F2 Master Mini Cordless Rotary Tool Kit for 3D Printer Sanding | Engraving Pen, NeoPulse Motor, 5 Speed, Revostor Hub, 35 Accessories, for Precision Polishing, Drilling, Carving, DIY Crafts

I’ve been using this Fanttik F2 master mini cordless rotary tool for a few months now and it’s been perfect for foam and 3D prints for cosplay. The instructions to begin using it were super clear and easy to follow. It has a good battery life so I can use it all day on and off without issue. I’ve found it similar to use to my old flex shaft dremmel because of the small size and having no cord is easy to handle in tight spots and small details. The only issue might be the strength, like idk how well it would work on metal or hardwood, but for my hobby purposes of EVA foam and 3d prints it’s perfect.

I really like this tool. I have been learning how to woodburn for my daughter’s wedding gift. This really helps clean up lines and do all kinds of small things. Good assortment of bits to do different things. It’s not a caring as a dremel but it’s easier to contol. It’s good quality and feels sturdy in you hand. Great addition to my tool kit

The Fanttik F2 Master is a compact and versatile cordless rotary tool designed for precision tasks such as sanding, polishing, engraving, and light drilling. Its lightweight design and ergonomic features make it suitable for hobbyists, DIY enthusiasts, and professionals seeking a portable solution for detailed work. Key Features: • Brushless Motor: Equipped with a brushless hollow cup motor, the tool operates quietly and efficiently, reducing noise by 30% compared to standard motors. • Variable Speed Control: Offers five adjustable speed settings up to 25,000 RPM, allowing users to match the speed to the task at hand. • Revostor Hub: Includes a 360° rotating magnetic stand that neatly organizes the 35 included accessories, facilitating easy access and storage. • USB-C Charging: Features a universal Type-C port that fully charges the device in approximately 40 minutes. • LED Indicators: Incorporates an LED speed indicator and a front LED light to enhance visibility during operation. Pros: • Portability: Weighing just 0.22 lb, it’s easy to handle and transport. • Ease of Use: Users find it intuitive, with a seamless pressure-sensitive speed control switch. • Battery Life: Offers up to 72 hours of continuous use, making it reliable for extended projects. • Accessory Variety: Comes with 35 different bits, catering to a range of tasks. Cons: • Collet Size: Compatible only with 3/32” (2.3mm) attachments, which may limit the use of some standard bits. • Not for Heavy-Duty Tasks: Best suited for light to medium tasks; may not perform optimally on heavy-duty projects. User Feedback: Customers appreciate the tool’s performance in detailed work, such as cleaning up 3D prints, wood modeling, and engraving. The ergonomic design and quiet operation are frequently highlighted as standout features. Some users have noted the limitation regarding the collet size but find the overall functionality and accessory range to be satisfactory. Conclusion: The Fanttik F2 Master Mini Cordless Rotary Tool Kit is a well-designed, efficient tool ideal for precision tasks. Its combination of portability, user-friendly features, and a comprehensive accessory set makes it a valuable addition to any DIY enthusiast’s toolkit. While it may not replace heavier-duty tools for more demanding jobs, it excels in its intended applications.

EDIT: fanttik has offered a refund for my purchase. their customer service is top notch and I hope they take my feedback to heart. i'm not out to talk down on the product, I just hope to make it better. their products are catering towards a very specific audience and if they play their cards right, can become a standard for a lot of industries. but for the hobbyist, they all already have eyes on fanttik and I just hope there may be some revisions on this specific part where it's a lot easier to use and makes projects easier, not more tedious. because of their recent interactions with me, i've updated my review from 3 star to 4. for context, i do a lot of tinkering. i 3d print a lot of things, i build a lot of things, you get the drill. i was on the fence of refreshing my dremel kit with this unit. i've purchased and used fanttik tools before and love the quality. the extra bit of price is worth it. when i saw this tool drop, i knew i had to get it. but not at the $80 pricepoint when it first launched. it's currently april 10th and the price corrected down to $60, but I still feel it's a tad bit overpriced. firstly, the pros. i've only used the grinders included in the kit. so far, so good. battery holds a good charge and the click/press release that fanttik likes to do works well in this case. no pun intended. now the cons. turning the unit on, you have to turn a knob at the top of the tool. in previous tools, that same knob was used to change the rotary speed and turning on your electric screwdriver was as easy as the press of a button. with this new dremel tool, you have to physically turn that knob to turn the tool on. THEN you have to press the button to get the dremel spinning. might not be such a big deal for a quick part cleanup, but when you're using the tool to constantly sand/grind, fit, grind, fit, grind fit, it gets annoying having to put your part down just to turn the tool off via the knob. you would think that they would opt to use a momentary switch instead or the button on the tool toggles between 1-5 speeds and then an off state, but no, you have to carefully turn the tool off with the knob once it's been turned on. i'm not sure why they opted to do it like that. maybe because the nature of the electronics needing a good amount of power to operate and the knob acts as a sort of cutoff for the internal battery to the board. regardless, very tedious to use when you're doing a lot of fit and finishing. secondly, the chuck head can get difficult to assemble if you remove the little plastic covers. they don't fit very well until you can get the 2-piece plastic shrouds on properly. a quick-release option would have been nice here. or an all-metal chuck instead of a hybrid metal/plastic system. lastly, it's worth mentioning again that there are no momentary buttons to actually spin the toolhead when the knob is on. i consider that and the power knob two separate issues. i want to be able to put the tool in my hands and turn the rotary attachment with the press of a finger, then have it stop spinning when i release the button. but again, i would need to put the part down in order to turn the tool off. even worse, the button placement is at the top of the tool, opposite where my fingers rest. so even changing speeds, you can't do it at an easy press of the button. you still have to put the part down to change the speed. again, not a big deal for a quick sanding, but most people would not buy this tool for quick jobs like that. i feel this tool is more marketed at hobbyists who would be using this constantly in one session. all in all, i still am somewhat satisfied with the purchase, especially because my old dremel motor burnt out. but if you don't need the fanciness, go for a cheaper dremel unit, something usb powered and can be recharged. they're about 50% cheaper. you're mostly paying for hype and sleekness here.

Excellent product for the cost. If you have any hobbies such as RC airplanes well then this is a must have item. As for the company that covers all these products they have a wide variety of items that are of high quality. Batteries hold up well on a single charge and have the torque throughout the charge. Strongly recommended.

I saw this product on a few videos and decided to buy one. I have several Dremels, but this looked like it would be so much better for finer details, I figured I'll join the "fad". WOW! I am so glad I bought this! First, it works amazing! Perfect for fine detail, hard to reach areas, NO cords, plus fits in your hand perfectly! Easy to turn on and adjust. I PROMISE YOU, you will not regret it, IF you do crafts, dioramas, vivarium work, DIY toys, sporting goods, on and on! ZERO BUYER's REMORSE, plus, I should have bought it sooner! It is not for heavy duty work like a corded Dremel, but that's WHY you want it! NO complaining, know up front it is perfect for fine detail, foam, balsa wood, plexiglass, etc., not PLYWOOD ROUTING! ;) I have not used all the tools yet, but I kind of wish I would have bought the one with more tools, just because it's COOL!!!!!! Let me add, I have not let anyone in the house know I have this, because I KNOW they will want to use it, and parts will be lost, it will get dirty, NO... IT's MINE, ALL MINE!!!!!! lol

Im getting old. I build plastic model kits. .y fingers ret fire and stiff easier than they used to. Was looking got a way to automate the process of at least bring a power tool in to do most of the work This device seems to hit the bill. The device is about as fat as a Sharpie, comes right sn array of bits to go different jobs and is packed in a clever case design. You can charge the device right USB c in the case.

The good- the design. How its compact, how the bits are stored, mostly, and ease of use. Pretty nifty pressing something and the tool pops up , makes you feel high tech . Its perfect for smaller lightweight grinding and whatnot. I use it for 3d print clean up. Where it could use improvement **They may have done this on other models I don't know. -Bit access/ease of getting bits out of the holder. - While it is a great storage solve, there is no clear way to get the bits in and out, unless your using tweezers or just pushing on it or whatever (you need to use it to understand what that means), unless I'm missing something. I was surprised because of the way the toll itself pops out I figured that getting bits would be similar, it not. Collet issues- The diameter of the collet where you insert the tooling is tiny, Its a "twist to tighten" ideah like a drill chuck, but the two of the wheels are small, i said that, but also they come lose easily when working with it which causes the bit to just fall out after some rattling. I was cleaning out a hole on a 3d printed part, a deeper hole .2" diam, and wanted to just clean up the tube, the bit fell out of it a few times, it shouldn't have, but it may not ha been the collet, it could have been the fact its rally hard to get it to tighten around the it? , Adding a stop button on the rotation would really clean that up, or making the diameter of the collet itself bigger , meaning the knobs that have to be twisted. Power Button location- while i like the fact that you need to switch the device on and then power it up, it is counter intuitive and border line dangerous to have the power button at the opposite end as the tooling. A major oversite in design, but not the end of the world It could cut you easily if you need to shut it off or are a little careless when doing so because you need to flip the tool around to use it after both powering it on and after use. , or it could cut your project or whatever, - Having the power button on the tool end where you could quickly shut it off , would be better and safer, not that i think this could do serious damage to you, with the right tool head, i think you could be cut enough. are these deal breakers? NO. i will most likely retro fit it with 3d printed parts to make the coller bigger and make a stand, it's still a quality tool and feels good int he hands- it has its place. I would just do some remodeling to the layout and call it a day. Good job guys I love the design, your brand has made a good name for itself.

Très bon produit, léger et maniable. Large choix d’outils. Seule bémol, pas de témoin de charge. On est prévenu seulement au moment où il n’a plus de batterie. Pas moyen de le vérifier avant.

Love it. Used it a couple of times. Have used only a couple of bids so far, but OMG it works so well. Worth it!

Das Fanttik F2 Master hat mich positiv überrascht. Trotz seiner kompakten Größe bietet das Multifunktionswerkzeug erstaunlich viel Leistung und eignet sich hervorragend für 3D-Druck-Nachbearbeitung, Gravieren, Schleifen, Polieren, Bohren und feine Bastelarbeiten. Der NeoPulse-Motor läuft ruhig und kraftvoll, und die 5 Geschwindigkeitsstufen ermöglichen eine präzise Anpassung an verschiedene Materialien und Anwendungen. Mit bis zu 25.000 U/min steht ausreichend Leistung für detailreiche Arbeiten zur Verfügung. Besonders praktisch sind die 35 mitgelieferten Zubehörteile, sodass man direkt loslegen kann. Der Akku hält erfreulich lange durch, und das Werkzeug liegt dank seines geringen Gewichts sehr angenehm in der Hand. Für die Nachbearbeitung von 3D-Drucken, das Entgraten von PETG- oder PLA-Teilen sowie kleinere Modellbau- und Elektronikprojekte ist das Gerät ideal geeignet. Fazit: Ein hochwertiges, vielseitiges und leistungsstarkes Akku-Multifunktionswerkzeug mit umfangreichem Zubehör. Perfekt für Maker, Modellbauer, 3D-Druck-Enthusiasten und Heimwerker. Klare Kaufempfehlung!

これは素晴らしい。 今まで、Doremelのルーター（有線タイプ）でなんでも使ってましたが、ケースは巨大だし、設置も面倒でした。 しかし、Fanttikの充電式ルーターを買って、世界が変わりました。力はもちろん有線AC電源に比べると落ちます。しかしそれでも十分な仕事はいくらでもあります。工具においては、大は小を兼ねないないと実感しています。手軽です。回転精度は問題ないです。 丁寧な日本語マニュアルが付属しています。収納が楽できちんとしています。ビットが行方不明になることがなくなりました。モーターがブラシレスなのも気に入っています（ドレメルはブラシタイプなので保守が必要です）。なお、ビットの径は2.4mm固定なのでご注意ください。

Great item for hobbyists, it comes with a ton of bits for grinding, engraving and polishing, great for anyone who does a little kit bashing or taking sharp edges off projects. Its battery life leaves a little to be desired. could do with being upgraded to a battery above 1000 mAh. The bits are capable of working on a variety of materials including wood, glass, plastic and ceramic. The flashlight on the front is very handy, making it easy to light up those dark areas of your projects. This is truly a fantastic tool. For any hobbyists out there.