5 Inch TFT LCD Car Color Rear View Monitor Screen for Parking Rear View Backup Camera with 2 Optional Bracket(Suckers Mount and Normal Adhesive Stand)

Display is exactly as described. Used a 12 VDC 1.5 A power supply from a small Netgear switch for power during testing. Paired it with a cheap $20 NTSC backup camera. Immediately worked when powered. Pointed the camera out my window and towards the street. The picture in the display is much better than expected. Adjustments for language, brightness, contrast, and hue seem to work as well as they need to. I plan on mounting the camera on my car so I can see a curb before driving into it when I'm parking. My car is lowered and has a front splitter, so this is an issue. The camera was purchased separately. The display will be attached to the center area of the windshield. I've had it plugged in and running now for more than two full hours. So far so good. Next test is when I get it installed in my car. This box the display comes in says it will take 9V to 36V DC input power. This is nice for a number of applications. The display is not spec'd to work with a standard USB at 5VDC power source. It will however, work well with the 12 VDC power from a cigarette lighter style plug in your car.

Nice little monitor that works fine so far.

Paired this monitor with the RAAYOO L002 camera. Super bright at night, very clear and crisp video. The monitor instantly turns on when switched to reverse, which is very nice to have no latency issues. Screen has some strange refresh lines, but that may be the cheap camera I bought to pair it with. Still easily viewable. This monitor only runs off direct current, which means it will not work plugged into a cigarette lighter or USB port. It must be tapped into your fuse panel, spliced into your reverse light wires, or connected straight to the battery. It does not come with a fuse tap or a fuse on the positive wire, which I would heavily recommend. Only an automatic transmission issue but when going from park to drive the monitor tries to send out a video signal when the gear selctor passes through reverse, which causes radio interference. One thing is when the monitor is just turned on or switched from reverse to a different gear the "no signal" screen is a very bright blue, which is annoying at night. Fortunately, the screen goes black after 2-3 seconds.

The 5" Pardarsey Colour Monitor, fed by the composite video output from my Yamaha keyboard, fits nicely above the failed LCD display module that it replaces. The brightness, contrast and picture quality are quite adequate for this application. This has restored the functionality of the keyboard by enabling the player to select the various options displayed by this complex instrument... at a very reasonable cost.

The screen does what ist is supposed to do and it works well with a generic backup camera. The mount is pretty lame. The ball and socket part quickly get loose, leaving the screen flopping about.

For the price on those little thing I wasn't expecting much but I didn't need much. Surfaces to say when I open the package took it out examined it hooked it up and have now used it for quite a few hours and days I love it hopefully it'll last we'll see. You can't beat it for the price so if it fits your needs I say go for it.

This monitor is definitely not high definition. It’s susceptible to interference even when wired correctly. The mount allows excessive vibration but not enough range of adjustment. Viewing angle must be dead straight on or the image darkens. Worst is it just went blank after 20 minutes during first drive, did the same after only 10 minutes on the second drive. The one I got 12 years ago for about the same price was far better, this is junk.

El tamaño del monitor y la buena imagen que se ve a través de él, es muy util y práctica para lo que necesito, el funcionamiento e instalación son bastante fáciles, en mi caso por ejemplo, lo uso para poder visualizar los titulos de las canciones en mp3, lo he conectado a un reproductor de DVD y se me hace muy practico para seleccionar la canción que quiero escuchar. Además lo puedo trasladar si es necesario a otro lugar. Un monitor grande no tiene la misma versatilidad.

light and easy fixing and fast shipping

Easily fitted and is compatible with the camera. Works well.

Perfect screen, uses the front with a switch. I wish I didn't get a mirror image...when I drive, the screen shows that I have traffic on the right side of the car. But the point is to see better when I park against a railing or a wall.

I bought this to add reverse camera to base trim 2013 Hyundai Accent and it works quite nicely. The packaging was minimal so I appreciate the fact that no extra waste after installation is done. The included cables were long and useful. Especially the yellow RCA cable was very long and I had good routing options for a tidy look. The screen turns on quick enough when it gets 12v (my reverse light switch) and quite bright. The resolution seems be to decent enough to make out all the objects behind the car. Couple downsides: First, the adhesive is really weak. It kept coming off from the dash, so I had to remove the original adhesive and install a more heavy duty outdoor rated double-sided tape. Secondly, the power cables were quite fragile to work with. The core of the cords were very thin and I was losing strands as I was installing the ground wire to a metal interior screw. Overall, it does the job adequately well. Especially at the price that I paid for. Maybe recommended if you are a careful person since the material seem a little fragile.

Grest monitor works well