FLEXISPOT Reversible L-Shaped Corner Standing Desk with Monitor Shelf

A little complicated to build, definitely follow instructions and assemble with tops upside down on the floor due to adjustments needed with the drive shafts. All in all a high quality desk, sturdy and quiet, smooth lifting.

Great desk, plenty of room for a monitor arm for extra monitors. If you use multiple monitors, you will likely want a clamping monitor arm so that it doesn't take up the entire surface area.

The desk was delived in 2 boxes, 1 for the tabletop and 1 for the base. Installation was fairly simple and the instructions were more than adequate. However, this desk can only be configured in 1 way. You can't switch the long and short sides, which was a bummer for me. For my setup I wanted the long side to be against the main wall with the short side hugging the side wall, but this wasn't possible. There also doesn't appear to be any way to purchase a L or R configuration, there's only 1 option. I has to opt for a different final placement for the desk than anticipated in my home office. It's not a deal breaker, but it is definitely an annoyance. Besides that, the desk is exactly what I was wanting it to be setup. A hole in the corner to help with cord management would have been nice too, but that's easy enough to do after the fact. I love how it looks, it feels sturdy for all my stuff, and the extra storage is nice too. Just wished they offered it in the flipped configuration.

This item has NO USER manual for the table and the riser on top. A ton of pieces with no direction. Everyone in videos claim it is easy to put together, HOW? I have looked online for the user manual, on the website of the company, and NOTHING. NO ONE USER MANUAL, NOTHING. VERY DISAPPOINTING.

Well built desk. Takes a VERY LONG time to assemble, and we aren’t new to this. Just letting you know and it’s pretty heavy to haul to your office in the boxes. It is STURDY and the raising and lowering works great. We researched and read a ton of reviews. Excellent VALUE for a stand up desk. Not as deep as our last desk, but has the drawers which work GREAT for our monitors to stand on. Highly recommend. Now we have decided we need an anti fatigue mat to go under it for standing.

This is a fantastic desk! I have been loving the desk since its arrival and the assembly is very easy. I wholeheartedly recommend it since it’s worth the price

I don't write many reviews, but after reading a few other reviews say that the product arrived damaged, I wanted to add my experience. First off, the desk showed up in two boxes and the delivery company driver was not taking it easy on them as he unloaded. When I went out to get them after he drove away, I saw a fairly large area of the edge on one box was torn/crushed and immediately feared for the worst. However, after bringing the boxes inside and examining all the parts, everything was in perfect condition. It's possible I was lucky and the damage to the box was in a spot with adequate protective packing material, but in any case the product was in excellent shape and I was relieved. Assembly took a couple hours but after that the height adjustment worked fine and it looks great. There were a few parts that weren't labeled but it wasn't too difficult to figure out where they went. The instructions could have used a little more clarification in some spots but they weren't too bad. I bought this desk because of the appearance and dimensions, and didn't really care about the height adjustment feature. I'm happy I picked this one.

The good: - Raises and lowers consistently. - Color is accurate to photos advertised. - Nice size and the riser is helpful as a monitor stand. - Drawers are convenient. - Includes presets for height preferences. - Price is fair The bad: - There are missing pilot holes in some spots. A drill helps to push those screws past the veneer and force them to self-drive. - If you are shorter, this might not be the desk for you. The lowest it will go is 28.3 inches, which is slightly higher than I would prefer. (45.9 is the highest it will go.) - It is a tiny bit wobbly, so make sure this is against a wall and that you really secure all screws well when building it. If you tend to lean on your desk heavily, this is not the desk for you. - Be prepared that this will take 4-6 hours to build, and it does require a second person to help hold some parts while the other person connects them. (I managed to handle this with a saw horse and careful balancing, but I do not recommend this.) It arrives in two boxes and is very heavy. You need two people to move it safely, or at least a dolly. The REALLY bad: - The instructions are TERRIBLE. This is NOT for beginners. - This seems to have been originally designed as a long tabletop, with a short tabletop that would connect. They must have changed the design to be two short tabletops with a square connector in the corner. This is not a problem, because they include a stabilizing bar to give extra support, but they did not update the manual properly. Because there are no pilot holes drilled for this piece, you will need to estimate where it goes based on the manual drawing. - The right-config “Plan A” are an exact copy-paste into the left-config “Plan B” portion of the instruction manual. So, it APPEARS that there are separate instructions for each configuration, but really, they are just two sections with the EXACT same instructions. You may not realize this until you get it partially built. When you put it upright you will realize that it is backwards. If you want the left side to be longer, you have to mentally mirror the instructions to make it work. - This is even more confusing because the instruction manual for the tabletop is labeled Plan A (right config) and Plan B (Left config), but the instruction manual for the legs are opposite! Plan A is now the left config, and Plan B is the right config! Bottom Line: - In you want this desk to be configured with the long side on the right, it is a fine desk. Not as sturdy as I would prefer, but it works well and looks nice. - If you want this desk to be configured with the long side on the left, PAY VERY CLOSE ATTENTION BECAUSE THE INSTRUCTIONS ARE WRONG. You will need to mirror the instructions instead of copy them, which may be difficult for inexperienced assemblers.