






๐๏ธ Own the room with every wordโpaging perfection made simple!
The Monoprice Commercial Audio Desktop Paging Microphone delivers clear, professional sound with a flexible gooseneck design and dual power options (battery or phantom). It includes essential accessories like a 25-foot XLR cable, adapter, and foam pop filter, making it ideal for meetings, conferences, and public address systems.
| ASIN | B019H3VNAQ |
| Antenna Location | Commercial |
| Audible Noise | 65 Decibels |
| Box Contents | Micophone add offer |
| Brand | Monoprice |
| Brand Name | Monoprice |
| Colour | Black |
| Compatible Devices | Amplifier, Audio Mixer, PA System |
| Connectivity Technology | XLR |
| Connector Type | XLR |
| Customer Reviews | 4.4 out of 5 stars 198 Reviews |
| Enclosure Material | Foam |
| Global Trade Identification Number | 00889028029718 |
| Item Dimensions | 43.2 x 19.8 x 7.1 Centimeters |
| Item Weight Unit of Measure | 1 Pounds |
| Manufacturer | Monoprice |
| Manufacturer Part Number | 114891 |
| Microphone Form Factor | Condenser |
| Model Name | 114891 |
| Model Number | 114891 |
| Number of Batteries | 2 AAA batteries required. |
| Number of Channels | 1 |
| Polar Pattern | Unidirectional |
| Power Source | Battery Powered |
| Recommended Uses For Product | Commercial |
| Signal-to-Noise Ratio | 65 dB |
| UPC | 889028029718 |
A**R
Work's great. Have a good soft Cardioid pattern. On/Off active LED ring light is very effective.
I purchased six of these microphone units in December 2025 for a Town Hall PA system I installed. All of them worked perfect out of the box and had all of the parts and accessories as advertised. I have ordered several more since then. I was especially impressed with the soft Cardioid pickup pattern this microphone has. It was large enough to pickup the two councilmen setting at the same table but still did not cause any feedback when turned up to the volume level that I needed for the room. They have a range of about 30 inches before the audio sensitivity and low end frequencies start to fall noticeably off. The audio quality was also very clean sounding as compared to other much more expensive condenser microphones I have used in the past. The desk stand part is heavily weighted and has soft feet so it won't slide or tip over easily. There is actually a heavy weight attached inside the base that could be removed if you don't want the extra weight. It has a large on/off button which when on, activates a small LED next to it and a large, highly noticeable Red ring LED around the base of the mic capsule so that everyone in the room can see that it is active. The on/off button is completely silent when activated. There is a lot of pre-amplification electronics in the base which must help to process and improve the audio quality. However, even though the desk mic unit is Phantom powered through the base which also powers the pre-amp and LEDs, if you unplug the gooseneck microphone portion from the base and plug it directly to a Phantom powered mixer input, it will work without the base in line. However, there was a slight drop in volume when connected directly. As just mentioned, this desk microphone operates on Phantom power from about 12 to 52 volts, however it can also be battery powered by two AAA batteries in the base if Phantom power is not available. I did not use or test that, so I have no idea how long those batteries will last. The gooseneck portion of the mic is stiff enough that it has not sagged at all for the almost two years now in use. And no failures of any kind to report so far, either. It comes with a good quality 25' XLR to XLR audio cable and an XLR to 1/4" Phone plug adapter. Please know that this adapter performs just a mechanical conversion from an XLR Female to a 1/4" Phone male plug and their is no impedance matching transformer inside, if you were wondering? There only two Cons that I can list: 1) The desk microphone is a little microphonic sensitive to tabletop noise and vibrations. I have one council member that tends to tap his fingers on his desktop when he speaks and that seems to be picked up fairly well by this microphone. But he is the only one that does that and other typical shuffling of papers and other noises don't seem to be much of a problem. I did buy, cut and install 1/4" thick neoprene padding to replace the four small dot feet, but that did not help much. 2) It would be really nice if the on/off button was programmable/switchable to be able to change its function from "push once for on and push again for off" to "push to talk". There are installations instances where that would be very helpful. Be aware that this microphone does not have an on/off memory state meaning when the system is powered off or you get a brownout, the microphone will turn off and stay that way until turned back on. Bottom line: I highly recommend this desk microphone for its audio quality, functionality and price point. In fact, if you can afford the time to wait, every so often there are "Used Like New" units available on Amazon. They cut the price by about 40% and I have ordered four of those now and only have had one which had a non-working issue. But of course, Amazon allowed me to return it for full credit and I ordered a replacement that did work fine. Hope this helps!
C**.
Excellent pour le prix fonctionne trรจs bien
J**R
Nice product but....
Unfortunately, this was not compatible with our system, had to return.
B**S
Very clear audio recordings
Easy install. Nice, weighted base. Phantom power works like a charm on my RME Babyface Pro FS. Set to +40 gain on input 1 and my clients are thrilled that i ditched the Logitech webcam mic. ;) Make sure you enable phantom power on your interface. Clicked phantom power on AN1 -> removed AAA batteries and it works.
K**.
Simple, works well.
Iโve been pretty happy with this so far. I use it as a talk forward mic for my sound booth. Itโs one button, easy to use. As a preventative measure, I put white pads under it to protect my white countertop from black marks.
Trustpilot
2 days ago
3 days ago