece mounts/rings like the Burris PEPR, Leupold, Lucid, and others. So I have a little experience with good quality rings/mounts.For individual rings I mostly go with the humble and adequate $20-$27 UTG/Leapers and they do fine, but these DISCOVERYOPT rings blow the UTG ones away! There is no contest and the price point is just right for the amazing quality and features of these DISCOVERYOPT rings.From now on when I upgrade scopes using individual rings, I am going to also upgrade to these rings unless for some good reason I need to move to a steel ring, but there are no >real< reasons I currently know of.I like to ensure my rifles are working with reliable entry level scopes before I upgrade the scope to a better scope. No matter if it's a lesser but humble upgrade to a Vortex Diamondback or an upgrade to a whopping Leupold Mark 5. I think these rings will become part of that upgrade as well. I hope this rambling bit of info helps someone out there.

This review is based off my initial observations and NOT field testing. With that said, I have been into firearms since I was 8 years old and my use of firearms and builds is fairly extensive. I have multiple optics ranging from cheap to THOUSANDS of dollars in price. I have used everything from cheap scope mounts to mounts costing $350! These mounts appear to be made VERY WELL. I have NOT used them under field conditions, but from my initial observation these are made VERY WELL and I am hopeful they will work PERFECTLY!!! EXCELLENT packaging. They give you the tool needed to install with 2 extra screws and the INCH POUNDS required to torque them right on the mounts themselves. GENIUS!!! The ALUMINUM used is also AWESOME!!! Aluminum 7075 is one of the highest strength aluminum alloys available. Its strength-to-weight ratio is excellent. It is ideally suited for highly stressed aircraft parts. If they were labelled Vortex or Nightforce, the price would be so much HIGHER!!! So impressed I just bought a second set!!!

I picked up these 34mm scope rings expecting decent quality for the price, but I was genuinely impressed when they arrived. Right out of the box, the machining stood out. The edges were clean, the finish was consistent, and the overall machine work looked far better than what I expected at this price point.Being a bit particular about mounting optics, I decided to check the tolerances before installing them. Using both an inside and outside micrometer, I measured the ring diameter and the clamping surfaces. To my surprise, the measurements were spot on. The inside diameter was right where it should be for a 34mm tube, and both rings matched extremely well, which tells me the machining and quality control were taken seriously.During installation everything lined up perfectly. The halves seated evenly, the hardware tightened smoothly, and the scope settled in without any binding or uneven pressure. It’s always reassuring when parts fit the way they’re supposed to without needing to fight them.

Probably the BEST scope rings on the market offering very good quality and value! Have many sets and they are every bit as good as the $150-300 range scope rings so save yourself some money and buy more "canned goods and ammo!"🎯💯Buy with Confidence!Discovery Optics Scopes are excellent as well as the glass is amazingly clear, great tracking, a wee bit heavy, and a great value for the 5x25 and 6x36 scopes. Perfect for LR and PRS applications as well as "controlled" hunting use!

Man these rings are awesome. I have a set of area 419 match rings that cost way more than these rings and the discovery rings ain't too far off. I think they did a great job with these and they held zero perfectly fine. However, I do hate discovery's styling, comes off a bit tacky to me. These rings function fantastic, but I do still prefer the area 419 rings due to ascetics. But if you're on a budget, these are great.

These are a very nice quality ring, as good as ring's cost twice as much, saw a review that stated the scope moved in the ring's not sure how that could happen unless they weren't installed correct, many people over tighten scope rings and don't use a torque wrench, that will start to crush the thin alum scope tube which then will let the scope move, at 20 inch lbs these ring's have no problem keeping a scope secure on a .300 ULTRA MAG which has shoulder hurting recoil, have at least 250 rounds though that rifle and the zero has never shifted

I will definitely buy again. These are very well made and machined for alignment. There are no grip pads like most rings, so I was at first concerned, but the scope is not going anywhere even well below torque specs. The rings are so concentric and sized well, that the scope tube fit with zero play. I a few clicks of windage adjustment at the range and the windage didn't change from 50yd to 300yd. Elevation required adjustment for scope to barrel spacing like any scope. After 100rds with my 30-06, nothing has moved.

Got the Discovery Optics 7075 rings in 30mm. Used this on HT 6-24x44 scope and fit it perfectly. Would highly recommend, looks and feels high quality and been holding my scope and zero on my 6.5 Creedmoor and 308. The rings are pre-lapped which is supposed to help hold the scope better. Very convenient to have the torque values on the rings themselves. The rings are labels so each rings has the same top.