Ravensburger Puzzle Conserver 17954 - Premium Puzzle Glue | Enhanced Glossy Finish | Perfect for 500-1000 Piece Puzzles | Ideal Puzzle Accessory

The instructions say to lay the puzzle out, completed. Then put a coating of this glue stuff over the picture. I did exactly as I was instructed and it worked! I believe the glue works by putting a clear coat of epoxy over the picture, joining the pieces with glue in the cracks. Make sure you are getting glue in the puzzle cracks; I think that is where the epoxy is most needed. I had to go over a couple of spots I missed the first time because when the glue goes on, it really is kind of clear. It dries absolutely clear, but while wet it has a little bit of a white opacity. Because it only takes a reasonably thin layer to do the trick, I missed a couple of spots and had to redo those areas.

Me llego todo bien, excelente producto para lo que necesito

I was cautious about ordering this. I had never glued puzzles before. I did a lot of research about this and other products before ordering. I really wanted to save the butterfly puzzle and hang it up, so I tried this as it looked pretty simple. It was very simple! You have to make sure to rinse the sponge after each use. She. You are doing the front, it's hard to see where you have done already. However, there is a wet looking glisten to watch for. Once you get the hang of it, it's extremely easy. It works great! Even on my son's Angry Bird puzzles which are really thick. I wasn't sure it would work on them, but it did. I will keep this on hand for all our puzzles! I recommend this to anyone. Especially with kids, it's so easy they can do it. Please supervise them though.

My bottle must have been defective. I would only get very little to come out with pumping, which was not enough to fill any gaps. I can hear a lot of liquid in the bottle but sadly barely anything releases on pump. I have tried several coatings with this despite the circumstances and the puzzle never stuck. I originally assumed that perhaps a 2000 piece puzzle might be too weighty of the strength pf the glue but I know realize the issue was just the amount of glue in general. I might look into opening the bottle myself and scraping small coats on without ruining the puzzle

It works just okay. You will need to apply at least two coats. No clear directions on the bottle. What finally worked for me was to squeeze the bottle firmly while pressing the applicator gently down onto the puzzle, forming a pool of glue, then spread it out until there are no more bubbles. Be sure to have paper or cardboard under your puzzle first or you’ll glue it to your table. End product is glued enough that you can transfer over to cardboard or foam board backing material.

The finish on this puzzle is great. Clear transparent coat that does not take anything away from the puzzle. It is great if you are looking for a quick and easy to apply glue for the puzzle. The only issue I saw from this product is that after the glue has set, it does not fully hold all pieces. Some parts of the puzzle had to be re glued and it still did not do the job completely. However with one coat it is possible to frame the puzzle (which was my intention). I definitely would use again.

This product works. How do I know? 1. Puzzle is assembled 2. Puzzle conserver glue is liberally applied 3. Glue dries 4. The kid’s cat takes a nap on puzzle 5. Something startles the cat 6. Cat freaks out and bolts 7. Puzzle flies off the table 8. Puzzle hits the wall 9. Puzzle lands on floor in a balled up heap It held. Seriously. Not a single piece separated. We just picked it up, flattened it out, and that was that. So yeah…this stuff is great. Cats? Not so much.

It is glue with a sponge top. I went over the face of my puzzle multiple times because I didn't adequately get it down all the cracks. Does not damage the surface. Also tried it on the back but surface was too porous. I could definitely do more than one puzzle with one bottle.

Does well, the applicator is good and easy to use but find that puzzle needs more than one coat to completely stick together.

.

Prima volta che utilizzo questo prodotto. Applicazione intuitiva. Con delle pressioni continue si deposita il prodotto e poi con una passata uniforme si stende. Una confezione è stata sufficiente per passare 3 mani in un puzzle da 2000 pezzi. Asciuga velocemente. Dopo un'ora permette di passare la mano successiva. Alla fine delle passate, ad asciugatura completata, le tessere del puzzle si uniscono rimanendo un pezzo unico. La superficie diventa brillante. Ottimo prodotto.

Sí pega muy bien, pero sí hay que dar varias pasadas, ya que con una o dos se fragmenta. Con cuatro pasadas quedó muy bien.

Not sure where or how the negative comments originate from, but this product works really well. Not to offend anyone, but if you find this product not working, then you are not using it correctly. After some hesitation on my own from reading the negatives, I ordered it to try for my self. I found that it worked without a flaw and it was as advertised. I squeezed the bottle properly and somewhat consistently so that there was a good flow coming out onto the puzzle. I looked for it being a steady white liquid appearing on the puzzle surface. I worked the liquid into the puzzle pieces with a smooth circular motion so the cracks would get filled. After that I gently brushed the surface with a vertical path back and forth the entire length of the puzzle to eliminate any stroke marks or uneven spots. It dried to the touch in about half an hour and then the next morning I found it for the most part dry. Maybe a little tacky in some spots but by the end of the day it was 100% dry. I put two coats onto the puzzle and I must say that it looks great. The puzzle is 42 inches tall and I was able to stand it up as one piece. This stuff works great. It goes on super easy. I've done two coats on this large puzzle of nearly 1100 pieces and then another1000 piece with one coat. There is still a good amount in the bottle. Without a doubt, I will buy this again. It will be my go to product for puzzles.