Cumbor 30-46" Baby Gate for Stairs, Auto Close Dog Gate for Doorways White

We are using this currently as a dog gate.Eventually it will be used a few steps down for a baby gate. That is what is so great about this gate. We have metal stair railing leading upstairs. We use the wall on one side and a 1” square post on the other. There are V shaped clamps for the rail side and round pressure grips on the other. It is versatile and can be switched later when we change to a baby gate with our grandson. The gate seems very sturdy and stays in place when jumped on. Another huge plus is that it will stay open when you need to leave it open and need your older dog to go up the stairs in the middle of the night and is self closing once it gets to a certain point when you need to shut it quick because the puppy is charging towards you. It latches well when shut. We are very happy with this well made gate.It is adjustable for width and easy to assemble as well as looks good.

Once we got the measurements and read the first page or two of the instruction manual, we had no problem installing the gate. It was super easy, easier than I even anticipated. Just want to stress the importance of not messing with the tightening once you’ve cut the red zip tie that has a sign that says do not cut until after install. It messes with the way the gate shuts. Make sure it’s secure, cut the red zip tie and don’t mess with it. It works beautifully. I’m so happy with it. Easily worth the money. We’re getting at least 3 more because we have 3 levels of our home and 2 sets of stairs so we’ll have a total of 4 gates. We simply used the pressure based install rather than the screws because our home is newly renovated and we don’t want to mess up the walls and the brand new banisters. It’s insane how sturdy this baby gate is. I’m thoroughly impressed and I absolutely love how nice it looks. 10 out of 10 recommend.UPDATE:::This update has everything to do with having to remove the gate and then reinstall it. I genuinely believed once you install the gate (using the pressure mounts only) that it absolutely could not be removed and reinstalled. Boy was I wrong. Yes, the initial instructions say not to cut the big red zip tie until you’ve finished the installation, but it’s not as scary as they make it seem. You can literally remove this gate however many times you need to and then reinstall it just fine. The one thing you will need, however, is heavy duty zip ties (or multiple regular but elongated zip ties). Which we had because we had been in the process of moving . Because we moved into our newly renovated home very recently from a super tiny 2 bedroom apartment, we had to buy a lot of new furniture. I was concerned about the fact that we wouldn’t be able to reinstall the baby gates if we had to remove them and we were fully prepared to just chuck these in that case and buy 2 new gates. I mean, what the heck are you supposed to do with a toddler running around? Just not put in a gate because it’s gonna get in the way 3 weeks later when the furniture is delivered??? Of course not. What happens when you remove the pressure from the pressure mounts is that the door part of the gate basically separates and your first instinct is to panic. Which is exactly what I did. But fear not, for I have the answer! You’re absolutely going to need to use some brute force and some sort of zip tie, be it heavy duty or just basic, but what you need with the zip tie is to simply “scrunch” it to the point you can get the gate back into the place you had it installed initially. For us, we had them at the top and bottom of our staircase. As long as it fits, all you have to do is reinstall it like you did the first time. And I did this for the bottom and top of our staircase. Once you get the gate to fit through the space you needed it to fit into, you just keep spinning the little black piece around the screw on both sides and both top and bottom until it’s back into place and BAM it works just like it did before. Because of this, I am an even bigger fan of these gates. They look amazing they function perfectly and you can remove them over and over if necessary. Freaking awesome.Again, this is only for the pressure mount option. I have no idea if this works for the permanent screw mount.

Very well made, sturdy, firm safety gate. The first to test it without asking was the one-year old grandson and it passed the test with flying colors. We also got it so the 15-year old, six-pound Shorky wouldn’t use the stairs.The great thing about this safety gate is you don’t have to screw it into the trim or bannister. I was a bit worried at the beginning because the Wall Cup wasn’t flush against the quarter-round around the bottom of the square bannister. However, I was able to place it just above the quarter-round, as my pictures show. The Wall Cup on the lower right isn’t totally flush against the slightly curved trim, but it fits and is firm and sturdy. I used the Up Cups for the top left against the bannister and the top right against the slightly curved trim.Oh, and make sure you don’t cut the small wire rope by the cardboard square at the latch or the red zip tie below it until done installing.Technically, I don’t believe you have to leave the ramp (which helps hold up the gate during installation), but in my case I liked the small boost it gave to go above the quarter-round on the left so I left it. Plus, it helps sturdy the safety gate and looks like it belongs.Very impressed with this safety gate and wish we had installed it a long time ago.

I was impressed by both the quality of this gate in terms of the gate construction itself, and the completeness of the installation package. It included a number of very useful items: (1) a "foot" to hold the gate upright while installing it, which makes measuring and selecting the installation location much easier, (2) multiple fastening options including hardware (to screw the mounting pads into walls), friction, adhesive, a set of wider spacers for accommodating baseboards, and a special angle adapter for locking into banisters when no other option is available, (3) a template for drilling holes when using screws, and (4) easy selection of multiple gate widths for various installation scenarios. The instructions are clear and easy to follow, and the gate is very solid and secure. The locking mechanism itself is also unique, it requires both a thumb-press and a lift to release the gate, preventing accidental opening if, for example, a child leans or hangs on the gate, and the gate has a spring-loaded automatic closure. Highly recommended for home safety!

Excellent quality and is performing very well. Easy to assemble and adjust and the door is very reliable. The unit itself is a 5-star!!My issue was that it comes with assembly warnings on both sides of the handle and one that goes from the top to the bottom of the door frame. Even with a razor blade a goo-gone, they are impossible to remove without dulling or damaging the finish! And removing them- it took literally twice as long as unpacking and assembling the gate! I went from satisfied to really irritated.The stickers are assembly warnings- so they are not intended to be permanent. Change the adhesive so that’s true- then you have a 5-star for sure.

Excellent customer service. When I lost a clamp, I sent an email and received a response less than 12 hrs! They took care of my problem (was my fault bc I lost the part). The gate was the perfect size and easy to set up with great instructions! The gate works great, keeps pets out of kitchen and is very sturdy! The fact it is black matches my kitchen perfectly too!

These gates are amazing. I had to get ones wide enough for a walker to get through and tall enough to reach and these are perfect. They were so easy to install and don’t budge on my walls with just the stoppers, I can’t mount them because I rent. They are both in entrance/exits off the kitchen so they get used A LOT. I’ve been using them for just less than a year and have only had to tighten them up once. I highly recommend these gates.

Great gates, opens both ways and they have a self-latching feature, which makes them very convenient when you have your hands full with a baby.I decided to move one of the gates to a different location and needed an extra extension piece for the length. I contacted the seller. They were incredibly helpful and very responsive!The gate itself is sturdy, easy to use, and gives me peace of mind with my little one. Can't recommend them enough!