Termitor H1 HID Car Lighting Kits, 150,000LM Ultra Bright, 6500K Cool White H1 Bulbs Kits 1:1 Halogen Mini Size, Long Lifespan, IP68 Waterproof, Plug & Play No Adapter Required for Off Road, Pack of 2

Termitor LED headlight This was a great replacement for a bulb that became unobtainium. The motorcycle is a Honda Rebel, 1986 CX250. Normally, when you replace this headlight bulb, you have to replace the entire reflector and lens as a unit. The bulb is not removable as we normally can with other vehicles. The bulb being replaced is an incandescent motorcycle bulb. The bulb is actually part of the headlight sealed beam body, reflector and glass lens. You cannot remove the bulb by normal means. My oem bulb was never replaced and as some incandescent bulbs will do, the light was beginning to get dimmer when turned on. It was getting difficult to see the road at night and I was concerned that the headlight would burn out and I would lose the only light I had to see the road while riding at night. To install a replacement bulb, you have to cut out the OEM bulb that is unobtainium, (There are vids on yTube showing how to do this), then size the hole to accept this bulb. Test liven to align the bulb to level in the reflector then glue in place to seal the bulb to the reflector. Yes, its a bit of work but if you want to go LED, this is what you need to do on this type of sealed beam. Your only other option is to replace the entire sealed beam with an odd looking LED sealed LD or replace the entire headlight unit including the bezel and metal body. THe problem with all of this is it won't look OEM anymore and is rather expensive. Modifying the OEM sealed unit keeps the OEM look and you get better lighting from this bulb. ONE WARNING - - Some LED bulbs have a forward projection lens. This won't work. The glass lens of the sealed beam scatters the light and any light benefit is lost. Ask me how I know... THE BULB The bulb is low watts. This bulb has a tiny fan in the blub base (inside the sealed body), Some bikes have limited power for lighting and accessories, the power regulator is not sized for anything other than what was OEM. THis bulb is in the power range of the old OEM bulb.... perfect. The light is bright white, lo beam washes the road ahead of you, high beam is brighter, lights the road further ahead of you with a strong beam. One note, on my motorcycle, the hi and low beam terminals are switched opposite of the OEM connection, bright is lo beam and vice versa. So you can change out the lighting plug so it corresponds with the bright light switch. Because this was a slightly complicated install, the beam from the reflector is more or less set, that is, you can't do much adjustment to what you get beaming on the road. The LED's are close enough position to the OEM incandescent bulb filament, that you get a close light beam similar to the bulb you are replacing. This bulb body fits inside the sealed beam and the base can be sealed on the reflector body. The sealed beam will fit inside the headlight body normally, it all fits. I HIGHLY RECOMEND this bulb. It took a lot of time to finally find the right bulb that worked for this motorcycle. If you have a 1986 Honda Rebel, or have a headlight with a similar sealed beam bulb, and you dont mind doing a little work to save some money, then this will do the job. Entire job to install this bulb takes about 1 to 2 hours. If you are less handy than I am, figure 6 hours. This modification absolutely works and you get an almost perfect OEM light from your bulb reflector when completed. I do not know the seller, nor did I receive any money or product for my random review. 250813 1555

Put these in my motorcycle and wow—what a difference. The stock bulbs were weak and made night riding sketchy, but these LEDs completely changed the game. Super bright, crisp white light that really cuts through the dark and lights up the road ahead. Installation was straightforward, plug-and-play, no flickering or weird fit issues. I noticed right away how much safer it feels—cars actually see me now, and I can see every little detail on the road. The beam pattern is sharp without blinding oncoming traffic, which is exactly what I wanted. The build quality looks solid, with a nice metal housing that feels durable, not cheap plastic. Been riding with them for a bit now and they run cool, no overheating, and no problems even on longer rides. For the price, you honestly can’t beat the performance. If you want a serious upgrade for your bike, this is it. Highly recommend—worth every penny

These LED light bulbs are a great replacement for my Kawasaki Vulcan S factory halogen headlights. The H4 bulbs fit perfectly in my bike with no hassle and are much brighter than the original factory bulbs. They do not flicker and both the low and high beams are aligned very nicely. I can’t speak to their longevity as I just installed one on my bike. These are in fact better and brighter than another brand of LED light bulbs that I had on the bike and did not last very long. These are also better aligned. I do recommend these. So far so good.

Very visable very bright quality is good fits pretty easy

These H7 bulbs are the best option out of all the other brands I have seen first hand in person. This will always be my go to when I need LED headlights from now on. The installation was super easy as well. They even came with a set of gloves to avoid putting fingerprints and oils all over the new bulbs. I literally hooked these new bulbs in where my old ones were (they fit perfect no adjustments needed), and then I turned them on and Viola!! It was like magic compared to the old halogen bulbs I had been using(it was hard to tell if they were even turned on half the time!), I have bad eye site and needed something brighter for driving at night snd these bulbs really did a perfect job of projecting light so I can see any and everything, including deers(which are everywhere here in west virginia)!! Also in my car the same bulbs was a low and high beam and these do that role perfectly! The high beam setting is unreal, its makes it look day light out side almost (in a good way of course), and by the way! I've yet to ever have anyone flash their brights at me saying they were being blinded!! These are bright but not so stupid bright to wheee other drivers can't see the road.... these really are about as perfect as you can ask for if you need a good set of led headlight bulbs!! I give the product and company 5 stars!! The customer support is great as well and very helpful!! They respond same day and resolve any issues I've ever had (i needed a canbus on my set I got for my Mercedes last year and they helped me solve my issue in no time)!! Buy these if you need a set! You won't be disappointed i assure you!!

These LED bulbs are a night-and-day difference compared to the stock halogen bulbs I had. The 6500K cool white light is much brighter and makes a huge difference in my visibility on dark roads at night. Installation was just as advertised—truly a 3-minute, plug-and-play job that fit perfectly in the factory housing. ​A few things for others to know: ​The brightness: They are very bright, which is great for visibility, but it’s really important to make sure your headlights are aimed correctly after installing them so you aren't blinding other drivers. ​Compatibility: For my vehicle, they were completely plug-and-play with no flickering, but I know some newer vehicles might require a CANbus decoder. ​Off-road use: Be aware that these are labeled "for off-road use only," so check your local regulations before installing them on your primary daily driver. ​If you’re looking to modernize your car's lighting and get a massive boost in visibility, this is a fantastic and easy upgrade.

Nice and bright white light. Not yellow-ish like my original bulbs. I put these in my grand marquis.

Bought 2 of these for my 2015 Ford F150 that has aftermarket projector style headlights. All 4 fit in the low beam and high beam spots just fine. Lighting is MUCH better than the halogens that were previously in them. My only complaint is at idle they slightly flicker, just slightly, but enough to notice. While driving they are bright and consistent. I’m unsure if it’s where my truck idles low at 550 rpm that causes it or if it’s the lights themselves. Overall I’m pleased with the lights and they match the halogen projection pattern pretty well.

ロービームはとても明るいLEDです。ハイビームはややあまり照射力が弱い感じでしたが、普通のバルブではこのくらいが普通なのかも知れません。少しお高めですが、耐久性などはこれから使ってみないと実際には良いか悪いかは判断ができません。

Malo, se calienta muchísimo, no apto para moto Harley ya que en la moto hay un Rubber que cubre el Socket y con el calor se puede llegar a derretir.