BETOOLL Fuel Pressure Test Kit 0-100PSI with 9.49,7.89,6.30 Fuel Line Fittings

Tester was just what I needed, came in quickly, seemed good quality and had the adapter that was not included with my older more expensive kit. Seems accurate with the rating of the new pump I installed. No leaks. And was a good deal. I didn’t need the gauge, but the whole kit cost less than buying the fittings separately.

Great tool ata great price. It connected to my Polaris 570 fuel system and read the fuel pressure which was found to be correct. It is hard to get the quick release to remove the tool from the fuel lines and had to use an extension to get the releawse to actuate, but I am older and dont have the strength I used to, but it is valuable to any mechanic working on fuel systems.

This is a solid addition to your DIY toolbox, if you own any vehicle using quick connect fuel pressure lines. No leaks, pressure gauge is accurate, and has three different size fittings. 5 stars

This tool works for in-line pressure testing only. Not able to check deadhead pump pressure. An extra adapter would be required to do that.

Worked great for an inexpensive fuel pressure tester. I purchased it for the 1/4 fitting thats included. Most testers dont include that size. I used it on a 2010 honda trx420 quad. It found that the fuel pump was failing.

Works great, and fits 3 different sizes.

Works great for what I needed different nipples makes it easy to use with different sizes. Easy to carry and keep organized

Unfortunately I needed to test fuel pressure in a Chrysler 300. The problem is the hoses are made for AIR and WATER not gasoline. They should be rated at FUEL INJECTION hose specifications. They did remove the section where it shows air/water which they previously left in as others have seen and shown pictures. The other major problem is the quick disconnect connector broke the first time trying to use it. It had a hairline crack and was spraying fuel everywhere. Tried to disconnect and it broke. Absolutely the worst quality I have seen. Harbor freight is about 25x better than this. These are just cheap China made garbage. Another major issue with this kit, it can't be used to properly test fuel pressure. On most setups you either have a valve on either side of the gauge T, or you simply use hose pliers and pinch off one side. This way you can isolate the fuel pump but leave the fuel gauge and injectors in to test bleed down of injectors. Then you can clamp between injector and gauge side, to test bleed down of the fuel pump. This gauge would not work for this type of test. It will only give you very basic fuel pressure testing capability. Very disgusted with this garbage.

Easy to use and inexpensive. Recommend.

I got this gauge to diagnose a low power, hard to start condition on my van. I already have a gauge but it is designed to either thread to a Schrader valve or hook into a hose with barbed tees and clamps. This one did what I needed. I disconnected the 5/16 quick connect from the metal line to the nylon line and put the adapter between. It showed that I had low pressure at start and took a long time to build to spec pressure. Once I changed the pump, I retested and the gauge went to 50 psi running immediately. The bleed valve allowed me to release the pressure and disconnect with minimal mess.

The tools arrived on time, works perfectly for most polaris models, has all sizes of quick connector for other brands, the gauge work accurately exactly the same reading with our yamaha fuel pressure tester, hope it would last longer.

Very helpful tool for connecting in line on quick connect setups, mine has been used on a few hyundai's and it works very well.

Très bon produit, cependant j'aurais aimé que le tuyau soit plus long ou au moins avoir un tuyau de rallonge. Pour faire un test sur la route ce n'est pas évident de voir le cadran lorsqu'il est sous le capot. Mon problème se situait quand j'accelerais, donc pas évident surtout que le problème ne se manifestait pas en accélérant à l'arrêt.