Cooler Master MegaFlow 200 - Sleeve Bearing 200mm Red LED Silent Fan for Computer Cases

This fan runs quiet. Attractive RED LED to match the front red LED of my HAF X Case (which I love for it's cooling ability.) Fan has No LED on/off switch. Comes with 3 Pin connector Plus a 3 - 4 Pin adapter included. I connected to PSU. Fan is well packaged by Cooler Master to prevent damage in shipment. Thanks to another reviewer, I gave this fan a shot for the 2nd optional 200mm top fan in the HAF X Case EVEN THOUGH Cooler Master does not list this fan for the HAF X case. Like the other reviewer said - it fits perfectly in the HAF X (lines up to case holes perfectly) BUT THE SCREWS that come with the FAN do not fit the holes in the HAF X case. NO problem because the HAF X case comes with the extra 6-32*9 screws needed to install this fan into the HAF X case top fan holes. So - yes -- it works in the HAF X - just use the extra CASE screws - not the FAN screws that come with the fan IF installing in the HAF X. My purpose for this fan was to ADD the optional second top 200mm case fan to the HAF X because I video edit and game and needed the extra exhaust, having changed the back case fan to push/pull intake for the Corsair CPU cooler. I Chose it even though Cooler Master recommended a different optional top FAN that is ONLY sold on their Site. Unfortunately that other CM fan, a stock fan, also has a $10 shipping charge from CM. The specs on this fan (and it's Red LED) are perfect for my airflow design and fan LED colors match. And NO shipping charge. This Fan works exactly as advertised & the reds on this fan match the included front RED HAF X case fan. ABOUT INSTALL IN THE HAF X CASE: Install was a pain - not because of the fan -- but because with a HAF X case, you can't totally remove the TOP of the case to install the 2nd fan. The case top REMAINS connected to the case (even after removal) by the Front Panel wires. This makes it very awkward to work around a case top that is still attached by wires which are "short". BE CAREFUL installing a 2nd top fan in a HAF X case so you don't dislodge the wires. Fortunately I had the tool I needed to work around this issue, moving the top around while I worked. That tool came in the Belkin 36piece demagnatized PC Tool Kit w/ case that I had also purchased here on Amazon a while back. Still, any small head - narrow width screwdriver will do if it's not too long. This FAN, once installed, does everything it's supposed to. My case temps are 20C Mobo and 13C CPU. Am pleased with the HAFX case airflow, my I7-2600K CPU, this extra 200mm fan for the top, and my Corsair H80 CPU Cooler especially. Mobo is a ASUS P8Z68-VPRO/Gen3. 16GB Corsair Vengeance and lots of hard & optical drives. Corsair 850W PSU and PNY GTX560. TEMPS are important for video editing & games thus . . do recommend this fan for the 2nd top fan in a HAF X case using the HAF X case screws. FAN SPECS ON PACKAGE ARE: SIZE: 200mm x 200mm x 30mm SPEED: 700rpm CD 12V 0.30A (max) 110CFM 19dBA Air Pressure (0.595 mmH2) Rated Voltage: 12 VCD Current: 0.16A (Max 0.28A) 30,000 hrs Power Consumption 3.36W CONNECTOR: 3Pin w/ one 3 to 4 pin adapter LED: RED Screws (to fit the cases it's speced for - see Cooler Master website) I used my HAF X case screws instead. CON: I tried to register this fan on Cooler Master and NONE of the #'s on the package or the Fan itself (and there's many) were accepted as valid SNs. Per the Cooler Master website, the Fan is supposed to come with a Serial Number tag attached to the 3Pin Connector wires -- but there wasn't a tag attached. Keeping my Amazon receipt as proof of purchase in case it's needed. CUSTOMER SERVICE: Cooler Master Live Chat on their website has been AWESOME, helpful, thorough and patient with my build. And by the way. I'm a 64 year old Grandma. If I can build my own PC from scratch -- so can you! MANY CUDOS to Amazon - a GREAT place to buy PC parts.

Purchased this fan to use in a Cooler Master HAF 912 case and I couldn't be happier. Installation was a breeze, though the screw holes were not pre-threaded so I had to force the screws in to get the holes threaded, which took me a few extra minutes. In terms of performance, this fan performs exceptionally well and it is very quiet in doing so. The fan dispels lots of air from the top of the case and I cannot hear it spinning even if I put my ear next to the case (mind you I am not using any fan controllers, it is running at full speed). Fan comes with 4 screws and a 4 pin to 3 pin fan adapter in case you have no fan headers left to use on your motherboard and must connect it to the power supply. I am not a fan of LED's on my fans because they tend to keep my room lit up which doesn't allow me to sleep but the red color is very sleek looking and not a bright red but a nice, darker red which looks very nice glowing out of my case. This fan is so good I am planning to buy another one to replace the two 120mm's I have in front of the case. Don't hesitate in buying this fan as you'll have a hard time finding a similar fan for the price/performance. P.S. For those who cannot stand and/or want the LED's, you can easily cut the LED wire on the fan with a knife or small scissor which I was planning to do until I saw how sleek it looked.

First off, I have one of the Coolermaster HAF-X full tower cases (which are awesome, btw). The case came with one of these pre-installed in the front (plus 2 w/o LEDs). I've had the case for about 2 years now and have not had a single problem with the original fans that came with the case. I decided, however, that I wanted a little more cooling in my case, so I ordered 2 more of these to fit in the remaining fan slots on my case, and I have noticed not only greater air flow (obviously), but the additional red lighting from these fans fills the entire case with a nice red glow. Since most people probably don't care too much about obvious things like that, the following are the things that make these fans great: - They are quiet. I have a total of 4 megaflow fans (one without lighting) in my system plus my liquid CPU cooler) and it stays very quiet. These fans run at +/-600 RPMs but their size allows them to move a lot of air. - The red lighting is very even, and not too bright. I sleep in the same room with my computer and it runs 24/7. It poses no issues. - These will work with any standard connection for power. 3 or 4 pin on the motherboard, and 4 pin MOLEX will work. An adapter is included for use with MOLEX and includes passthrough so it doesn't waste a MOLEX connector. - Long lasting product. I have had no issues whatsoever with the other ones I have which have been running nearly non-stop for two years now.

I am very pleased with the product. I was a little bit angry when i went to install the fan in my side panel HAF X and at first thought the screws were the wrong size. I thought that because when you start to tighten the screws you get alot of resistance and the fan case makes this awful cracking sound as if it is about to snap lol. but rest assured as long as you just tighten it slowly the screws it came with will work np. Pros: Fan runs very quiet and very effective cooler LED light has a nice red glow Cons: The screws that come with the fan make a awful squealing and cracking sound when tightend The red glow from LED could have been i little bit brighter.

Bought this fan for installation into my CoolerMaster HAF mid-tower case, which accommodates 200mm fans. In this case the fan fits perfectly, although it does require longer screws for mounting (longer screws were included with my case for this purpose). OVERALL IMPRESSIONS Fan seems to have been constructed with quality materials and appears sturdy. Fan blade is well balanced on the unit I received. Sleeve-type bearing used for this model is not the best fan bearing out there, but should provide a good service life for this fan which has a relatively low rotational speed. Clear color and red LEDs look nice if you are looking for that type of lighting effect. As reported by others, LEDs are not too bright even when the fan is at 100% duty cycle (LEDs appear to dim slightly as voltage to the fan drops by fan control). Don't let the LEDs stop you from purchasing this fan, as you can remove them easily with a pair of wire snips if so desired. This fan moves plenty of air. Since installing this fan and re purposing the 120mm fan it replaced in another area of my case, my CPU temps have dropped by 1-2°C on all four cores at idle. This keeps the fans on my Corsair H80 at a lower speed (less noise) which is exactly what I was hoping for. I have not experienced the clicking noise reported by some other purchasers. This fan is for all practical purposes, silent. The sound level difference between 50% duty cycle and 100% is unnoticeable from typical use distances (the front of my case sits about 3-4 feet from my right ear). BUY THIS FAN if you can fit a 200mm fan and like a quiet PC.

The fan is nice and quiet but for the price they could have at least drilled some screw threads on the fan. Instead I had to crank away using their cheap screws and stripped the tops in the process. I got it in but it will be tough to remove. I purchased the fan because the Cooler Master HAF 922 Case didn't come with a fan on the side door panel. Coolermaster recommends the air goes in the front and side and out the top and rear of the case. My system idles 40C and the GPU at 45C. After installation I saw no reduction in temperature whether I was idling or playing games. I assume it's because the case already has plenty of airflow without the fan. If you're looking to complete your case, don't bother unless your system runs unreasonably hot. I probably would have been better off using the money toward a CPU cooler.

I have a Coolermaster HAF-X. They sell with only one fan at the top. So, I purchased this fan, removed the side fan without LED's, installed that one on the second top slot and the one with the red LED back in the side. So now, The front and side are both a colorful red. Temperature wise, a slight improvement on my memory sticks, and CPU since I installed it backwards. The back top fan blows out the warm air and the front top fan blows it in, therefore allowing more air for the Coolermaster V6GT. The engineering of the HAF-X is great with the exception of the lack of airflow towards the top part of the mobo due to the fact that the front fan air intake is just about all sucked up by the hard drives, immediately in the back of it, while the top front lacks air intake. Problem solved by this solution! Looks great runs great, not expensive and it is an original Coolermaster component. Easy to install. Only con is, the LED light on the fan is not switchable-remains on. I dont know if the front switch for the LED light fan and wiring is capable of handling two fans. Not to mention the 3-pin plug circuit. Could easily be done but not worth the gamble as I assume it would not be plausible.

works just as described has been running for years in my rig still hasnt failed STAR RATINGS: Each product is carefully reviewed in an unbiased manner. Star ratings are earned, never given. 1 Star: This product is not worth your time. There may be something wrong in the product details or description, it does not live up to what it is advertised as or made extremely low quality. I would tell my friends, acquaintances, and strangers that they shouldn't use their hard earned money on this product. 2 Star: This is not a great product at all. It has mistakes in the product details or description and does not live up to what it advertises or normal customer expectations. It is still now worth the money. 3 Star: This is a neutral rating. I could take it or leave it. It met the product description and details for the most part but isn't something I am ever likely to order again. It could have some really cool features, An awesome looking design, Or maybe it’s just a killer deal. But overall the price of the product is not worth it. 4 Star: I like this product. This item has met all expectations, The design is sound, The build is great and the product does what it was made for. It’s a great product that i can recommend buying. However it didn’t completely wow me. It does what it is supposed to do.This is what most products fall under. 5 stars: Wow! This item is amazing, I absolutely love it, it is an exceptional, impressive product. Not only does it meet all expectations but it’s a product that’s well made (designed, formulated, composed, etc) and lives up to the product details and description. It exceeds normal consumer expectations.

Spedizione eccellente! Ho messo la ventola in estrazione sul mio haf xb evo!. Compie egregiamente il suo lavoro ( sposta una grande quantità d'aria). L'ambiente interno del computer ora è molto fresco(anche se la prova del nove la avrò in estate). Infatti all' interno del pc ho circa 24 gradi con una temperatura esterna (della stanza) di circa 20. in ultimo la ventola risulta essere molto silenziosa ed i led rossi (che prima non mi convincevano) sono discreti e non fastidiosi!

Ich habe mir diesen Lüfter als Frontlüfter für mein Graphite 600T besorgt, in welches er Luft pustet. Und ja - er pustet ordentlich! ;) Angeschlossen ist er an die integrierte Lüftersteuerung. In der 9 Uhr-Stellung ist er praktisch nicht zu hören, erst wenn ich zu 3/4 aufdrehe hört man ein (unauffälliges) Luftrauschen. Im Gehäuse ist dann ein ordentlicher Luftzug zu spüren, alle Komponenten werden gut gekühlt. Die Temperatur von CPU und GPU haben sich unter Last um jeweils 5°C bzw. 6°C verringert (hatte vorher den Standart-Lüfter von Corsair drinnen, welcher aber unerträglich laut war). Alles in allem ein wirklich guter Lüfter!

I installed this 200mm fan at the top of my Corsair 650D case. It's a perfect fit for that case, with a beautiful red glow coming from the top and lighting up the internals for viewing through the side window. Air flow is absolutely terrific! And it's very quiet even at highest the fastest settings. I highly recommend the Megaflow for when you need a 200m fan. Comes with red LED, blue LED or plain black with no lights - so there's the basics covered in terms of aesthetics to match your system.

silent, bright led. does the job well if you looking for a 200 mm fan.

Muy buena relación calidad/ precio Es silencioso a bajas revoluciones, pero no completamente cuando esta a full, en general hace menos ruido que los ventiladores mas pequeños. Los leds son bastante brillantes, lo cual puede ser ventaja o desventaja. En mi caso se ve muy padre en mi rig ( Cooler master HAF) Eficiente para extraer aire, le bajo mas de 3 grados a mi sistema, no estoy muy seguro que tan bueno sea para push. En general es muy buena compra, recomendable.