G05D6-HB

This case is great overall, well worth the price when you consider the 6 RGB fans. Pros- -The RGB is really nice, and the fans move a lot more air than I thought they would. -A lot of the reviews complained about the complicated wiring for the fans...but it's literally just one molex plug that powers all 6 fans. The controller is already wired into the fans too...so you don't have to worry about that either. -One of my favorite things about this case, is more about what came with the case, and that's a ton of thumb screws. I have a couple of 8tb hard drives that I was dreading getting installed after I already mounted the PSU and ran all of my wiring, but it was cake with the thumb screws. -The front panel cables are all very long and easy to manage. I also like that they are black to not distract from the look of the case. There's a decent amount of room for cable management behind the case as well. -It's very quiet -Cons -The USB-C port in the front is definitely just a plastic knockout, you'd have to buy and wire it in yourself, except you can't even if you bought one because the RGB button has a right angle coming off it that blocks the port from the underside. -The reset button wire is labeled fan. It's not for a fan, just plug it into your reset pins. -I was given a bunch of extra switches, wires, and header pins...I don't really know if this is a con, but it's just strange as there are no other buttons on the case for them.

I really like this case, I had a full tower for my last case and it was just so heavy. Since I’m getting a desk upgrade soon I want to show off my pc, so I decided to get something much smaller and something that looks good. Went with this since a Corsair lookalike was out of stock. But I definitely don’t regret it, saved me tons of money and looks amazing. On a side note make sure you plan ahead because the last liquid cooler I had on was a bit awkward to get on. So I recommend you take your time and look at those dimensions.

This case was purchased mainly because I wanted the RGB functionality for a decent price. The case is built well in terms of durability. While assembling my hardware, the motherboard was a tight squeeze. I had to put more force on it than I wanted to to get all the screws in. Everything else mounted fine. The RGB functionality comes with pre-programmed sequences, but can be addressed via the header provided. For those who claimed that "their wire burned up" probably plugged it into the wrong headers. It's a 5V rated wire, so if you go any higher you risk it burning up. While you can program the fans with motherboard software, I actually prefer some of the pre-programmed cycles. One concern is the air flow and temperature inside the case. If you plan on doing serious gaming or overclocking, this case may not be for you. My CPU with a stock air cooler from AMD idles a bit high, though I never encountered anything reaching dangerous temperatures (I also don't do too much heavy gaming). A water cooler may be an alternative, or replacing the front glass with a mesh. The top filter is nice since its magnetic, but the frontal design is harder to clean and lets some dust in. I suggest cleaning out the front panel and fans every week or two. Wire management with this case is also a bit of a mess. Overall, it's worth the price. I haven't had any issues so far, and for my purposes the case works wonderfully. Again, if you are looking for performance, you'll likely need a good cooler, or a different case altogether. Even with a bit of difficulty, everything mounted fine with no blatant issues. As long as you keep it clean and organize your wires, its not a bad choice.

To start off... my build: CPU: AMD Ryzen 7 3700X Motherboard: MSI MPG Gaming Edge with Wifi Memory: 16GB DDR4 3200MHz RGB Storage 1: Samsung 500GB M.2 NVME Storage 2: Seagate Barracuda 2TB HDD GPU: NVIDIA GeForce RTX 2070 Super 8GB PSU: 750W 80+ Gold with RGB Case: MUSETEX ATX Mid-tower 903-D6 The RGB Fans 1: The first issue I had with this case was the board in the back where all the RGB fans plugged in (the blue circuit board in the pics). The instructions that come with this case are somewhat garbage. Let me explain... The instructions don't go into enough detail as to how the fan board is suppose to be powered (also, the board layout in the instructions is not the same layout as the actual board). There is a 3-pin ARGB cable that comes out that also splits out into a 3 pin power (see pictures). I wasn't sure the pinout for the 3 pin power so I was very hesitant to plug it in to a fan header for power. That's when I noticed the SATA power cable. Since I was already running power to a SATA HDD, I decided to use one of the power outputs for that cable to power the board (see pictures). I'm not sure if you can actually power the RGB fan board with the 3 pin power and I didn't try. My big complaint here, is that the instructions are unclear. Also, MUSETEX doesn't have a website, so you have to email them if you run in to any issues. RGB Fans 2: Another thing to note is that the RGB fans use the 3 pin ARGB so the the fans are not addressable and you can only change them by pressing the button on the top front. No USB-C: There is a slot for USB-C but its not wired in and the hole is blocked. You can't really put one in for yourself either because the wiring for the front is in the way. Not a big deal for me because my GPU has one. No Company Website: Like I explained above, the instructions for the case components were a bit lacking and there is no website for this company to try to find better instructions. If you run in to any issues, you have to email the company. This is a bit annoying because you can usually self-diagnose issues from an FAQ page. In the end, I figured out all my issues on my own and didn't need to email the company. The say they will respond within 8 hours but I can't really comment on the speed and quality of their customer service since I didn't need it in the end. HDD slot: This isn't a complaint, it's just something to note. You have to remove the front bottom fan to screw in the HDD (see pictures). Not a big deal, just something to note. This case also does not come with HDD disk trays. This wasn't a big deal to me because I I could just screw in the HDD directly, but to remove the HDD, I will have to take out the front lower fan. Front Panel Side Bumpers: The front glass panel comes with two side bumpers (see pictures) but they don't stay on at all once you take off the plastic film. It's not that big of a deal to me, but it is very annoying. Sticker on the Front Panel: I hate the damn sticker on the front panel. It's cheap so the glue stays behind when you peel it off and I had to go get some Goo Gone to get rid of it. Not a big deal overall, but a major annoyance. Overall, I happy with this case, but I did have to knock of a half star for the few issues I ran in to (see above). The RGB fans look great and they are very quite.

Eigentlich ist es das was ich erwartet hatte. Leider jedoch Qualitativ recht schlecht. Für den Originalpreis, ich hab es im Warehouse erworben, erwartet man mehr. Das Hauptproblem sind hier die verbauten Lüfter. Diese stellen je nach Belieben die Funktion manchmal ein. Ohne erkennbaren Grund. Ab und zu keine Beleuchtung oder Einer dreht einfach nicht. Naja. Für mich ist diese Marke nicht zu Empfehlen.

Très bon boitier Très beau Facile a travailler Bonne ventilation Bonne filtration

Good quality case, easy to open and gain access to complete install with room to spare :). Well and truly enough air flow with all the fans and vents. RGB lighted fans work well and look good.

Gorgeous case and love the fans and colors and super easy to use and assemble even for beginners

Nice case, looks very nice...but the images are misleading. There is no place for fans on the top, if you use a ATX motherboard. I tried to move the 3 fans to the bottom and install an 240mm MasterColler AIO the top...no way. The cables from the frontpanel also are disturbing the assembly of the AIO on the top. If you just put a CPU FAN...it's a really nice and beautiful case.