SnapLock GarageDeck 12"x12" Interlocking Garage Floor Tiles, 48pk, Graphite

I looked into having an epoxy/polyurea treatment on my garage floor, about 450sf. The costs were all above $3,000. I investigated this product and installed if for under $1,300. These are very solid tiles and well made. They snap together and, be warned, once snapped together on the floor, will not come back up. I bought gray tiles for most of the garage, and for color, installed black ones where we park the car and blue ones where we park the Can Am. I installed them when my wife was away for a few days. The total installation time was about 2.5 days with just me doing the work. My wife was blown away. The video shows how to separate the tiles as they come 4x4. I found that if I placed a single tile (face up) below the interface of the two tiles, that when grabbed the interlocking parts with a plier, I could press down and the one connection would pop open. You then have to do this for each of the four interlocking parts. It goes pretty fast once you get the hang of it. I didn't damage any of the tile. In some cases, I could just install all four tiles at once. I would align them, step down on an edge, and then repeat over each of the interfaces. No need, typically, to get on your knees to install them. I used a 12" chop saw to cut the pieces; it worked great. This floor looks great, is holding up very well, is easy to clean (broom or leaf blower), and isn't cold on your feet when you walk on it; I think it stays cleaner too. It does make a plastic-like sound when you walk on it. Remember to buy the edging for the entrance into the garage.

Very easy to install, just need a mallet to connect the pieces. I used a large flat screwdriver to separate the pieces and it was super fast and efficient. I will be ordering more to cover the left side of my garage. Update: I bought more of these to cover the left side of my garage (covers 2 bays). I was able to remove them pretty easily when making changes. Only once did I have a tile with a damaged loop but it was easy enough to rebend it to ensure a good connection with the other tiles. For a 3 car garage, it would be about $1800 to cover all of it and seems to be a much lower cost point then doing a professionally applied epoxy coating that might have issues later on.

When my house was built, the concrete garage floor was not scored (why??), which left multiple random cracks after a couple years. I considered epoxy, but after watching my neighbor toiling for several days doing the prep work and applying the multiple coats, I questioned if that was the way I wanted to go. I wasn't convinced of the durability of epoxy, so I sought out other options. The GarageDeck tiles fit the bill perfectly. I thoroughly cleaned the floor and patched the cracks. The installation was pretty straight forward, and required little cutting, which I did with a circular saw for the straight edges and a jigsaw for cutting around the garage door tracks. I used black tiles for the boarder and center, and graphite tiles between those. It looks really good and has been everything I wanted for my garage flooring. And the beauty is that if there happens to be any damage along the way, I can snap out the old tile and pop in a new one. It was just about $600 for a one car garage - well worth it. I'm 75 and worked at a very leisurely pace for just a few days (I had a lot of stuff to move around in the garage) to complete the job. I recommend the GarageDeck/RaceDeck products.... great products, good value, easy installation, and really nice looking.

Overall easy to work with, but they come in preassembled 4s and any time you need to work edges or cut pieces, you need to take them apart. Once clipped together, they are extremely hard to get apart. I would lay them face-down on my workbench and use pliers to squeeze each clip, working my way along between the tiles, while sliding my other hand along to separate them. It was hard on my hands as the backsides are so jagged. The good news is, they stay clipped once you put them down. Just line them up and step on each place there is a fastener, and they will snap into place. Looks so clean and nice compared to my old basement floor. I cut the pieces with my 10" tile saw which worked perfectly.

They so easy to snap together or apart. Me and my 8 year old did it. Recommend you wear shoes and just step or jump on them 🤎

Really fantastic and worth the price once you’ve completed your project. I mixed two colors which turned out superb. Installation was methodical, straightforward for sure. Ended up using my table saw to cut the pieces to exact size when needed - table saw made quick work out of these for sure. There are YouTube videos available which I suggest you watch before embarking on installation. I ended up using a classic paint can opener to separate pieces as needed and this particular tool worked amazingly well for that purpose. I installed over a 40 year old spalling garage floor and couldn’t be happier.

Update #2: The seller is trying to make things right. Apparently, the color of the tiles can change over time. Amazon shipped me a mix of older and newer tiles (all ordered on same day) and they did not match. Fingers crossed that the replacement tiles match! Resolving this issue wasn’t easy since the lady who answered the Amazon customer service number was completely unhelpful and when I called Big Floors directly they told me I had to deal with Amazon. I eventually reached a helpful person through a chat with seller via Amazon. UPDATE: I was going to give these 5 stars, but unfortunately when I opened the last box they were a completely different color beige. Neither Amazon or Big Floors seller were willing to resolve the issue without a major inconvenience and added cost on my end. Be warned, there can be major color differences box to box AND they don’t offer a satisfactory solution that guarantees your floor tiles will match! I am pretty happy with these tiles. But, to the other ladies…. Don’t believe the videos that suggest you can easily snap these together with your hands or feet. Get a rubber mallet and a block of wood. A mallet worked great once I figured out the sequence of joining the tabs together, especially for pieces where you are snapping in two sides at once. Start at the middle seam on one side, connect then go to the end of that side. Then work back towards the corner and then do the other side starting at the corner moving out. We are using these tiles on a concrete slab for both a workout room and a workshop. We liked that there gaps underneath that will prevent issues with moisture and mold.. We did use a woven (not solid plastic) landscape fabric underneath to make them quieter to walk on. Overall, a great and easy to install product.

Great product and was easy to install. Only problem was when re ordered this product is less than the 48 feet in a carton the color was different. Also to be noted the tiles are shipped in 4 tiles already together which makes the installation much faster.

I was going to use it to cover my concrete deck under my carport but found it to be too rigid and it did not mold to an uneven section on the deck...I assumed that it was more flexible than that when I ordered. I will need a product that has more rubber for flexibility.