VIVO Triple LCD Monitor Desk Mount Stand Heavy Duty and Fully Adjustable, 3 Screens up to 30 inches STAND-V003T

Got a used one and it looked amazing! No scratches or anything! I absolutely love this stand. It looks very good and was easy to build. The cable management was good and hides the cables really well. It’s larger but that is expected with a double layer screen mount.

Good and sturdy I would buy it again, definitely use a home impact drill for a proper tighten and make sure your desk has a flat surface at the bottom and not a metal bar going across the bottom of your desk lol.

Probably THE best VESA mount for the price. This is a great and sturdy product that you can purchase for at the fraction of the price of other consumer products. In this review I'll tell you why I chose this over the various other options and the quirks to using it. This was a very simple product to construct and mount to your desk out of the box. What I have mounted to this are both my 27in AOC i2757Fh monitors (bottom) and my 27in HP 27xi (top) via VESA mount adapters (sold separately). That's a whole lot of real-estate you're working with there buddy! That's right, I'm working with three different 27in monitors and the only reason why I knocked off a star for this product review is due to the main pole being short one or two inches. As seen in the photos, I'm working in a very tight-nit space where every inch matters (size does matter in this case), you can see the top monitors arm sitting slightly above where the pole actually ends and this causes part of my HP's screen to get cut off by my two AOC monitors. Yes, this would have been the perfect set-up had it not been for those meddling kids! Oops, wrong scenerio, but you can see in one of the photos that it's physically impossible to lower my two bottom mounted monitors due to raised part of the desk (wamp wamp wamp). So if you have a flat desk, I'd wholeheartedly envy you and recommend this VESA mount to you at the same time. I have zero issue with screen wobble and the included tools and accessories are MORE than enough for setting this mount up (minus where I had to use a screwdriver for attaching the vesa mount adapter to my monitors and the mount itself). Not sure how I feel about the quality of the cable management tie downs that are fairly easy to pop out, but at least they comfortably shroud all seven of the wires running down it. When tightening the monitor swivels, remember to slightly tighten them before mounting your monitors, it'll make your life a little easier. All-in-all this is a very nice and would recommend this VESA mount to anyone that has 2+ monitors and wants to keep their desk space looking clean *cough cough* I didn't say my cable management was on point yet, as you can see in the video. Oh right, I chose this mount because I don't care much for the overpriced and rugged free standing mounts that have three arms stemming from one spot. It also wasn't practical for my space. Why buy something maybe double or four times the price of something that's already very practical? Why do I have my monitors angled? Because I stream and sit x-feet away from my monitor (explains why I'm blind) and need to see my secondary screen next to it while I game. Have you ever tried looking at two 27in screens side-by-side to each other from three feet away? It's quite difficult seeing everything. Anywho, if you have any questions feel free to post them and I'll try to get back to you as soon as possible.

I think its perfect for an ultrawide monitor on top and two monitors on bottom Fits perfectly on my desk, Sturdy and everything. I love the cable management clips but I also suggest velcro zip ups but thats just preference

I love this thing! I was hesitant with it being desk mounted and how well it could support 3 monitors. Not just monitors but the ultra wide curved monitors! Highly recommend and very easy to set up. I did not use any screws just the clamp and it hold very well even when moving or adjusting monitors. Brackets are included.

First Installation and Assembly. The system fit together without issue and was Straight forward enough I might have had no issue even without the assembly instructions. (This is a good thing as the assembly instructions are small and slightly dense.) Both the clamp and through-hole mount work as one would expect and hold the full rated weight. Once I had the system assembled and standing under it's own strength mounting the monitors took about 2 minutes each (Including the time it took to switch out the stock stands with the 100mm mounts) with the entire setup right up against the wall. Total install time was about 20 minutes. I also inverted the order so the largest single monitor is on the bottom. The system holds the two small 20" 1080p monitors without issue and Takes the 35" 1440p Ultra-wide without issue although the bolts that handle the clamping force need to be fairly tight to handle it. Overall for the price, I got a lot of mileage from this thing for the build it is being used on. For $3 I installed a spring to help take the weight of the larger monitor although that was mostly for personal comfort as the thing held up fine without it for more than 2 weeks.

Good quality, my desk was too thin for it making it flex

Fully adjustable is a bit of a misnomer on this product. Height is completely adjustable for both the twin and single mounts, so that's a plus. However, it is not possible to effectively adjust the distance between the two side-by-side monitors without consuming space in front of or behind the mount (the width adjustment is done by bending the arms, not with any sort of slide adjustment.) This means that to have two 24" monitors touching and a desk against the wall the monitors protrude into the desk area by almost 12". Likely not as big an issue with 27" monitors, but with my 24" screens, this mount hardly qualifies as "fully adjustable" and actually wastes significantly more space than the stands. Outside of that issue, the mount is of reasonable quality. The single mount does not appear to have a swivel lock (tilt/angle yes, just not swivel) so it is prone to move just a bit, but has not been of major concern. This does not appear to be an issue with the lower screens as they mount with an entirely different mechanism. Main pole is solid, clamp is reasonably strong and large enough to mount on a tempered glass desk without issue (so far!) Overall, not pleased with the mount though I must admit that it is my fault in that I now clearly see in the image the design of the mount and had I thought about it I would have known it would not work for a desk that is pushed against a wall. Edit: Decided to bump from 2 to 3 stars to acknowledge that the stand does everything it was designed to do and the oversight is more my own than a product design flaw.

Item received in good condition. Arrived earlier than expected. It felt sturdy and solid. Simple instruction and easy to assemble. Have yet to mount the dual arm but the single monitor arm was good and strong.

Sirve bien y hasta el momento ha resistido sin problemas un pantalla de 33" en la parte mas alta

Honestly the best stand I have had so far. I have 2 24” and 1 37” ultra wide screen attached and it’s amazing It was easy to setup cable management is great and it clamps to the table securely and well

This thing feels so robust, very well put together and no issues with it. The 2 different mounting options for the desk is good, I’ve got an ultrawide 29” on it and 2x 24” 16:9 monitors.

I wasn't sure if this product would be right for me, but it turned out better than I thought. I mounted two 24.5 inch monitors on top and my 34 inch monitor on the bottom. Little bit messy to setup, but figured it out eventually. Definitely value for money!