VIVO Single Monitor Arm Desk Mount, Holds Screens up to 32 inch Regular and 38 inch Ultrawide, Fully Adjustable Stand with C-Clamp and Grommet Base, VESA 75x75mm or 100x100mm, Black, STAND-V001

Amazing. Instructions were clear and easy to follow, and the item was simple to install. Works great for my monitor.

Very high quality been using for a month now and it's still standing. It hold my monitor very well. It looks good and clean. It is a very easy product to install. The value for money is insane. Very worth it. You can move it around pretty easily and it's pretty flexible. And it functions better than what it is worth.

If you are the type considering putting two 27inch monitor on top of each other. This is the best item for you. 1. A 27inch monitor is on top and I still have two hand length of space before it reaches the tip top. 2. monitor is safely adjusted to my liking, the length of the hand where you put the monitor is actually an arms length, which means you can play with it however you like. 3. Each parts that was given to you is all on the instruction, there are no spare parts, so please do not lose a screw. 4. Quality is actually not bad, its your cheap and standard monitor stand. Its iron and this should last you a long time without bending like beckham. I promise 5. I'm very happy with this product. The only issue i have is that on setup my wrist is damn tired. Be prepared for manual labour, please do this on a weekend and be safe. 1 star off because of the strength needed to adjust your monitor. Not how hard to set it up but to screw and unscrew all the adjustable parts for your likings. Size comparison: give or take half of your door, maybe 3 inches above halfway, something like that. and no please don't be dirty minded.

I don’t normally do reviews but, this thing is so well made and strong! The clamp that holds it to the desk is a beast! It holds the pole in place and stays absolutely sold!! Love it guys. What a fantastic product!

easy to assemble and install, though the range of movement on the arms could be slightly wider, a proper join in the mid point (i.e. a double joint) would be better. that said assembly took a few minutes, the instructions are good. using the clamp attachment here, it also comes with a plate suitable to mount by drilling through the desk which is a nice touch. includes the fittings to attach to the monitor VESA mount, this is a sensible quick release design so the mounting plate can be fitted to the monitor before adding it to the stand. once installed the design seems sturdy, though note this is intended to hold a monitor in a single location, if you want to be able to swing it back out of the way you will need something else or to fit a collar to the post as the joints are designed to be fitted tight. the post and the arm come with cable clips with is good and avoids needing tie wraps. this has allowed adding a second monitor to a desk without taking up space on the desk itself. the feel is quite heavy with metal construction and it feels robust, currently using with a 24" LCD panel which while not heavy is being held securely

I bought this to replace an existing arm as I upgraded to a 34" wide screen monitor. Sadly I'm regretting this decision already as there are many negatives to this, both in design and functionality. This mount can be installed as either a clamp or grommet, I initially chose grommet because my desk has a cable hole in it however after installation I felt the monitor was too close to me so I decided to change it to the clamp. The clamp itself is very robust, however the two screws on the back of the clamp that hold the two sections of the clamp together are impossible to release, even though the clamp seems to be adjustable. That aside, I tried to mount it to the desk but the handle for tightening the clamp is so big that it interferes with the modestly panel at the back of my desk making it impossible to get the clamp all the way up against the edge of the desk. There is a design fault in the clamp mechanism, I think one of the other reviewers had theirs break completely, but the clamp uses a plastic, yes plastic washer between the clamp screw and the clamp plate. Fortunately for me, when the mount collapsed, the washer did not break, but if the monitor had been installed at the time then I suspect the whole thing would have gone over. This needs replacing with a metal one urgently in my opinion. Having finally got the mount installed, with the clamp connected the best it could and the monitor attached, it's disappointing that the monitor feels so low. Even though I've got the arm almost at the top of the pole it just isn't high enough. Added to that and despite positioning and tightening the screw as hard as possible, the monitor has a forward tilt, even though the monitor is within the parameters of the mount both for size and weight. I'm really disappointed in this, the only decent thing about it is the fact that it has some cable clips and the clamp is robust but other than that it's quite a let down. That aside, it has design issues that could easily be rectified to make it an easier and safer installation. As it stands, I'm likely to use this for something else and have put my monitor on it's original stand as I just don't trust this to do it's job.

After much research I decided on this. It is e xactly what I wanted for my 27 inch HP monitor. Easy to install with great build quality and pushes back against the wall for PC viewing and swings out for using as a TV monitor from another part of the room. Multiple positions catered for. Highly recommended.

I got this for a 34" flat ultrawide screen. The manufacturer says this mount can hold up to 38" UW, so I was fairly confident my screen would be no issue for it. And, well, it isn't really an issue per se, but the monitor wobbles a lot. A LOT. It doesn't matter how much we tighten the clamp, with two or three people participating - one for holding the monitor, another for keeping the arm straight and one other for tightening the clamp-, it always tilts due to the weight of the monitor (mount claims it can hold up to 9.98kg, monitor weighs ~7kg without original arm). I could barely type anything without it shaking. My solution was to put a small statue against the other end of the monitor so it could support it alongside the mount. It looks kind of cool and the wobble is gone, but it sucks that I need to keep it there to have a normal setup. Several people (on Reddit) have mentioned that it's a problem with the joints of the mount not being tight enough, whereas others claimed it's a wonky desk... The fact that the statue completely removed the wobble makes me think it's a mount problem, not a desk one. Anyway. The mount allows you to change the height of the monitor, but I wish I could raise it even further than I did. A 38" UW might be too low to be used comfortably. All in all, it's 3 stars. Good build quality, sleek design, just not sturdy enough.

Affordable and sturdy. Make sure you tighten the bolts around the arm extremely tight for heavy monitors so that they don't sag though.

terrible, came broken, literally made me cry

Would Buy Again - Really easy to build and is very stable. Only slight complaint is how on my 24 inch monitor, the back VESA mount rattles a bit when moving it due to the thumb screws not going in the full distance, but i believe it's the monitors issue, and not the screws. The arm has very smooth movement and the included cable clips really tidy up the space and they are a great addition. Highly recommend this for Dual/Trio/Quad Monitor Setups on Secondary Monitors!

I picked this mount up for my new 32-inch gaming monitor around two weeks ago. The mount has been very stable and leaves my desktop clear, which is awesome. Resists shaking very well compared to other monitor arms that I have used in the past. Breakdown: - No sagging and very stable arm - The height is perfect and works well with my adjustable desk. Great for standing desks. - Adjustability is great. Has a very decent range of motion. The height adjustment requires an Allen wrench (included), but it leaves the monitor feeling very secure - Expandable. While it only comes with one arm, there's plenty of room to expand in the future, which is perfect if you want monitors stacked on top of each other. - Easy installation, that takes no more than a few minutes. - The price is fair for what you get. I picked this up for $40 and it is money well spent. Overall, it's hard to go wrong with this great desk mount. I'll update the review later down the road if any issues arise.

działa dobrze z monitorem lg-38wn95cp-w mogłoby być wyższe o 10cm