UNIVERSAL ARTICULATING SINGLE ARM LCD LED PLASMA 27-52" TV WALL MOUNT FREE HDMI

Very good product for the price !! Similar mounts in the stores are $70 - $120 . The only way to improve this mount is to give it the ability to tilt, but that would increase the price. I bought this item to use at work. The monitor is mounted high on the wall (10') and tilt would improve the viewing angle. Mounting it lower would be just fine the way it is. However, for the price I paid on this one I saved nearly $60. I am very happy with the product and it was a very easy install. It came with all the hardware needed to mount to the wall and mount the TV as well. The swivel motion is very useful as we have a wide room and need to change the angle once in a while. I am going to buy this for my home as well. The back plate is set up well to mount directly to studs in the wall since it has holes that are 16" on center. If you are going to change the angles alot make sure you leave enough slack in your cabling to allow it to move. It has a very big range of motion !

I am a licensed electrician and i have hung a lot of TV's on the wall for other people and my own home. This is by far one of the top 5 mounts i have ever hung. I payed $31 with shipping and it arrived on time. In a retail store this mount would cost $120 or more plus tax. The thickness of the steel and the construction of the mount are top notch. I do not recommend using the provided wall anchors directly into sheetrock... this is never a good idea with any wall mount. The two holes farthest apart top and bottom are 16 inches apart and that is standard length between two wall studs. I used 4 of the provided mounting bolts ( two top two bottom) screwed directly into the wall studs. It will most definitely hold 100 lbs

I purchased this for an older 40" LCD TV, which of course weighs more than the newer and thinner LED televisions. I am very impressed with the strength and durability of this mount. I've used several low-cost swivel mounts in the past, and usually worry about the weight of the TV on an extended arm. But even with my heavier LCD TV on this arm, I am not worried about the weigh on the arm or the wall bracket. I believe a larger LED would be supported fine by this bracket.The dual swivel points of the arm allow great flexibility of the position of the TV. I chose this particular mount because we have a dresser and mirror on the wall where the TV needs to be mounted. I was able to put the mount on the wall, partially behind the mirror, then have the television positioned to the side of the mirror.I have attached two pictures. The picture of the mount on the wall has some places where the paint is missing because that is where the previous mount for a smaller television was also mounted.One important suggestion, which I also noted from another reviewer, is not to mount the wall bracket level. You should tilt it away from the side on which the TV will mount because the weight of any large television on the swivel joints will cause it to sway downward on that side. So by mounting the bracket higher on the side where the TV will hang, will make the television level. Don't go too far, but some is definitely needed.

simple - but works good. I mounted my 46 inch lcd and it went up with no problems. I mounted it to studs per manufacturers requirements and its sturdy (DO NOT TRY TO USE ANCHOR BOLTS ON DRYWALL - ONLY MASON WALLS). It swivels fine left to right and extends nicely - the vertical angle has to be set and then tightened into place by two screws - but it is adjustable. For the price - it does the job fine and at more than half the price of most. OH YEAH - and a FREE HDMI cable doesn't hurt

Much cheaper than mounts you will find in the stores. Shipping was prompt, packing was professional. I have had no troubles with this. It was easy for me to get attached (although since I don't have certain tools I did have a friend actually mount the mount to the wall), but it was easy for him to mount. I would purchase this again if I ever get another TV that required this size.

I tried to put my 65 lb TV on this. It was rated to 100 lb, so should have been no problem. The part that attached to the back of the TV is so thin that it bent, and put the screen at an angle, I would have to lay on the floor to see. Terrible product. Good seller though. Communicated well and handled the problem. If you have a lighter set I would totally use these.

The mount works, and everything is included but I have a couple of issues...The metal on the bracket that attaches to the TV is very thin. I attempted to mount a TV that was under the maximum weight but was close...I did not feel confident that it was safe when I watched the metal bend and flex.In addition, my tv mounting holes are 25"....this bracket says it will accommodate that dimension but it takes the bracket to its extreme limit and in my opinion renders it unsafe. Each end of the bracket is supposed to be supported by two metal tabs on each end. With my application only one metal tab would have been used...I decided it wasn't worth it and switched it with another mount I already owned.Now I'm using this on a smaller and lighter TV and it works great. If the specs were accurate I would rate this much higher...it works, and works well, just not for the TV I bought it for.

Ive had this wall mount for years 3 moves and it still does great thank you