MANNKITCHEN Professional Stainless Steel Spatula for Cast Iron (MK21680) | Heavy-Gauge Hardened Stainless Steel Resists Flex; the Precision-Beveled Edge Scrapes, Flips, and Smooths Cast Iron.

I bought this as a gift after a fair amount of reviewing other products - after a couple of months of use, we can give it high marks. My wife was primarily looking for something to use in cooking loose ground meat in cast iron pans, to make it easier to break into small uniform chunks. This excels at that use. It is sturdy and stiff with tapered edges to the blade that make chopping easy. It is exactly the right width to use the longer sides in a frying pan to break up a lot of material quickly, and it is long enough to use efficiently for mixing / folding ingredients together. It is made of heavy non-flexible stainless steel and shows no sign of rust spots (though we always hand wash and dry immediately, like all of our other steel kitchen tools.) To other low-rated concerns: Ours did not have any kind of sticker on the blade (stubborn or otherwise), though I am confident that green Scotch-Brite pads would have made short work of that anyway. They will abrade the steel itself - no sticker or glue would survive. The tang does not extend the full length of the handle, but it is properly engineered. If you're putting enough pressure on it to risk bending it at this point, you're using it wrong - get a different tool. Perhaps related, we do not make "smash burgers", but this does not appear to the right tool for those. It is narrow and thick and stiff, more for chopping than compressing large burgers. I would think you would want something slightly flexible and somewhat wider than the burger. Ours has a handle that is clearly made of high quality (clear grain) hardwood and has a durable water-resistant finish. That said, we never put edged-steel or wood-handled kitchen tools in the dishwasher - wash them by hand! And while the edges of the blade do taper pretty thin to facilitate chopping, they are not what I would call "sharp". If they're too sharp for you, blunt them with sandpaper or sharpening stones. (Or in the other direction, I suppose you could actually put a real edge on them, though I'm not sure how well it would hold up, or how necessary that would be.) This is a high quality tool and I get thanked by my wife every time she uses it. Recommended without hesitation.

I've been using this now for about 4 years after I resurrected my cast iron skillet during the pandemic and started eating in more than wasting money ordering out. This has become one of my favorite kitchen items next to the cast iron skillet itself. Everything you could ever possibly hope to make at home but thought was too difficult/time-consuming/expensive is at your fingertips with this and a good cast iron. It's durable to the point I'm pretty sure it will survive a nuclear blast, it's kept enough of an edge to become my caveman chef's knife to slice potatoes and chicken before and after cooking using the cast iron as the surface, and it's so aesthetically fun to hold you'll feel like you just slaughtered a woolly mammoth and are serving up its well-seasoned remains to your hungry family. I'm honestly shocked I didn't review this years ago so figured I'd throw in my 2 cents and 4 years of me telling everybody I cook for who comes by "GOD I LOVE THIS THING"

This is the katana of spatulas. Seemingly right out of the forge of samurai sword master Masamune, this is as much knife as it is flipper- think Benihana chef, lightening fast shrimp chopping, wrist flipping a sizzling morsel into your sea lion like gaping mouth - THAT kind of kitchen tool. Apparently made from the recycled armor of an M-1 Abrams tank, it’s long and shiny blade has not a millimeter of flex. This thing is stiff, unyielding, unrepentant. It’s right and proud of it. I’m sure the edge will have to be dressed on occasion (leather strop, sharpening stone, cold file) but out of the box it’s well suited for an appendectomy... razor sharp! If you beat this into the seam of your great grandmother Bertha’s cast iron skillet you’re likely to curl the edge... so don’t do that. The corners are thin because they are beveled both lengthwise and widthwise. They are the weak spot on the blade but the design provides tooled edging for slicing and chopping. Worth it! On my flat griddle it sails across the surface like Dorthy Hamill in Innsbruck in 1976. It glides effortlessly under egg and meat and veggie. Driving this baby takes some practice and you are very likely to oversteer at first. Take a few practice laps then give it the gas and enjoy the pleasure of it’s neck snapping acceleration and amazing cornering.

This thing is awesome. Super sturdy. Makes fantastic smash burgers and flipping is a breeze. Definitely an upgrade over box store specials. Highly recommend. Does the job, and dishwasher safe!

Our household has transitioned to using mostly cast iron cookware and we struggled with our traditional tools, especially with stuck on food during cooking. We knew we needed to upgrade to something strong (won't bend) and durable (won't fall apart). With a lot of options out there, we decided to invest in this relatively inexpensive stainless steel flipper/scraper/spatula. That moment was back in August of 2020, but I remember getting it out of the box and being a little concerned about the rough edges of the metal. Not a good sign if the machining is rough, but we are a resourceful family and I cleaned up the edges over time with a metal file. Now, so many years later this tool is our go-to for cooking with our cast iron skillets. We love it so much that we are sad when it's in the dirty dishes. I came back to this review because we are going to buy another one to have in our rotation. Hopefully they have worked out some of the machining issues, as well as any of the poor reviews on the handle (our handle has been fine, even after going through the dishwasher regularly for years). I would give this 5 stars except that those machining issues could come back to bite some people. Not everyone is as resourceful as we are. I highly recommend otherwise. (Pictured is the flipper in its current state, the rough edges that I left as they were, and the scraping edge holding up nicely after regular use for years)

See that cook in the diner, standing in front of the flat-top flipping burgers or hot cakes or even fried eggs. They're using a Mannkitchen steel spatula. Because this is a kitchen utensil proven on the job by professionals. Do you like smash burgers? You need one of these, or things will not go well. Seriously, this spatula is a kitchen necessity. I don't have a flat-top, but I have cast iron pans, and this is great with them. It's heavy duty for smashing, sharp edged for getting all that wonderful Maillard reaction crust with minimum sticking and shaped perfectly for most efficient use. Don't just take my word for it. Serious Eats recommends this spatula, too.

OK, this is an excellent stainless steel spatula. Yes, you can press a hamburger with it without the blade looking back at you and saying "you can't be serious". Yes, you can be serious. In fact, the blade is so heavy it will cause the spatula to sit up straight with the bottom of the spatula flat on the surface by it's own weight. That's a good thing. Earlier reviews seem to have issues with some dang fool sticker. Well, they seem to have corrected that. Sticker was stuck on a plastic sheath bag instead. Works for me. Now for the problems. In all honesty, there isn't any. Save for one issue. This piece is grotesquely over priced. Here's why. Nowhere on the spatula nor on this website does it tell you that this spatula is "Made in China". It tells you so only in one place and that's on one of the stickers on the plastic bag sheath it came in for shipping purposes. There is absolutely no excuse to have this product made in China instead of right here in the good ole U.S.A. None, nada, zilch, zero, excuse. Moreover, better quality, cheaper cost, and employing Americans. The price you pay for this is more than what you would have to pay for the same product made right here in the U.S. Yes, it's a good product, but this is proof that having things made in China is a complete ripoff. Make it here in American and have some pride. As anyone can see, it'll get bought because I just bought it.

Great for home or grilling. made of solid steel not the cheap ones that bend and flex. If your serious about cooking hamburgers, this is the utensil to buy.

しっかりしていて、面も大きく、使いやすい！予想以上でした。

Handle is shaky ...

Das Geräte kam aus Amerika und hat es hat Wochen gedauert. Vielleicht auch durch Corona. Der Pfannenwender ist jedoch auch sehr gut verarbeitet, auch der Griff. Anschaffung lohnt sich.

This is a professional-grade spatula, and you feel it the moment you pick it up. Heavy-duty stainless steel, zero flex, perfect edge. If you make smash burgers, this thing is a weapon, it scrapes clean, presses perfectly, and gives you that restaurant-level sear every single time. But it’s not just for burgers. Eggs, steaks, stir-fries, anything on a cast-iron, this spatula handles it with authority. Balanced, durable, premium. Simply put: Top-tier. Elite. Built for people who take their cooking seriously.

Very sturdy and exactly the kind of tool you want to make burgers. Now all you need is a cast iron gridle and a good meat.