Honeywell Ademco 5816WMWH White Door/Window Transmitter w/Magnet

I installed this sensor on my detached garage (walk thru) door and programmed it on a 6160RF keypad. It was fairly easy after watching a few YouTube videos. I ran into one major snag though. When I finished, it wouldn't work. It kept giving me an error. Come to find out after much research, the cover has to be on it during programming. The sensor knows if the cover is off and thinks someone is trying to disable it. Aside from that, not too bad. It works well.

I bought a couple of these as add-ons for my existing ADT system, which was all-wireless. I didn't get the chance to install them before I moved, but luckily these items were also compatible with the hard-wired system that was installed in my new house. I have them installed on both panels of a double-door for extra security. I gave them to the technician, and he installed them for no additional charge. If I had bought them directly from him it would have added $80 to my bill for each one. You might get lucky and have a flexible installer like I did, or you may be able to call your current ADT provider for technical support with installation on your own. I didn't put these on myself, but I wouldn't hesitate to tackle the job, as the technician had them installed and connected in about 5 mins. As far as I can tell these transmitters are easy to install and work with most ADT systems on the market today. And you can't beat the price, especially compared to the retail (or even discounted) rates the ADT installer would charge. I cannot guarantee it will work with your specific system, especially if it is more than ~5 years old, but I wouldn't hesitate to buy them again myself. Shipping and packaging was good too.

Very easy to install and program—just follow the instructions on YouTube.

Works well, not so easy to install do.

I bought this to replace a faulty sensor on my ADT Quick Connect system. Of course, ADT wanted $100+ to send a guy out to punch in the code to activate the new sensor.I asked them to give me instructions on how to setup the new sensor and they refused (because according to them, they have to supply me with one, so they can charge me double or triple what this honeywell 5816 is worth) So this is what you do to replace a sensor. go to http://intellahome.com/alarmpdfs/lynxplusinstall.pdf and download and print this manual. It applies exactly to the quick connect system Then go to your security panel and punch 6321 800 (you should see programming menu on screen..if you do not, stop as your configuration may be different) * (now you should have a blank screen) *56 (this will put you on the zone configuration menu) then type the 2 digit zone number you need to modify Then follow pages 38-41 on the instruction manual Basically you have to delete the serial number of your existing zone, then place the menu on autolearn, and with this new sensor (the lid and battery has to be on) place the magnet on the side of the sensor, You will hear 1 beep. Take the magnet away for a few seconds, and then place it against the sensor again, you will hear a 2nd beep and the serial information will be filled automatically on the screen. Keep pressing * until you get to the next zone #, then press 00 * 99 to exit FYI, this sensor has to be setup in the following configuration on the Quick connect Zone type = 03 (perimeter) should show B03 on screen Report Code = 10 (should show C10 on screen) Input type = 3 (should show D3) If system asks for LOOP NUMBER, use 2 (for the magnet type) or 1 (for the wired type)

our 14-year old alarm sensors are starting to fail... one by one, they trigger the alarm to go off at random times. Rather than having the alarm company come out for $100 per visit, plus the cost of the parts... I just buy these as needed and switch them out. Search youtube for videos with step by step instructions for removing the old sensor and installing the new one in the alarm system. Now that I know how to do it, it takes minutes to replace them. I've replaced 3 so far, and anticipate needing to do more as they continue to fail. Very happy with these so far!

Works exactly as I expected. Easy to program and configure with my system. Excellent option when we replaced our entry doors and the installation company cut the wires from the old sensors

We have an older ADT 3000EN system with a 5882 receiver. One of our wireless perimeter sensors was intermittently going off, waking us up in the middle of the night and signaling the PD. I didn't think I could get a replacement sensor and was going to permanently disable the faulty one. I came across this one on Amazon. It looked identical and replaced the old one perfectly. I was a little intimidated to install it because of the programming, but if you review on-line articles and the ADT installer's manual it is straight-forward. Took about 20 minutes to install and program. If you are not comfortable doing this, then better to pay a pro as there are opportunities to mess up. I liked this so much that I decided to order a second one to have around as a spare.

Seguridad de cada Excelente producto

Easy to install. Sync in seconds.

Solo incluye la pieza del sensor falta el iman y la imagen muestra que ofrecen las 2 piezas

Easy install and works as it should .

works great. No issues since instalation.