Start-X Remote Starter Kit for Jeep Wrangler JL & Gladiator JT (2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025) Vehicles (NOT 4xe) with Push-to-Start Ignition | Plug & Play | Lock 3X to Remote Start

Great addition to the jeep without the factory price. Very useful in winter or summer and the range was impressive. Very easy to install

While it’s not for beginners to install, it was fairly easy all in all. When I connected to my computer though I kept getting a message, “device not found”. Strangely enough, I swapped usb ports and it immediately found it and programmed it. I’m very happy with my purchase!

Very happy with this purchase. I chose the start-x remote starter for my 2025 Jeep Gladiator after watching install videos for several "plug and play" starters. I was surprised to find that many of them still required tapping into part of the factory harness. This one is a true plug and play. No words to cut or tap. The harness is simple to feed through the dash. The connections are secure. You dog have to par the unit to your vehicle then remove it and connect it to a computer to flash it with the firmware for your vehicle. The process was simple enough. Then reinstall into the vehicle and test it out. It worked first try. The best part was the value. Some of the competing units exceeded $300.

I’ve only had this installed for about a day, so the review may be premature but so far so good. I had this installed on my 2024 Jeep Wrangler 4Xe. I know they say you can install it yourself, but after watching some videos about how to remove the different pieces of the dashboard, I decided it would be best to let a pro do it. I took it to a local car audio shop and he said he installs these specific Start-X products all the time, no big deal. He had it done in under an hour. Important: It comes pre-programmed for a 2020 all gas JL Wrangler so it didn’t work on my vehicle at first. He had to flash it to reprogram it for the 4Xe (Plug in Hybrid) model. Once he did that, it was all good. When I first got in my vehicle after install, it had done something to my infotainment system. The climate screen was not functioning correctly and you could only change climate with the physical buttons, but the screen was showing as if you weren’t changing anything. It was a weird glitch. I went in to the infotainment system settings and did a factory reset and that fixed it. Everything went back to functioning as normal and the remote starter still functioned properly. Not sure if it was the starter component that caused the glitch or it was something the installer did, but either way, the factory reset fixed it so all good. Pretty simple use… Click the lock button on your factory key fob three times, the vehicle starts. It will run for 15 minutes, or you can click the lock button again three times and it will shut off. One thing that is different from other remote starts is that you have to press and release the brake, and then press the brake again to shift in to gear. If you simply press on the brake and try and shift right away, the vehicle will shut off.

Overall it works and install is easy. Beware the instructions are not accurate for all years. The 2024 wranglers have a total of 7 screws that need removed to remove the trim. I also found that once it was completely installed the functions do not operate as described. It states that you can shut the jeep off by clicking unlock 3 times after running but that is not true in my case. Also it says the engine will shut down 45 seconds after opening a door and that is not true either. I dont believe it will be an issue for me but the inconsistencies are why I gave it 4 stars.

I hesitated for several weeks before deciding to purchase. Worried that it wouldn't work properly (or at all), or be a pain to install. I am not very inclined with this stuff, but it only took 40 minutes to install and it works great. Installed on a 2020 Wrangler JLU and very pleased. Will update or revise if needed in the coming days...

HOLY %$*& this was SOOOOO freakin easy to install and set up. I think the hardest part was reflashing the module and that was SUPER easy if you just follow the video tutorial! I STRONGLY SUGGEST THIS I was facing a 500 dollar install and instead chose to attempt this. What a cost savings to ME!

Very easy to install. Installed on a 2020 jeep wrangler rubicon recon edition and it didn’t work at first. Had to get some technical help to reprogram and reinstall. Set it to the max setting of 35 mins until auto shut off. But now when I get in and press the brake to put it in drive it shuts off. Not sure if it’s because it has the auto start stop and it’s the rubicon gas turbo. But we’ll see if we can get it figured out. Definitely enjoy being able to warm up the vehicle without having to go outside but despise having to start it again any putting twice the wear and tear on the starter. I’m kinda looking towards just getting the OEM installed even if it cost more. I have contacted them about this issue now and they are not responding to any emails and it’s hard to get ahold of anyone on the phone during their times of being open. Buy at your own discretion. Reviews helped me buy this but My experience hasn’t been good but others haven’t had any issues.

Works perfect on my 24 Jeep 4xe. Install was straight forward. Just need to flash unit to the 4xe before installing.

PCも使いましたが、説明書どおりに進めると簡単に設定できました。 ロックボタン押下✕3回で無事にエンジン始動した時に買って良かったと思いました。 ただ、インナーのパネルを外す際は硬いので注意が必要です。 また、説明書は全て英語なので、Googleレンズの翻訳を使ってスクリーンショットで保存し、それを見ながら接続しました。 キーレスが届く範囲でしか始動できないので、冬場以外は使わないのかなぁと思いますが、簡単に接続できたので良い買い物だと思いました。

I hesitate to to buy it, but I was wrong, great work fine with car key fob and easy to install.

Works great easy install just follow the instructions . Took 30minutes max

2021JLディーラー車 エンジンスターターが欲しく色々と物色して全て自分で出来そうなこちらにしました。 説明通り取付、プログラムをして再取付け、ハイ出来上がりと１時間程で終了です。 値段よし、取付簡単、プログラムが英語だったのでGoogle翻訳して全て自分で出来オススメです