por-15 Rust Preventive Paint 1クォート 45404

Please READ!!! Save yourself and UNDERSTAND!!! This product is AMAZING!!! First off painting anything is all about PREP work! Everything must sanded/scuffed, cleaned, degreased, washed off with water, dry, decent weather conditions if your outside, your work should be taped off, covered in plastic or newspaper and follow the directions on the cans! My experience with these products…ALL 5 star!! The cleaner/degreaser ***** The cleaner isn’t some harsh chemicals that burns your hands! It doesn’t smell and works amazing! Get a spray bottle and light scrub brush and scrub your work area. Dilute it with water 4:1. The metal prep/rust inhibitor ***** If your work piece has rust USE THIS! After sanding/cleaning the area and washing it off use this. It will take light rust (that maybe you couldn’t sand all of it away) and chemically breakdown the “rust” properties turning it back into its original metal state. Which then is a paintable clean surface. Listen Peoples, rust is like a cancer, ither cut it out, put in replacement metal or use this, and FOLLOW directions!!! It works!!! Read the DIRECTIONS!! The Por-15 paint*****The BEST PAINT!!! This paint is some serious stuff! It gets rock hard! KEEP THE CAN AND LID PERFECTLY CLEAN, the lid will seal itself shut if there’s ANY PAINT ON THE RIM!!! (That’s why they sell 6packs of small cans) and don’t paint outta the can, poor into something else. Stir the cans!!!! There’s 3/8inch chemicals at the bottom of the can of you don’t stir you’ll hit the bottom and be like”ohhhh what’s this”, oppps!!!! This paint will harden like steel it’s AMAZING STUFF!!! It’s like epoxy, but thinner.(the longer the can is exposed to the air/open the thicker it gets fast!!) When you use this paint you gotta be quick, in a rhythm and can’t stop. At this point everything should be ready for paint. If your using the topcoat paint as well, the topcoat goes on BEST RATE after this drys to “finger drag”. Meaning when you touch the painted surface it doesn’t stick to your finger, and you can drag your finger over it without removing any paint. Once at this point topcoat it RATE AWAY! Don’t wait because you’ll have to sand it, the topcoat adheres BEST when the por-15 paint is finger drag. The topcoat fills in all the imperfections the paint missed. BE heavy, don’t stretch these paints out, (small roller works the best) The topcoat smooths everything to a beautiful finish. THE PAINT AND TOPCOAT ARE NOT THE SAME!!!! They are totally different!!!!!! If you use the topcoat only that’s fine I guess but it’s no WAY near protected unless you use the Por-15 paint then topcoat. The paint hardens like steel, the topcoat does not harden the same way!!!! They are totally different!!! Yes it dries, but it’s just different. It says DTM on the can(directly to metal) and I’m sure you can only use the topcoat but if you want SERIOUS protection USE THE PAINT and TOPCOAT. If your only using one of them I would choose the paint over the topcoat. I restored a truck frame using these products. It’s very time consuming, and prep work!!! But WOW IT WORKED FLAWLESSLY AND WAS WORTH THE TIME!!! If you buy a can and paint over a completely rusted out item without prepping it, don’t expect a miracle. That paint hardens so hard the metal will probably dissolve and the POR paint will be holding it together it’s that strong lol. The people reading this will understand… Por-15 actually surprised me!!! I always used Rust oleum, which is good stuff but I’m a POR believer!!! There stuff is pro!!! I didn’t get a chance to use the primer, but again the key is after painting the rust protection paint, finger drag and topcoat heavy rate away and it’s smooth like butter…YOU DONT HAVE TO SPRAY IT, if you do my research says get POR15 solvent!!! CHEERS! good luck!!!

Super bonne peinture. Couvre bien et extrêmement résistante. Il faut que vous sachiez que le contenant ne sera pas ouvrable lorsque vous allez le recevoir. Le couvert sera probablement collé/cimenté au contenant. Il va vous falloir prévoir un nouveau contenant de peinture 1 litre pour transvider après avoir percé le contenant d'origine. Il m'a été aussi impossible d'ouvrir le 2ème contenant par la suite tellement il était le couvert était soudé. J'ai due transvider une 2ème fois dans un contenant neuf...

This is probably the best paint for rusted things. I have tried others and this thing is though, very though. I made a mistake once and tried to scrape it off that was not fun. This is the first product that I can say that works and is the first product that does not have tannin whis I sware by. So get this and u will not regret it but it will take a couple of coats to get it right. Just figured it our they now have different colors which is great for my ww2 american fire extinguisher nguisher re build nice red.

Good stuff

This stuff is great for undercoating or painting rusted metal. A small can goes a long way. I undercoated (by paint brush) my entire chassis of my pickup with 1 can - sure it took forever, but it leave a great strong finish that looks like a brand new frame. Is VERY hard to get off your hands, not at all like paint. Would buy again