Clicker Klik1U Universal 2-Button Garage Door Opener Remote

Works and was able to re-code it easily to my 2015/2016 Sears Craftsman garage door openers. Somehow, I lost the original opener (which I didn't really care for in the first place). The original came with three (3) large buttons. I have two (2) garage doors. The outside lights are on a photo sensor so they come off and on automatically with the daylight (or lack thereof). I really did not see the point of having a larger garage opener with an additional button that I would probably never use. This Chamberlain model works great.....coded "one" for the larger door and coded "two" for the smaller, single garage door. The directions are pretty straight forward and was easy to pair with my Sears Craftsman units. Total time was maybe 5 minutes.....remember that you are coding these remotes to the actual motor drive unit that is above the car (not the wall unit by the house/inside door and light switch). You may have to carefully take off the clear/white shroud that covers the light bulb(s) to access the fuse box and "learn" buttons. Like almost all remotes, this one too comes with a visor clip for ease of use and a quick reach. The overall size of this is about half the size of an Apple iPhone 5. Without the visor clip, it is small enough to fit inside your shorts pocket or jeans/pants pocket if you wanted to take it with you during a walk/jog or bike ride away from your house. Most likely, I will be ordering a couple of more (as spares), just in case.

I purchased this remote for two Chamberlain garage door openers and ditched all the wiring and switches installed in the garage. Using Velcro, I attached two strips on the back of the Clicker universal remote, then stuck it to the wall by the door entering the house from the garage. The back of the remote is flat, so it sets against the wall perfectly. What's nice is, if anyone needs to use it, they can just pull it off the wall. The Velcro peels apart and the remote can be carried or placed in a pocket (it's small). When you come back, just press the Velcro back on the strip on the wall. The remote comes with a clip that can be slipped into the back of the case. If you intend to use this in your car, for example, it can be easily used for that. The clip enables it to be placed on your sun shade or any other place in your car. Programming was a snap! I purchased this particular remote because it's made by Chamberlain. I have two Chamberlain garage openers. One is only a few years old. The other is at least twenty years old. I was concerned whatever remote I bought wouldn't work with the older opener. This remote worked perfectly! It identified the other opener, which the instructions stated was built between '93 and '96. The instructions are easy to follow, and I didn't have any problem trying to figure out how to program it. It took about ten minutes to program the remote for both openers. Programming is accomplished by either setting DIP switches inside the remote or pressing buttons on the remote along with the Learn button on your opener. Since I had Chamberlain openers, I just had to press the opener's Learn button and program the remote using the remote buttons. The process is fairly simple, and the instructions explain it well. The remote uses a common 2032 battery, which is easily found in drug stores, grocery stores, big-box home improvement stores, etc. Not only do I recommend this remote, but I've *already* done so with a friend of mine.

I had to already return another remote that was supposedly universal for all Liftmaster garage door openers. Ultimately I had to call Chamberlain support to find out what remote would work with their equipment, because nowhere could I find anything about one working with a blue learn button. It is all purple, red/orange, green in instructions out there. The first customer service rep I spoke with was no help, because she kept insisting that according to the FCC ID I was giving her off the opener, the remote for the red/orange button should work. Kept telling her I already had that one and was returning it because it in fact does not work with blue learn buttons. Thankfully she either hung up or the call was dropped and she couldn't call me back (her story), because when I called back and asked for a supervisor I found someone who actually helped me. He was able to tell from a different ID on the opener that I had to follow instructions as if I had a green learn button. Turns out the blue button openers where something of an anomaly. This product arrived today, and in under a minute I had it programmed. (Press program button on remote and hold until LED lights on it; press learn button on opener; press desired opening button on the remote, out of the 2 available, the correct number of times, depending on the color of your learn button -- see chart included with clicker -- then press program button on remote again to end the process. Finit!) Works like a charm. Even will open the garage when I'm in the house. Definitely opens it once I reach my drive. I haven't tried a greater distance because I have an alarm I only disarm once I'm in the drive, and can't open the garage door until I turn off the alarm anyway. So perfect for me. I guess some people complaining about distance of transmitter want to never slow down, opening the door a block away then cruising right into their open garage. I think that's a bit of a security risk. Wait until you can at least see your garage door and verify no one is lurking outside waiting to go in before you open the door, would be my suggestion. But if you don't care about that and just want to not have to pause at all on the way in, possibly this remote won't have enough distance for you. Again, I don't know because it has worked at every distance I've tried. Just going off the complaints of others on that one.

Es necesario leer bien el instructivo anexo, si todo te queda claro y lo configuras bien, funciona a la primera sin problemas

The instruction that come with it are very easy to use even in the case of an older system that needs to be programmed manually. It's been working flawlessly for the last couple of years.

Moved into a house that was missing the remote to the garage door opener. I normally use the built in door opener buttons in my car, but I needed a working remote to program the car buttons. I was able to program this to work with the existing Craftsman 139.18452 door opener with little fuss and in turn this remote worked for programming the HomeLink buttons in my car and van.

Amazing! Yes expensive, but having two garage doors and both on two different makes (inherited from previous owners) I really didn't want my wife fumbling around two different openers, having one just made sense. In terms of the setup, well, it was almost as quick as opening the package itself. Having a chamerlain and craftsman, the setup was the same, both on Red learn buttons. All in all, came quick, packing was secure and configuration was a breeze! If you're like me with two/multiple garage opener makes, this is definitely the way to go.

Works good, extremely easy to program with opener which had learn button, took under 5 minutes, range isn't the best of the openers I've had but is adequit, 30-50' approx range for me.