🚦 Light Up Your Life with Confidence!
The Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs are a set of two high-performance bulbs designed to enhance your vehicle's visibility. With a non-polarity design and built-in resistors, these bulbs are easy to install and provide 400% more brightness than standard halogen bulbs. Their full aluminum housing ensures optimal heat distribution, while the Constant Current IC technology guarantees a longer lifespan and lower power consumption.
Manufacturer | Syneticusa |
Brand | Syneticusa |
Item Weight | 13.7 ounces |
Package Dimensions | 6.97 x 5.75 x 2.05 inches |
Manufacturer Part Number | LR-3030-40R-V3-3157 |
Position | Right |
B**N
No Hyper flash !
I installed these in the rear of my 2010 corvette (tail lights). They were super easy to install. They are really bright and best of all, No Hyper flash. I had previously returned two bulbs(from other company's) that said their bulb had "built in" resistors and would not hyper flash. Well, they hyper flashed. Syneticusa has a great product and I highly recommend them. I just installed them on 4/5/2023, so I can't speak for longevity.
N**R
Works Great
Bright, and the built in resistors make easy install. Been working for over a year.
J**S
Perfect...
Got this for my 2012 camaro. Works perfectly, very bright and no error code. Buy it... Now...
C**N
Bright & No Hyperflash
The media could not be loaded. I like them so far. Very easy install, no hyperflash, and bright. Installed on a 2005 Silverado. Hopefully they last a while ...
T**
Installation was easy, and very bright.
Just put these on my truck 10 days ago, i really cannot rate the longevity of the bulbs yet.
T**N
Works great as stated but poppped out of socket
Product does and works good but popped out of light socket.Had to put tape to hold in place . Shouldn’t have to do that.
E**.
2018 f 150 tail/brake/turn signal lights. full functionality. no hyperflash
I have a 2018 F150 5.0. Amazon's filter thing will tell you that this does not fit your 2018 F150 this is incorrect. I've personally installed these into my 2018 F150 and they do infact function properly as a taillight they light up brighter for the break and they when you took the turn signal they will Flash without hyper flashing without error codes these will work these are the size you need for your 2018 F150 to be able to just plug and play.now the only thingthat I will say was a b**** is that there's the little grommettype base on the bulb not really sure why they did this. it's very snug when installed I don't think it would fall out, however my truck is lifted I take it off road quite a bit I can tell you that on these Ford's there's nothing preventing mud and all that crap from splashing up into the back of the tail light assembly I know this for a fact because I've gone under the truck to spray all the mud off and it found used miles to Mud clumped up in the side of my that little Hollow Gap space between the actual bed and then the outside of the bed of the truck and there's nothing restricting a bunch of s*** from being shot up on the backsides of these so that being said I use caulking I shall use industrial-grade sealant out of the caulk gun to basically stick these in place and waterproof foam as best I could I do say that they will pop in and stay pretty snug I don't think however that they will be able to stand up to a bunch of water or mud if you're somebody like me goes and takes it off road so I caulked the backside of them. these would be perfect if they had for the base of the bulb assembly instead of that rubber wedge grommet and actual OEM style harness clip rotating whateverwith a waterproof gasket something that fits snug like OEM and won't let water and s*** into the headlight or tail light I'm sorry the tail lightother than that they workand they do fit your 2018 F150 for a fact.
A**
Not bad....
So far so good. Nice and bright and no errors. Installed on a f150 with the 3157 factory bulbs. Will update review to include longevity once I have them for a longer period of time.
M**D
Easy install
These are 100% no hyper flash and worth the price. Clean packaging and clean setup. The resistor has a nice solid casing and the weatherproof seal is great also. Very bright, Installed in a 2009 Dodge Caliber SRT4
J**E
The best 3157 LED replacement!
Review for the Red 3157 LED Replacements.I've tried 3 different brands of 3157 led replacements from amazon and have been disappointed with all of them.These have been error free and hyper-flash free in both my Ford F350 and Jeep Grand Cherokee. Furthermore they have lasted over a year in my F350 which is all I wanted to achieve by switching from the incandescent bulbs.The price is on the high side but having something that lasts and that looks good is well worth it!
S**N
Easy install in under five minutes, nice and bright.
I installed this product in my 2006 Hummer H3 with no issues
B**L
Work great, no errors
Nice and bright
T**T
They are error free.
Easy to install. They are error free and do not hyperflash. 2011 Jeep Patriot. It would be nice to have them white instead of red. Just installed them so can't comment on how long they will last but they look and feel solid.Edit: One side stopped working August 2022. Seller replaced free of charge and was very easy to deal with.
Trustpilot
3 weeks ago
2 months ago