Belkin Power Strip Surge Protector - 10 AC Outlets, 15ft Heavy Duty Metal Extension Cord with Wall Mount Holes for Home, Office, Travel, Computer Desktop, Laptop & Phone Charging Brick

This Belkin surge protector is an absolute workhorse. I use it for all my power stations, and it handles everything with zero issues. It efficiently manages multiple devices and charging bricks, and the build quality is incredible—solid, durable, and made to last. The 15ft heavy-duty cord and wall mount options make the setup super convenient. My go-to solution for reliable power management at home or on the go.

I'm thrilled to still be able to find brand-new metal power strips today. Metal power strips still far surpass the cheap plastic surge protectors you can find at drugstores, office supply stores, or anywhere else at all. They are infinitely more durable, have better components, and are safer from a fire standpoint. Should a lightning strike or otherwise massive surge cause the insides to burn up, the metal case will safely withstand it. Next, I'm astounded by the cord length! I had no idea it would be 15 feet upon initial purchase. Thus, I "looped" the excess cord around the back and side of my desk to keep it out of the way. For those not aware, you shouldn't keep power strip (or any) cords bundled while in use, as this can lead to overheating and/or restrict power flow in the long run. Secondly, I'm very impressed by the receptacles (and 10 of them, at that? You have to be kidding!) They secure the plugs very nicely, and have good-quality brass contacts inside. I'm sure they will hold up for many years, unlike cheaper power strips where the cheap contacts get worn out and become loose over time. The large lighted switch makes for convenient control, and there is an LED to indicate surge protection status. While listed as a "workshop" power strip, this one actually has a base surge suppression rating of 400V at all levels - far better than many other surge protectors in this price point. As such, it is also a good choice for a computer setup, as I happen to be using it for. I have it at my desk for my laptop, printer, USB/phone chargers, and a lamp. If using on hardwood, though, I'd recommend putting some velcro or felt pads on the bottom to avoid scratching the floor. I have it on carpet, though, so this isn't an issue in my case. Would highly recommend and purchase again in a heartbeat!

There’re a few really good things about this multi-outlet surge protector: First, it’s a Belkin. Second, the cord is long and heavy, not flimsy. Third, 10 outlets (but, be careful. Likely as not, you don’t want to have ten of anything running at once on a circuit). Fourth and best of all, the case is metal, not plastic. The metal case makes this ideal for a special grounding application I have. Very good product for the price.

So much better than the little plastic power strips. I use these for workshop power supply and for an elaborate Christmas display.

I had three others. One just went mostly out only two outlets were working. my older ones are about 27 years old. So far only lost one. Powered my entertainment center so used heavily every day. Also use another for my amps, pedals, recorder, and PA. Also used for my compuer set up and all the other stuff I have plugged in including my surveillance system. These are heavy duty industrial and I consider them the best. When we moved in to our house there was a problem with the main electrical underground cable running to the house. The insulation was cracked and during a rain storm we lost voltage but had amperage. Two other brand protectors shorted, arched loudly and caught fire about 1am. One was in the master bedroom and scared the hell out of me. Got them both unplugged, fires out and saved our house. DIDN'T even faze these. I'll continue to purchase these strips as long as the retain the high quality I've come to expect from them.

I mounted this power strip to the underside of one of the shelves of a wooden component stand that I built to hold all of my vintage analog audio components: some turntables, a receiver, and an old tube amp - some valuable stuff. There're two lips on either side of the metal case; I drilled four holes, two per side, then mounted it to the shelf using woodscrews. I oriented in such a way so that it's completely hidden from view and yet the ON/OFF switch is still easily accessible from the side. I'm always fretting over electrical storms when it comes to my vintage electronics, and even though this thing has surge protection, I still want to be able to cut ALL POWER going to the components by turning off the ON/OFF switch during the times when not in use. I know then that no lightning storm-type power surges can cause any damage. As for the strip itself: It's metal. It's heavy duty. The ON/OFF switch is BIG and easy to find, and it has a quality feel to it when I flip it on and off. The cord is REALLY long. This is nice since I don't have to run a heavy duty extension cord to the surge protector from an outlet located 6 feet away. 10 outlets are just enough (12 would have been better). It has an old-school look that matches the character of my vintage audio components (even though it's completely hidden from sight). Highly Recommended!

I got this for my WFH setup. It's plugged into a 30A appliance circuit and I mounted it to the wall behind my desk. The weight and heft of this item is impressive. It's like having 5 power outlets in a box. Four stars because each time I activate the motor to raise and lower the desk, my monitor blacks out for a split second. I am not sure if that is the surge protection working or what, but it seems like it's probably not good for the equipment.

These surge protectors are classic and well rounded pieces of equipment. High quality materials, does it’s job, no frills. The outlets are spaced out enough to fit a few things easily. If you have bulky chargers, they will all still fit for the most part. The cord length is more than long enough, I haven’t needed anything longer yet. I’ve bought two of them for how versatile they are. The surge protector also has some mounting points on the back so you can easily mount them on the wall if needed. Value I think is pretty good! For the quality of materials, and versatility, you can’t find much better for the price. They are on the more expensive side for a surge protector, but I expect to use it 5-10 years from now. Let’s hope those materials hold up over time because they’re very nice.

Boîtier en acier, j'aurais aimé acier un peu plus épais. Cordon en caoutchouc souple. Les prises enfoncent un peu quand ont branche. Je le recommande quand même.

La extensión tiene un cable muy largo, y de buen calibre, es completamente de lámina, así que solo cuidado de no dejarla caer por que seguro te lastimara el piso y se podría abollar el cuerpo de la extensión. Tiene suficientes enchufes, por lo que conectar equipos no será un problema, cuenta con su fusible de seguridad con lo que hemos de proteger nuestros equipos. A mi juicio y consideración es un muy buen producto para conectar cargadores, telefonos, computadoras y estar seguros que no morirán en una descarga eléctrica.

Es un excelente producto. Lo utilizó en exteriores. El cable es muy largo lo que permite su uso como extensión. El material de construcción es muy robusto y parece duradero (y queda muy bien a la vista). Todos los contactos funcionan. Llegó en tiempo y muy bien empacado.

Love the retro / industrial vibe of this power bar!! It's actually one you won't want to hide!! Super strong metal, heavy, quality construction - can't go wrong with Belkin!! I would buy again if I need more than 10 outlets 😋

Très bon produit il est solide et a une bonne longueur de fil et un bon calibre.