YIWENTEC Mini SAS 36 SFF-8087 to (4) SFF-8482 Connectors With SATA Power 1m (1m)

they do exactly what they are suppossed to... Bear in mind these are for NOT SATA drives these are for SAS Drives. Also remember that modern SAS drives support a power down feature, if you plug your drives in to these and the drive doesn't spin up its not these cables fault its the way the power is supplied, you need to either use a molex to SATA power supply (which doesnt use the 3.3v) or disable the 3.3v on the SATA power connector. I used a SATA power splitter and simply cut the 3.3v stopping the supply there Again thats a feature of your HDD not a fault with these cables, these cables work great.

This cable will plug into your sas controller card or if your motherboard supports it, into that i guess.The othe end plugs into your sas drive and then a standard sata power cable plugs into the back of this cable at the sas drive end.Dont forget to initialise the drive in windows' disk management ' to see the disk in windows.cable can support 4 sas drives, but keep an eye on your sas controller card as this will really heat up and need to be cooled.Me, I only have 1 drive connected so just let the pc fans take away the heat.great little cable.

I found this when looking for a cable to connect to my HBA for multiple drives without needed multiple SAS to Sata adaptors. It worked perfectly and allowed me to change the sector size of 4 drives at once instead of 1 at a time and when you have 50+ drives to do each taking between 2 hours to 24 hours, every little thing makes a difference. Quality wise it's fantastic, very happy with it and it's now installed in my pc which I use specifically for changing hdd sector sizes.

Bought to connect SAS drives to an LSI 9220-8i host bus adapter. Plug one end into the HBA, the other into the SAS drive and piggyback a standard PSU SATA power cable on the back of the drive connector. The cables are thin, but shielded, so far written 5TB through them without errors. They are flexible and easily bent, but probably best not to kink them, and only pull on the connector rather than the cables. Have to press pretty hard to make the SAS connection and also the PSU cable connection, but fine. Just on e thing to watch - the depth of the piggyback connector is more than a standard SATA connector, so check it wont hit your motherboard or if disks face sideways, that there is enough case width - on an Antec One case, there isn't really. Happy overall - I bought a second one afterwards.

Using them on a personal computer at home in conjunction with a RAID card. Works really well, just not long enough to be able to be slotted into my 3D printed holders for my SAS drives.

Absolutely fine cables - don't forget that you'll need separate power cables though.

Cables are of good quality and work as expected, price is fair and easily installed.

Needed this as changing my home server case. Was unsure of product as this had no reviews. As always super fast and friendly Amazon Delivery! The cable was nicely packaged, the quality of the cable is perfect for the money spent. Probably on par with other server manufacturers (Dell/HP) etc.. The hard drive ends are labelled 1-4, and have nice snug fit into the hard drives. Would recommend for anyone who need a cable like this.

Works exactly as expected

COLLE BIEN RECU ET TRES BIEN EMBALLE MERCI

Worked as described. Great product, just wish it came in a 50cm length.

Super fast delivery and works as expected

Probado en hp dl 360 den9.