E10D

This is a solid prefab. It doesn’t leak. It’s well built, probably CNC’ed. It’s about 1 cubic foot per side. The carpet is nice and thick and doesn’t seem like it’ll come off. The terminals are ok to above average (compared to other cheap prefabs). At around $100 it’s a good purchase. Works well with some $47 Infinity Primus 12s.

I purchased this box to house two Kicker CompR 10's after my other painfully cheap subs started falling apart. This box looked fantastic when it arrived and the cut-out holes fit the CompR 10's perfectly. The sealant for the edges on the inside was a little thin in some spots, so I decided to go ahead and add more silicone to all the edges for some extra sealing. Not a big deal at all. This box does take up a little more room than I would like in my little Mazda 3 trunk, but it also does meet the minimum volume for the drivers I ordered. There aren't many complaints or little nitpicks I can list because once I heard my new drivers in this box... I was SHOOK! I could not believe how much bass I now had on the same amplifier.

While I bought this sub box for a project I had in mind, it never came to fruition, so I ended up selling it to a local Eco-Town vendor. It arrived in perfect, new condition. I could still smell the fresh glue used to adhere the fabric to the MDF which was 3/4” in thickness IIRC. Minus one star because of the spring loaded speaker wire connectors. A 5 Way Binding Terminal would’ve been a better choice, but this could be easily changed by the user. Over all though, the build & construction quality appeared to be top notch. Regretfully I abandoned the project and sold the Sony Subwoofers that were given to me by a friend which ignited my idea for the project. I had soldered in some decent 12g wiring to the terminals and had the fiber material and hardware all ready to go before skipping the project. I had planned on using it as an indoor, dual stereo sub for my 2ch. bedroom rig which consisted of a 2ch. Harmon Kardon HK3480 and a pair of Polk Audio TS2 Blackstone Speaker which sounded pretty darn good for the size of these little gems. I still have them and use a vintage Pioneer powered sub. Beast of a receiver and this rig sings when I just wanna kick it in my bedroom to listen to music or watch a movie on a small 23” Vizio TV. I used a Yamaha S1800 Universal DVD/CD/SACD player as the main source. But I digress, this speaker box is pretty good for the money and pretty sure I could’ve dialed it in for some decent thump using a small amp to drive the woofers. I’m all into making my own cabling and doing mad scientist projects like this. Hey! It’s a hobby and it’s all about having fun and enjoying.

I was a little nervous after reading the review about the box blowing apart right away, I have two Skar ix-12 on a bridged punch 550.2 at 2 ohms I'm guessing the actual wattage around 1500 or so and they hit really hard. When I opened the box up I noticed it was put together pretty well and finished nicely with no noticeable defects in quality. The MDF is thinner on the back and sides while the face is really stout, seems close to an inch thick. I've been abusing this box with excessive bass for a few weeks and its not given out on me. Time will tell but it seems adequate, and will likely continue to do it's job competently. 1/15/2021 Update: I now have two sundown 12" subs in this box with the same setup, these hit like a horse kick to the head and the box is holding strong.

Perfect fit for a 2014-2019 BMW 4 series hard top convertible! Seems well built. Can't wait to get it installed and see how it sounds.

I bridged a Taramps TS 400x4 AMP to power 2 400 WATT, Skar 10 inch 2 ohm, duel voice coil subwoofers wired in parallel making them 4 ohms. My front/rear Sony coaxial speakers are wired through 2 separate Taramps TL-1500's for 95x4. The subwoofers are in THIS sealed enclosure, not ported. That is my preference. I have always liked the cone response from subs in a sealed enclosure, but to each his own. The enclosure is heavy, it's constructed of MDF. The fabric is adhered perfectly to the box with ZERO flaws. I had forgotten what it was like to have a nice car stereo. The 3 amps are very small but don't let that deceive you. In the cabin of my 96 Subaru Impreza outback, this setup will knock your socks off. Unbelievable.

I bought this box on a limb not knowing the brand or the build quality. It was a great price and saw that it used a 1" baffle. I have a set of 10" Infinity Reference subs (which I bought here at a great price!) that just weren't living up to their full potential in a ported box. I'm powering them with a Soundstream Reference 1.500 500 watt amp (which I bought here also!). And I have to say, not only is it a well built & sturdy box, it really made my subs come to life! All the seams are fully sealed with caulking and carpeting is well placed. Now my subs are hitting hard with lower notes I wasn't getting before. The only problem I have with them is the terminals. I personally prefer binding post terminal which promote more current. Other than that, great box for the price!

Installed dual JL 10w3 subwoofers in this sealed enclosure and very happy with the results. I prefer the balanced sound of sealed vs ported and this box just reinforced that opinion.

Excelente súper mazizo

Very well built, looks good, you can't beat the price, i haven't installed subs yet, im sure it will handle a couple of 10" subs no problem Update... This subwoofer cabinet with two 10" subs sounds amazing. I lined the inside with insulation and wow! Super deep base, crisp and clear. Sub box is built very well. Good stuff, great price, amazing sound!!!

Great looking box

Very good solid box.satisfied with the bass.highly recommended 👌

Ta chido