Barrina T8 LED Shop Lights 8FT, 72W 10000LM 5000K, High Output Tube 6 Packs

Exactly what I was looking for. Installation was straightforward and I was able to get everything installed and working in an afternoon without any major issues. The biggest difference is the amount of light. My garage is considerably brighter now, and it's made the space much more pleasant and practical to use. I had been wanting better lighting for a while, and these did exactly what I needed. Very happy with the purchase and would definitely buy these again.

Bright easy to install the clips are great I installed them above my lathe are bright and give great light as I work

The ballast went out in one of the five 16-year-old fluorescent fixtures in my basement workshop, so I decided it was time to upgrade the lighting for that whole section of the shop, and after reading reviews and conferring with a few folks who've already gone through this effort I chose this 6-pack of LED fixtures. I wanted 5000K color temperature because I think it's perfect for woodworking (my fluorescents were 5000k also). The manufacturer rates these at 5500 lumens ... I'm always skeptical of such ratings, but I wanted at least as much light as I had previously. These are 40W fixtures, so 6 fixtures x 40W = 240W total, which compares favorably from a power draw perspective to the 32W x 2 bulbs per fixture x 5 fixtures = 320W I was using before. The 80W difference isn't enough difference for a big ROI (about 7000 hrs to break even at $0.13 / kWh), but at least it's less than before and I'm getting slightly better coverage due to the additional fixture. The provided wiring kit is excellent, allowing for many different configurations ... individual plug in (with integrated switch) ... individual hard-wire ... daisy chain in a solid line (head to tail) ... daisy chain using pre-made pigtails ... or any combination of those. I used the small adapter to connect two lights (#2 and #3 in the third pic) head-to-tail, and used the plug-ins for the others because I already had outlets in the ceiling from my previous installation. Physical installation options are limited, however. Two surface-mount clips are provided for each fixture, which do a very good job of securing the fixtures on a flat surface, but if you want to suspend the fixtures you'll have to get creative because they are extremely lightweight and no suspension hardware is included. After playing with possible mounting locations, I was fortunate to find locations on the ceiling for 5 of the 6 fixtures that would provide lighting in the desired areas without causing harsh shadows from the duct work running down the middle of the shop ceiling. But I needed to drop one of the fixtures (#4 in the third pic) below the duct to properly illuminate the workbench below, so I used pocket screws to secure a couple of 2x4 scraps to the joists and mounted the fixture to the ends of the 2x4s (see second pic). The overall light provided is excellent, a good bit brighter than my old fluorescents (which likely had gradually gotten dimmer over the years). As you likely know, this is very difficult to show in photos ... photo #1 shows one of the LED fixtures next to one of the fluorescent fixtures, and maybe you can get a sense that the single LED tube is at least as bright as the dual-tube fixture next to it. My only real gripe about this lights: there are no diffusers over the LEDs so the light is very harsh (which you can sort of see in the pics) and throws sharp shadows. As such, you'll want to consider that when positioning them if shadows over your work bench (or wherever) are a concern. Overall, I'd give these maybe 4.5 - 4.7 because of the lack of any diffusion, but for the price and ease / flexibility of installation I think they're a very good value and I recommend them. Now I just hope they'll last for at least several years.

I have a 3000 sqft automotive workshop that was lit with sixteen 8 foot double row fluorescent tube lights (32 tubes in all) about 15 feet above the floor. They were over 20 years old and half wouldn't come on when it was raining or real high humidity. I bought two sets of these for a total of 24 and the improvement is almost impossible to describe. Bright Bright no shadows, cool white light that come on instantly not a couple seconds after hitting the switch regardless of the weather. Totally changed my shop. Oh yeah, also a very noticeable decrease in my electric bill.

This is the 4th or 5th order of these Barrina units. Overall, very good product. I have them the 4 stars because they do burn out after some time of use. These particular one's have not been used yet, but be aware the ends to connect them are different at one end, unlike past Barrina units that were similar for daisy chaining. I do notice that the newest order shows they are both InterTek and UL approved. Previous one's did not show UL approved, so that may have been part of the issues. I learned to put a date on the back of them so I know when I put them in service so I can see how long a single tube lasts. I do have them in lengths of 4 units in the garage. So could it be the vibration of the garage door opening and closing? Could it be hot and cold weather? Don't know. But for the price, I will continue to replace individual one's that burn out every 5-8 months or so. Last note for woodworkers, the 5000K temp is the optimum color range for woodworkers, not cold white, or warm white... the 5000K is what is always recommended. And they are bright !

The front of my garage has a dark area, not well lit , because of the 16' door and no clearance for regular hanging shop lights. When the door is open it's fine but not when closed. I ordered the 6 pack of lights and used 4 of them with 2 as spares since some reviews say they don't last long. What else is new ? None of the leds I have seem to last as long as 'they' say they will. Anyway, I mounted them 4' apart on the roof trusses above door and used 3 clips each as some people said the clips seemed flimsy but I don't think they are and could have used 2 clips per light. The connecting wires between lights is way too short and not 4 ' so I cut one in half and a connector off one other and spliced them together. They give you plenty of wiring in this set, one for each led strip, even if it is too short along with 6 really short stubbies to wire straight to electrical box which went right into the trash. The project turned out great , plenty of BRIGHT light. I wired them to a switched outlet and don't plan on using them every time I'm in the shop SO hopefully they'll last when I do need that extra light up front. I looked at other options like those hexagon things and modifying the mounting on big box store led shop lights but I chose this and am happy with it. The install was great but it would have been nice to have longer between light wiring in the box.

Go these for our unfinished 1/2 story - 2nd story in our barndo. We will eventually finish it but wanted lights that go be for now or later. For the price of the lights and the amount you get, I'm very happy with them. 4 light up an open space of about 1,200 square foot very adequately, ceiling peak at about 10 foot with a 3/12 roof pitch. Slim and overall appealing to the eye. They were very easy to install and the connectors make it very simple to connect all lights, or just a couple lights. Temperature color of the lights is a traditional LED, almost a mix between cool and warm. They are not too heavy duty and the quality seems to be good so far.

Very Bright. 5000K daylight whiteness brightened my 2-car garage tremendously. Easy to install on garage ceiling. Various cord connection options are nice. BUT 4 out of the 6 units lasted less than 5 years. They each started to flicker (several LED chips) then eventually the entire unit would fail. 4 units failed within 2 months of each other. This is a rather short lifetime compared with traditional LED bulbs. I'm now trying a different brand.

These lights are fantastic! Really elevated the look and brightness of my garage, it was literally a night vs day difference. 6 x 8ft T8 led

Good lighting and Colour

In a nutshell - These lights offer an affordable, powerful, easy and energy-efficient lighting solution, especially well-suited for spaces like garages, workshops, and sheds. With straightforward assembly and a high lumen output, these lights are an economical, practical choice for many indoor applications. However, there are a few minor drawbacks that you should consider. Further details.. Each light produces 5000 lumens, has a wide 270-degree angle, and consumes only 40W of power, making it a cost-effective and more durable alternative to traditional fluorescent tubes. They’re also very easy to assemble/install. The lights come with all necessary accessories, including power cords with on/off switches, hardwiring options, and connecting cables that allow for up to six lights to be linked in series. This reduces installation time and effort, making the setup process smooth and hassle-free. They also include some connections with wire splices to make a longer cord, which I did to span the width of my shed so I could link 3 lights on either side with each other. While the lights themselves are fairly sturdy, especially compared to traditional fluorescent tubes, some care should be taken to ensure you don’t bend or twist them overtly, which could break them. Feature Summary Brightness: 5000 lumens per light Power Consumption: 40W per unit Beam Angle: 270 degrees Installation Options: Hardwiring and power cord with on/off switch Connectivity: Easily link up to 6 lights in series Included Accessories: Power cords, hardwiring kits, connecting cables, small connectors, installation manual Final Thoughts Overall, the Barrina LED Shop Light is a reliable, bright, and energy-efficient option that offers excellent value for its price. Its ease of assembly and versatility make it a great choice for various indoor lighting needs. I used them to light up my large tent shed, and it now looks great - day or night, and only took me under 30 minutes to get it all setup. If you need an affordable, easy lighting solution, these LED shop lights are definitely worth considering. They also go on sale occasionally. I was able to pick up a six pack on sale for $99.99 (29% savings) which worked out to $16.67/light which is a great deal!

Éclairage des lieux de travail

Previously had florescent bulbs in the garage and they simply didn’t provide enough lighting. Bought these for their cheap price and so far I have been very pleased with them. They are very bright, 5k is the perfect color temperature.. not too blue not too yellow, almost like real daylight. They’re nice and lightweight which means installing them is an easy 1 man job. The lights are very slightly under 8 feet and the cables are slightly shorter than advertised as well but that’s not really an issue. Originally I had these plugged into power, but recently I hard wired all of them. Had to buy T5 extension cables here on amazon that were 10 feet, but they worked with this product just fine. Brown is live wire, blue is neutral, green/yellow is ground.