Nilight in Channel Rain Guards for Dodge RAM 1500 2019 2020 2021 2022 2023 2024 Quad Cab Original Window Deflectors, Vent Window Visors-4PCS

Test fit first. At first, I was convinced these were the wrong size for this 2013 Crysler Town and Country. Trying to get them to fit in the window trac didn't seem possible. After starting the front than bowing on the middle get the back in the track. The center was bowed out so much I didn’t think it was the right length. I was just testing the fit and didn’t appear to be the right size. I gave up on the driver’s side and thought I would see if it was the same on the passenger’s side. Again, it appeared too long to fit. I decided sine I didn’t peal the tape yet to see if I could work in in the channel front to back. About an inch at a time, I worked it in the channel. It was going in and looking better. As I got all but the last five inches or so inserted I could see it will fit and fit well. I also realized if I put this last part in as a test fit, I might not be able to remove it to start pealing the tape. When I started the tape, it would keep going back down. To keep it from doing that I creased the tape backing in a 45-degree angle so I could pull it once in place. I removed it from the van started the ends of the tape to apply permanently. I repeated what I had done first the front bowed to start the back. I than worked it in the trac from front to read and all lined up and looked great. I did the same for the driver’s side and worked like a charm. The guards for the center window also seemed a little big but with test fitting I was able to see they also go in easier from front to back. This set comes with everything you need other than cleaning wipes to clean the channel trac. I didn’t use the trac clips to open the trac. It does come with a small roll of replacement double sided tape if you damage the preinstalled tape. If you test fit before pealing the tape and understand how they install. The need of having to replace the tape is lowered.

Perfect fit for 2018 jeep grand cherokee. The provided tape is worthless, peeled that off with my thumb. Didn't use the provided tape, got 3M from local auto parts store, applied that to the window vents. I didn't use the provided clips either as they did not sit in channel well. The first one I went to put in literally slide down the channel and into the door! That was fun to remove the door panel to find it. Anywhom, they work, they look clean, you can see through them, excellent product. You do get more wind noise with windows down. They remain in place just fine if you use better tape (again, did not use the in channel clips), have gone 80mph with windows down, they are still there. =)

He's a really nice they work really good no a problem I have is that first they send me the wrong set for my truck and I'd return them and order the right ones for my truck and way to even longer otherwise it would have got a five-star easy to install yourself

I had purchased this back in 2024 and have been procrastinating on installing them. I finally got the chance to install them and I’m happy with the results. They were easy to install after the first one was installed it was a smooth install. Took me less than 10 minutes. They are durable made to fit perfectly, although I’m not too sure about the adhesive tape that comes with it. We should see in time if it holds. The windows go up and down without any problems and the alignment is perfect. I installed them on my 2016 Ram 1500 Crew Cab. Best Buy ever.

I've had many Nilight products and have been generally pretty happy with them. Sadly, not this one. 1st, yes they are smoke colored. Light smoke colored, about half as dark as they look in the photos. I have a white vehicle with black trim and frankly they look like crap on it because of that color, so I'll be looking for something else I guess. I wanted darker and feel deceived by the photos. 2nd. I've never owned a set of window vents similar to this (and I've bought many over the years) that required metal clips be put in them. All I see there is a potential for glass and tint scratching, so I didn't install them. I couldn't have anyway, because it says 12 clips were included and I got TWO. 3rd, the nice wider tape it shows on them in the video was non existent. Instead was some really junky tape that won't stick much to anything other than the red piece on them. It was less than 1/8" wide. I ended up just pealing it off and putting some good 1/4" 3M tape on it. Perhaps if you got rid of the little kid gloves that are included (not meant for grown men to wear) you could spend that money on some good tape and wouldn't need those stupid metal clips. Sure, they included a whole roll of that tiny junk tape because they knew you'd need it, rather that junk use some good quality tape to begin with. Do better Nilight and improve this product.

I just installed these yesterday but so far so good. They fit perfectly and they went in relatively simply. The alcohol pads they provided were dry by the time I took them out but luckily I have my own. They don't really say what the purpose is of the metal clips that they provide, but by the looks of things after I put them in they are to help keep the channel open on the edges so the window can roll up without hitting the rain guards. They provide you with an additional role of 3M tape in case it's needed, gloves to help keep your hands clean and keep your oils off of the tape, and a plastic multi-tool to help install the metal clips and to slide inside the window channel to help press the tape in place. Like I said, it's only been a day but overall I'm happy so far.

Super easy to install and they look great on the jeep

They're alright... I do appreciate the product coming with the extra tape. The original adhesive was not aligned well/hung OFF of the guard, so I had to re-lay some straight lines. After removing the plastic from the outside of the guards, I noticed each had a discolored square where the labels were. The clip install in the instruction manual didn't make sense, so I had to find a YouTube video for it. The plastic scraper it came with was also very handy when adjusting the weather stripping around the clips. Driver side piece didn't seem to fit as well as the passenger side, but if you squint it's mint.

It will do what is supposed to do. But you will experience some noise in highway. Pretty normal for this type of parts

While the install was good and easy, the end fitting struggled on my front doors... Windows didn't fully close..... Then my rear window broke one of the parts despite the fit being fine.... So very sad about the breakage

Facil instacion nada complicado. le da un buen luck al jeep. los deflectores los instale en un jeep wrangler sahara jl 2020. se ven muy bien, esperemoste que el sol no los deteriore con el tiempo.