NEW WR55X10942 Control Board Motherboard for GE Refrigerator PS2364946 AP443621 WR55X10942P by PartsForLess Co- 1 Year Warranty

I have a GE GSL25JFXB LB refrigerator and this new board work. Its not an exact copy of the OEM control board, as you can see from my photo. There are a few plugs that are not used for my model, but it worked and my refrigerator is now fixed! I think this is somewhat of a generic board that can be used across different models, which is the reason for the unused plugs. So happy this worked!!

I installed this on a GE Profile PSHS6TGXBDSS refrigerator that was made in 2008 and the mother board was from 2007. Being that its' 2024, that's pretty good as far as electronics go these days. The instructions stated to cut white wire 2 from the J1 port and then showed an illustration pointing at slots 1 and 2. Mine did have a wire going to slot two but it wasn't white. Instructions later stated to cut some green wire too somewhere if my refrigerator had a freezer on the bottom. But my GE Profile PSHS6TGXBDSS has a vertical freezer . I just ignored those instructions and plugged it back in the same way the original mother board was plugged in. So far so good. I will come back and modify this review if things change. BTW, my refrigerator was having the following symptoms which let to me changing the mother board. The first symptoms were that the water would sometimes work and then sometimes wouldn't. It might go out for a few minutes, hours or a day or so. Then it would work, and then it wouldn't. Within 6 months the front control panel started flickering in and out, not really responding to pushing any buttons. Around that time the refrigerator would start clicking and after about 10 minutes or so would go back to normal. Unplugging or turning off the circuit breaker would typically not help, maybe make things worse but the fridge would eventually work. We'll see how it goes.

My refrigerator (GE profile 20 plus years old) stopped cooling. The compressor gets no power. I replaced the circuit board and the refrigerator comes back working again. This is the third time I replaced the control board for this refrigerator, each failed one has lived from a little more than one year to several years. Let's see how long this one will survive.

When I saw that this had free returns and was priced right, I gave it a try. Glad I did. We had a power outage due to a large transformer being hit by a car a few blocks away. The 15 year old frig stopped working a day or two later with only the lights coming on inside. Replaced the overload relay and capacitor first and that didn’t work. Inspected the control board and didn’t see any abnormalities. But, went ahead and replaced it since a new frig is $1400. It worked and I am the hero at least for this week. Good luck! If not, I assume you can return it for free.

Overall very pleased with delivery and product which fixed my refrigerator:-- 2005 GE Profile side by side PSS26SGRBSS. The bad motherboard was 200D4852G010 per label on the board. Placed order Thursday for stated delivery in two days on Saturday. Arrived noon on Saturday—earlier than I expected as usually these two day deliveries arrive later in evening. Package was professionally wrapped and included instructions. The board was clearly brand new and sealed in a heavy clear packaging (I assume to protect from static electricity). This product matched that model board # above. Symptom:-- when dispensing water the temperature display panel at the top of the fresh food compartment would go blank except for blinking HRS and fridge stopped cooling. After unplugging the fridge and letting sit for about an hour (tried this repeatedly), sometimes the unit would remain stuck in the HRS mode. Other times would begin cooling both freezer and fresh side again and show temperatures on the display but failed every time I dispensed water and went back to blinking HRS mode. The green light over the water dispenser control would also dim and sometimes blink after pressing the dispenser lever and shutting the down the fridge . Since the fridge would cool at times (until hitting water dispenser), after doing multiple searches on the internet I concluded it was a failed motherboard and nothing else. I had also checked the connector under the hinge of the freezer door and ruled that out as problem. I took photos before and during removing the old motherboard. Installation of the new board took only a few minutes. The refrigerator started up and began cooling as soon as I plugged it into the power outlet. Dispensed water perfectly without shutting down the fridge.

These boards go bad every few years even if you buy the OEM brand and pay 2x as much. The defrost heater circuit design is not robust on these, nor is the 12v power supply that feeds the controls and ice maker flapper on the door.

Mamalona la control board

Never a good feeling when you're walking through your kitchen and your feet get wet! Spent a few hours troubleshooting my fridge for why it wasn't working. Noticed my compressor fan was working, but the compressor itself was not. Did some standard checks on the compressor (thanks to YouTube) and its relays and determined that was ok. Decided to take the main control board out and take a look at it (see attached picture) - problem found! Went on to Amazon and a couple other websites and Amazon had by far the best price (almost $200 cheaper than some other websites). In addition, Amazon got it to me the same day (ordered 2am Sunday, got it ~7pm Sunday). Installed the new board and the fridge is now operating properly. Took a star off the rating because the directions provided with the board did not discuss using the new ground wire and how to attach it to the board and the fridge. Luckily, I saw how to install it on a different website. Overall - happy with purchase (really happy w/Amazon delivery speed - saved a bunch of food replacement cost!) UPDATE (12/4/2019) - This board just failed after less than 2 months in service. Now I just need to figure out how to collect on the 1-year warranty.....

I have a GE Profile refrigerator Model # PDS20SBSDLSS bottom freezer drawer that I bought in 2010. Now in 2024, all lights are working, all fans running, but compressor will not run. Checked compressor overload and start relay, OK. Checked Compressor contact pins for shorts and resistance, OK. Visually inspected main circuit board WR55X10416 and found burnt board at pin on main relay, a common sign of a weak relay causing high resistance. Would have been nice to just replace the relay, but the board and solder pad was damaged beyond repair. Replaced original board, a direct swap, with WR55X10942 with the same basic circuitry. Been two days, everything running good. Defrost cycle good. Freezer and refrigerator adjustable temperatures are good. Compressor cycling good. Gave the refrigerator it a good cleanup inside and out. Now it looks and runs good, if not better than the day I bought it. I AM HAPPY!

I used it for Ge fridge which was suddenly not working after power shortage. After replacing it, the fridge is working now. I hope it can last for longer years. Used for the week but no problem right now. Maybe I will follow up soon to update the newest situation.

work like news and better than the oem parts

I am happy with the purchase. The product works as descried.

Provided exact part number but part received was different. It did however , work as a replacement part.