Airbrush Kit with Air Compressor, 40 48 PSI High Pressure Air Brush Non-Clogging with 0.2/0.3/0.5mm Nozzle/Cleaning Sets, Ideal for Painting, Modeling, Cake Decor, Makeup (Black, 48 PSI)

Love how easy it was to use this airbrush kit for great results. I could not find my old airbrush and needed something to finish for my artwork. I sprayed this helmet (pic) just in time with transparent black paint. The atomization/spray was easy to control. The airbursh design was simple. It was easy to fill and easy to hold. The compressor it came with is more than sufficient and had 3 working modes. It was compact. I purposely got a kit with higher psi compressor than I immediately needed. The hose length was just right. The paint quality was professional-looking and smooth. The kit also comes with tool required for cleaning. The kit has saved me much time and effort. This is good value.

This is my very first *real* airbrush kit. I've got one from the 60's that uses compressed canned air, but this is a whole different beast. I've only ever painted using stencils in the past, but wanted to get into painting toys and diecast cars. Getting this put together and ready to spray was very easy. If you've ever put anything together, this is pretty much plug and play. Cleaning....Had to look up a video for it....Usage...had to look up a video. Haha Figuring out the right amount of pressure to use to get an even coat of paint took quite a bit of practice. I was able to get satisfying results after about an hour on some particle board. I also learned that you DEFINITELY want to use thinners with your paints because you can run out pretty quick if you aren't careful. They didn't dilute the color much, and I saved a lot of paint. Out of the box you get the air compressor, air brush, and a cleaning kit. Everything seems to be pretty decent quality. I kinda wish it came with some more filters and some plastic cups, though. My first real project is adding some blood to an old broken kid's toy I found a while back. I'd always wanted to do something with it, and using the airbrush seemed to be a pretty solid idea. After spraying, I went over it with a sponge to give it some texture. I think it turned out great. I have lots of ideas for customs, and this is going to be a fantastic tool for my future projects. It's great for an absolute beginner, and well worth the money. At the moment, I can't see any reason to get something more expensive.

The product's fine, unfortunately the first one came flawed, fortunately Amazon Customer Support solved the issue by send me another one, a 5 stars to Amazon Support, thanks!

This airbrush has been so much nicer than the first one i bought. Easy to clean and easy to run. I have nothing bad to say about this so far. I'm an amateur modeler and this works great for my skill level and abilities. Has everything you need included!

A terrible product, and something to stay away from. The airbrush itself is shoddy, in spite of the nice extras the kit comes with. It suffers from what looks to be bad tolerances and gaskets around the needle, which allowed it to leak paint even when the trigger was not pressed, and caused it to clog quickly and often (approximately every 2-5 minutes of active use). I swapped to a neoeco sj83 I had to test if the brush or setup was an issue, and even with the same paints, compressor, etc - the neoeco had no clogs in an hour of regular use. The airbrush is a dud. As is the compressor, which additionally failed and tore an internal gasket within an hour or two of being used at minimum power, with time set aside for cooling it down (it will also silently overheat). As is, the whole kit is reduced to a nozzle cleaning kit and instruction manual within a few hours of use. Buy a gahleeri compressor & airbrush combo kit for $15 more, and save yourself the suffering.

Great air pressure, good quality and easy for beginners.

use for small projects and prep glass for laser etching

If you're trying to use this to air brush faux fur for any kind of project, just bite the bullet and get an actual quality airbrush and air compressor. This will barely produce the amount of pressure needed, and after a few uses it WILL most likely clog. Only a few proper guides are around that show how to brakedown/reassemble THIS specific model (most of the guides show the nice models that have different pieces). I spend hours on a project that should have taken maybe an hour. The warranty is nonexistent by the way. The QR code link for the warranty just sends you to a dead website. Long story short: it's O.k. for smaller projects probably, but not so much for larger ones. The air compressor motor kept sputtering out during prolonged use past 5 minutes as well (with a pause every 3-5 seconds of course.)

Really good starter kit. Eventually you'll want to upgrade to at least a compresser with tank. The compressor supplied vibrates so much it fell off my desk a couple of times. I would have given it 5 stars if it weren't for this.

The airbrush crested excellent art, until it was burnt in house fire.

いろいろ調べると電源式の物と比べてどうこう書いている人もいますが、そんな事分かっていて購入を考えている人が見ていると思うので、コレはこれとして評価すべきかと。私は期待通りと言うより期待以上の使いやすさと、音が静かなので、夜中に家族に気を使いながら塗装したりするので、重宝しています！塗装に関しては缶スプレーに近い感覚かも知れませんが、慣れればキレイに仕上がります！買って良かった！

Considering the price this brush works surprisingly well. Perfect for doing base coats and blending on larger surfaces. Don't expect to do fine work as the 0.2mm needle won't really work (not unusual to be honest) but as a starter airbrush this is excellent. Just remember to always blow dry air through as you finish spraying as of you don't it will clog in seconds.

Got my new airbrush and so excited. First time using it. I found that it was quite easy to use and need to get the hang of it to spray the good quantity of paint. The initial setup process is hassle-free and instructions are pretty clear and accessible for beginners like me. It can be used for a lot of applications but I used it to paint a garden gnome and it was so nice that my sister left with it. So basically performance is consistent, ease of use and it provides great results across the board. Overall, I'm quite pleased with this airbrush system, it works very well, I highly recommend it to anyone.