OMOTON Screen Protector Compatible with Surface Pro 7 Plus/Surface Pro 7/Surface Pro 6/ Surface Pro 5/Surface Pro 4 - [Tempered Glass] [High Responsivity] [Scratch Resistant] [High Definition]

Update: 4/18/20 I received a new screen protector and installed it after viewing new video links the rep sent via email. The rep also reached out to me a few times via email just to make sure I received the replacement and that all went well with installation. I appreciated the effort from the seller. This installation process went much better than the first time, the guid fit better and didn't leave particles on the surface. No bubbles and it works great with the surface pen. Would recommend, just be careful with installation!Update: 4/8/20 I am currently waiting on a complimentary replacement for this item. The seller sent helpful information with new video links to help with installation. Their rep who I have been in communication with has shown wonderful customer service! Upping the stars to 3 and hopefully to 5 after I install the screen protector. Again, very pleased with customer service!!Ok, I normally don't do these when it's negative but I was extremely frustrated with this product and installation process. Ichose this screen protector because of the good reviews and affordable price, but was highly disappointed with the installation for the product. It was a recipe for disaster. First, the white guide did not fit good on my surface at all. I had cleaned it perfectly to make sure there was no dust or anything, then as I struggled to get the guide on it (had to force it, and yes I put it on correctly) little plastic pieces flew everywhere. So, I had to use my 2nd dust sticker to remove those. (Both stickers were labeled for dust removal). I had even gone to YouTube and watched the video it had, which was for other tablets and phones and not the same installation process. I couldn't find one for surface pro 7. I finally had the surface cleaned again with the guide on and went to install the protector. It had one side that had to be peeled off and placed on the screen but nothing on the other side. So I'm having to hold this big piece of "glass" with one hand while I peel the sticky part off the other side and then figure out how/where to hold it to place it AND THEN I couldn't get it to fit in the guide. After trying to make it fit, I thought I had it in there good since it had started to stick so I removed the guide to find that it was too far over on the left side and not sticking. I of course tried to gently lift it and it cracked. Now I'm here whining about it and I'm sorry, I wanted to be happy with it but it was just not a smart installation idea. There should have been stickers or another piece on the front to hold it or something while placing it. Not very well thought out.

I had to replace my Surface Pro (5th Generation) for a warranty issue, and my previous screen protector broke as I was removing it. Note - my next comments on related to a competitive product... The former screen protector was not a great quality, but fair enough. I had a client drop the Surface Pen from about 6 inches above the screen. The metal side of the pen landed right at the edge of the screen and broke away a little chip of the former screen protector. It did it's job, but the lack of a bevel on that product probably contributed to it's failure. Regardless, it lasted another year before I tried removing it. At removal, I realized how much I didn't like that product's design. Instead of a large notch like this protector from OMOTION, it had individual hole cutouts for the optical camera, infrared camera and microphone. Since the glass wasn't beveled, it was nearly impossible to remove the dust that inevitably collects at the seams created at the edge of the glass. These are all minor issues, but when you have a device as beautifully engineered as the Surface, it's disappointing when the screen protector noticeably diminishes its visual appeal.Fast forward to this week and I am now installing this new screen protector from OMOTION. The included kit to clean the screen and make a hinge to attach the new tempered glass screen protector were great. I found it helpful to clean a granite countertop and the Surface prior to placing it on the countertop to minimize the potential for dust getting onto the screen during installation. It didn't help that it's the middle of winter, it's dry and static seemed to be at an all-time high at the time, but overall, it was a VERY easy installation. It took a little time to really get the protector lined up just right before attaching the stickers to make the "hinge", but it made the next step of attaching the protector SO EASY.Inevitably, the static created by removing the protective plastic on protector managed to virtually grab an eyelash from me and trap it between the layers of glass. However, it was easy enough to peel away the protector, use the sticker to "grab" that eyelash and then replace the protector. The original installation including the eyelash was bubble-free (with the exception of the eyelash), but the second attempt left a couple of weird bubble-like impressions on the screen. They were only noticeable on screen with the power off, and the instructions said it could take a couple of days to normalize, so I went on with my day. The next morning the odd impressions had resolved themselves. The installation looks perfect.I took time to read many reviews before buying this, so I think it is important to make a couple of comments:1. Ease of Installation... Having done several screen protectors over the years on phones and tablets, I have to say that this was one of the simplest. That was unexpected given that it was also the largest one I've attempted. Follow the instructions EXACTLY and you should have a good result. Remember to clean all sides of your tablet as well as the table where you are working with a damp cloth before starting - that will help minimize the potential for trapping dust. Some comments said that the sticker hinge didn't work. If that was the case, the person didn't do it correctly. It worked flawlessly for me.2. Beveled Edge. I saw a couple of comments that the screen edge wasn't beveled. That is nonsense. I have had one without the bevel, and this is night and day different. This bevel is very well manufactured.3. Loss of Pen sensitivity. I thought about giving this issue enough importance to only award 4 stars instead of 5. However, I think loss of pen sensitivity is to be expected if you place an object between the pen and the OEM screen. It still works, but it's just not as good. To me, it is a trade off. I would rather have the protection than the flawless pen.I would buy this again.

The product arrived late & STS shop was unable to explain the late delivery The price of Rs3925 is also too high.Upon application with a struggle to remove the Air bubbles ( watch Omoton YouTube video for Surface Pro ) & use , I found the touch screen which was earlier sensitive has lost it & I have to press too much to enable function/s with touch be it closing Apps or shutting down or any touch functions for that matter.Not happy as I have always used touch screens before & they always maintained the sensitivity of the screens. Since this is a USA product - No Cust service in India to find out. Might return it

Ich kaufe gerne Omoton Schutzgläser, immer wieder und für verschiedene Geräte. Aus meiner Erfahrung ist die Passform ziemlich optimal und sie haben schon so manche "Spider-App" verhindert. So war es nur logisch, auch für dieses Gerät zu Omoton zu greifen. Aufgrund der Bildschirmgröße gestaltet sich das Anbringen hier ein bisschen tricky, aber wer vorher mit Smartphones geübt hat, sollte auch hier nicht auf ernste Probleme treffen. Oft habe ich bei größeren Folie Luftnester unter der Folie. Dann hebe ich die Folie am Rand nochmal kurz an und schiebe die Blase zum Rand hinaus. Das geht bei diesen Folien meist recht problemlos. Das Zubehör (Nasspads, Trockenpads, Mikrofasertuch, Rakel) klappt hier auch prima. Manche von diesen Sets kommen mit und manche ohne Positionierungshilfe. Beides geht, muss jeder seinen Favoriten finden.

Despues de instalarlo, el touch responde bastante bien, los dedos no se marcan y la instalacion es muy sencilla.Recomendable.

アウトドアで使うことが多いので傷付かず助かっています

La mica viene muy bien empacada y con una guía para la instalación aún así debe colocarse con cuidado. Ya puesta afecta un poco la senisbilidad de la pantalla.