OVERTURE TPU フィラメント 高速 95A 1.75mm 1kg FDM 3Dプリンター用(グラスグリーン)

2度目の購入です。 しっかりと乾燥させれば、綺麗な造形ができます。 扱いやすいので気に入って使用させてもらっています。

TPUは扱いが難しいという事で恐る恐る購入した。設定ファイルもホームページにあるらしいという事で調べてみたら該当するファイルｇあ見当たらない。そこでサポートに問い合わせたら数時間で返事があり事なきを得た。その後数時間でサポートの対応に関する評価メールかきたので星５つを与えた。もちろんフィラメントも無事目的の印刷する事ができ満足している。ホームページを見ているとフィラメント専門のメーカーらしい、バンブーを使っているが、純正は高いので今後はこちらを多用しようと思っている。

初めてTPUを導入しましたが想像以上に楽に使えました つまりや印刷中の不具合もほとんど起きずPLA同様に使えました

Bambu Lab A1 miniで使用してます。他のTPUは保持していませんが、特殊な設定をせずに問題なくボール等を作れました。

TPUは難しいと聞いていましたが、A1miniの標準設定で問題なくできました。

鮮やかなオレンジ色で本当に気に入っています

ゴムとプラスチックの間ぐらいの出来上がりになります。継ぎ目などにバリが出来やすくゴムの特性が邪魔をして取り除くのに一苦労します。引っ張って取り除けないのでカッターで切る事になります。超音波カッターが重宝します。

ゴムっぽい部材を作るため購入。期待どおりに造形できました。

After using this stuff I have to say one thing... WHY IS NORMAL TPU STILL A THING?! Seriously this stuff is revolutionary. It prints BETTER, FASTER, and EASIER than PLA. Seriously I cannot beleive how easy this stuff is to print. It prints fast and easy and with excellent quality and best of all, I cannot tell any difference between a part printed in normal TPU and this speed TPU, and best of all it does not cost much more either. Seriously do not buy normal TPU this stuff is better in every way. Congrats to the material science engineers who developed this stuff. I tell every single person with a 3D printer about this stuff and I am shocked that no one else has even heard of it. Stop using TPU and get this! It is 100% worth the slightly higher price. Your friends will be jealous when you tell them your TPU prints at a MINIMUM of 60 mm/s. Don't hesitate and buy this stuff already and watch all your frusterations with TPU dissapear:)

my first foray into TPU, printed well and easily from my bambu A1

The OVERTURE TPU Filament 1.75mm worked perfectly for printing tires for my model 911. The flexibility is spot-on—not too soft, not too stiff—and it gave the tires a realistic rubber-like feel once printed. Layer adhesion was excellent, and the finished prints came out clean and consistent. It printed smoothly with no clogging or feeding issues, and stringing was minimal with basic TPU settings. The filament stayed flexible after printing and held its shape well, which is exactly what you want for scale tires that need both detail and durability. Overall, this filament exceeded my expectations and was ideal for this kind of application. If you’re printing tires or other flexible parts for scale models, this TPU is a great choice and I would absolutely use it again.

Using Overture TPU has given me a love for the material. Previously, my attempts with TPU had been ho-hum... nothing disastrous, but also way more finicky than PLA. Not so with the Overture TPU! This stuff printed easily and well using Cura default TPU settings (50mm/s, 228 deg end, bed off) on my Ender 3 Pro. Even in a Bowden-tube setup, it works great! Highly recommended!

Give the pink TPU95 a fantastic review, prints very well. Using an ender3 pro with heavy mods, however it does NOT have a direct drive. Printing slow fine detail print, running 225 degrees, .1 layer, 17.5-20 speed, infill @ 35, retraction 7 @ 25. Have to use random seams to get dimensional accuracy and turn down temp by 5 for small layers. I have an older half spool of Overture Orange TPU95 (2023). Even after drying and applying all the new, speeds, feeds and temps to this old filament, it is still garbage, 2 foot prints nice, then next 2 feet will flow 50%, the then next foot will ooze like soft server and harden up like PLA. Looking forward to trying the Overture High Speed TPU as it appears the TPU quality has greatly improved in 2025.