RFIVER Universal TV Stand Base TV Legs fit Most 20-70 LCD LED Flat Screen Inch TVs, Table Top Pedestal TV Legs with Height Adjustment Holds 50KG Max VESA 800x600mm

simple to use , easy to put together. comes with various sizes of screws, washers , spacers making it fit most tv's mine was for a 50 inch lg . . height adjustable too. i had to use the large spacers but they were provided in a very comprehensive kit. would reccomend . my tv was given to me by sister was wall mounted so no stand . this is the perfect solution . also very sturdy too.

I needed a n alternative stand because the supplied feet on my new LG TV were too far apart for it to stand on my TV table. This fitted the bill perfectly. The LG set has a non-VESA set of screw holes for mounting (Why?) so a VESA mount wouldn't do. This stand is very solidly made, and says it supports TVs up to 40kG. More than enough for most TVs that aren't going to be wall mounted. There is no link between each foot and the other one, so they can be as far apart or close together as the mounting holes on the TV allow. Vertically, the brackets that the feet attach to have holes at 20mm intervals, maximum 400 mm between to and bottom holes. There is no way to adjust that spacing. The feet attach to the brackets via more pre-drilled holes, and can be set at several heights below the bottom of the brackets to allow more or less space below the TV for a set-top box, for example. The feet have soft pads that are slightly "grippy" so the TV doesn't slide about from where you put it. The feet are quite long (350mm) and are made so the TV is centred front-to-back when mounted, so they stick out quite a bit but are stable as a result. The stand is supplied with a host of different diameter and length mounting screws to suit different TVs (all metric thread). and a set of spacers that can be used to align the brackets if the back of you TV isn't flat or to allow access to cable entry ports. The kit includes a tiny spanner and Allen key for bolting the feet to the brackets, but you'll need your own screwdriver (cross-head or flat blade) for the bracket-to-TV screws. It isn't the prettiest stand I've ever seen, but its matt black finish means it doesn't show up much. I did a lot of laying out the parts to get the hang of how it went together and understand the (pictorial) instruction sheet, but if you've ever played with Meccano or Lego, you shouldn't have much difficulty. Overall, 5 stars.

Would have been 5 stars but they need one set of holes to be oval to allow for a slight movement for securing. Had to make a slight adjustment to 1 hole on each leg as it wasn't quite in line with the TV hole

Very easy to fit and hood instructions

They were good and easy to install but a bit flimsy for 40” TV but did the job and excellent delivery

Strong and holds well I recommend 👍👍

Solid, well built stand that comes with all different lengths and thicknesses of screws, along with spacers of different sizes. Meaning it can be used I would guess for any TV that has wall mounting bracket holes on the back. I have an LG which curves at the bottom on the back side but no issue due to the spacers, and being provided with long enough screws to use them. The only negative is the feet are a little long so stick our a bit too much at the front and it leaves the tv a little high, even when the feet are on the top holes hiding them the most. I am using the stand on a 32inch TV though so might not be so bad on bigger TVs

Absolute junk , parts are not good , no tapping in leg bracket to put screw in . Had to get tapping set and put it in . Wouldn’t recommend