ZigBee 3.0 Pro+ 5 in 1/3 in 1 LED Controller 20A Max RGBCCT/RGBW/RGB/CCT/Dimmer Work with Alexa H*ue Tuya Smart Life APP Control (201p-5 in 1 LED Controller)

I had a TLW vew device (K10-1220z) driving a couple of white kitchen under-cupboard lights connected with a 6 port micro plug connector, that had failed after 4 years of use and didn’t want to replace it as they are expensive, nearly 80 quid. After much research and head scratching at the lack of information out there I purchased the Gledopto 201p. The device doesn’t come with a power supply (inexplicably)) so I purchased this https://www.amazon.co.uk/dp/B0BNH81QB1 (an 24v DC adapter with an 5.5 x 2.1cm jack) and it fitted and worked just fine. I had to connect the micro plug connector to the V+ and C terminals of the controller. And the controller function had to be set to CCT (green light). Once this was done I discovered the device on my Hue bridge/app. All features are working including dimming. I’m very happy and hope this information helps anyone else who has the same challenge.

I’ve been wanting to integrate my kitchen under-cabinet lighting into my Philips Hue setup for ages, but I just couldn't justify the price of the official gradient strips for a space where I can't even see the bulbs. I grabbed this Gledopto Pro+ controller to hook up some generic 24V RGBCCT strips I bought online, and honestly, I’m kicking myself for not doing it sooner. Installation was way easier than I expected. The push terminals are a huge upgrade over the old screw-down style—you just strip the wire, push it in, and it locks solid. No fiddling with tiny screwdrivers while standing on a counter. It paired with my Hue Bridge instantly as an "Extended Color Light," and the response time is identical to my actual Hue bulbs. The color matching is about 95% perfect. The warm whites are super cozy, and the transition between colors is smooth. I did have to press the "Opt" button a few times to cycle it to the right mode (RGBCCT) because the indicator light colors in the manual were a bit small to read, but once I got it on the right setting, it’s been flawless. If you want a pro-level smart home setup without the pro-level price tag, this is the one to get.

works very well with hue app

I use this to power an LED strip in a drawer, it is combined with a door sensor through Home Assistant, so when the drawer is opened, the lights come on. It is pretty easy to use, and the wiring is obvious. Once wired, it is simply a case of pairing it with your Zigbee hub, this was straight forward in HA, just follow your usual method. Once in Home Assistant, you use it like any other device. I find it works well with my simple white strip. Response times are pretty quick. It works well.

Mal reconnu par Home assistant. Sinon Appairage RAS, fonctionne parfaitement en Zigbee 3

Le firmware n'est plus à jour et par conséquent plus compatible avec le pont ZigBee de Philips Hue, dommage... J'ai dû le renvoyer et l'échanger contre une autre marque.