Youngtown 12888 Chime Melody Pendulum Clock Movement Mechanism 59/64" Shaft

Works well , so well I have purchased several more. Easy In stall. Good sound

To be honest, more times than not, I find buying cheaper parts results in poor quality. I ended up buying two clock movements to replace the dying chime in my 30 year old regulator quartz clock with pendulum and the Westminster Chime (on the hour). The old movement was made in Japan - Takane. I bought the exact Takane replacement along with this model as a fallback. The Takane replacement mechanically was easy to install and functioned like the original regarding timekeeping but the Takane Movement has been reduced to a cheaper sounding chime that chimes 4 times in an hour and strikes for each hour at the top of the hour. I kind of like that feature but the Takane chime sounded like a toy compared to the old chime. I was going to deal with it but decided to give this clock movement a chance. It required more work to fit it as it is basically 3 parts (chime box, speaker, and clock movement). The shaft was a little smaller but with the washer and nut, it covered the shaft hole. The clock arm options were good and the actual metal was covered with protective plastic to keep it from transit marks. The shaft part where the arms connect are plastic so not sure about longevity yet. It keeps perfect time. I hot glued the speaker to the back of the clock in three tacked places so I could easily remove if I wasn’t happy with thing. (See photo) I also soldered the clock movement to the chime box to ensure I have no connection issues down the road but the pictures show it is twisted to connect. The chime box has options for different chimes or no chimes and it has a feature that shuts the chimes off at night while you sleep. If you read the instructions, it’s not that difficult to sync the chimes if you are mechanically inclined. If you are not, ask a friend or pay an installer. The best part is the sound which can be adjusted (see my video). It sounds nearly like there are real chimes behind the clock face. I’m not exaggerating, it sounds way better than I expected. I was not paid to put in this review; I just hope I help someone trying to bring an old friend back to life albeit with better sound :-)

The fit of the nut onto the the mounting shaft was so loose that the threads wouldn't engage. I had to crush the nut slightly to get it to tighten sufficiently. Instructions were sketchy at best leading one to wonder what things meant. I would have liked an option for a longer, slower pendulum. Westminster chimes are very slow, good for Big Ben maybe, but too slow for a home clock.

I wanted to revive a wall clock that simply stopped working. I really liked the idea of having one that chimed, so I did some looking around and found this. I read a few reviews on this make, and a few other makes. The prices differed as well. The reviews were mixed on all of them. I chose this one because of the price. I also really liked the idea of having to connect the wires myself as I wasn't sure where I was going to put the box that chimes and thought I would have to put it through the back of the clock, so being able to thread the wires through a small hole was a nice option. I did have to trim down the new hands, very easy to do. And I used my old pendulum because it's longer than the one that came with the kit. The hands also come with a protective clear sheet over the black side, so carefully peel that off before installing. My Youngtown clock parts came with a small card with instructions for putting the new clock together, but not how to set the chime. That was easy enough to figure out. Listen to the 1st time the mechanism chimes, and press once for the # of following hours until you hit the correct time. I set it for the current hour even though it was 1/2 past, then came back at the top of the next hour and pressed the button once to make sure the time and the chime were in sync.. The mech. will not chime when you press the button to pass through the hours of which the hours the mech is programmed NOT to go off. Between 9pm and 6am. So you have to keep count of how many times you press the button. It will start chiming again when you hit 6am.. It really is a very simple process. Easier than I can explain. Just be patient. You'll figure it out. I did wind up attaching the part that chimed to the inside of my clock with double sided tape. It appears to keep good time, and isn't that loud. I used rechargeable batteries in mine. It takes 3 AA's. The only con is that some people may not like the digital sounding - in a tin can- type sound that is the chime. But after hearing it a few times, I appreciate and understand that it is what it is. And that's actually ok with us. It's really not that bad. And for the price, I can't complain!!

This is another piece of Chinese junk. I was looking for a HD pendulum clock movement. After I installed it in my clock housing, I set up the melody and the time. However the clock hands stopped moving after about an hour. I bumped the housing and it started moving again, only to fail again a short time later! I had to give it a "star rating", however there is no 0!

While the clock parts do work and have a lovely sound, it doesn't work for fixing my 24" wall mount westminster chime clock. It will give multiple chime options and will either chime on the hour or every quarter hour (which can be a bit much). The regulator pendulum that came with the kit was too small and the one that is original to my clock is apparently too heavy as the motorized components aren't strong enough to swing it. After 24 hours, we realized it didn't keep time. I don't think this was a component problem as much as it was my purchase of too small of a kit for my clock. I messed it up, so I won't be returning it. This review isn't intended to be negative to the seller, just to help buyers know that the size matters and it won't work for this large a clock.

I was amazed how simple and cheap it really is but it’s working perfect I just wish it was a little bit stronger to actually move my original pendulum but other than that it fit perfect it seems like it’s working pretty good

This is a good movement for the money. I studied all of the inexpensive movements to replace one in a yard sale find so I didn't want to invest heavily. The chime, as another reviewer says is quite lovely for a small clock. It does NOT sound tinny or cheap. Pendulum swings and there is a stop second hand. Easy to install. I'm quite pleased with the purchase, I still have to sync the strikes but that is next on my list. Would buy this again.

Worthwhile replacement part but sadly instruction for the chime setting was not clear.Till now still dont understand how to set it

clock is good, chime not so good.

The clock works great, nice sound

I used this to replace an aging clock action. Was easy to install ymmv. Keeps good time, is a bit too loud past 1 on the chime. Measure your clocks action to make sure it fits.

J'ai acheté cet article pour réparer mon horloge. Il fonctionne très bien, le son fait un peu bon marché mais on s'habitue. Le point négatif est le manque d'instruction pour synchroniser le carillon avec l'horloge. Voici comment faire. 1) Reliez les 2 modules ensemble et les fixer à votre horloge. 2) Installez l'aiguille des heures seulement. 3) Tournez le bouton des heures situé à l'arrière jusqu'à vous entendiez un déclic, à ce moment Installez l'aiguille des minutes sur le chiffre 12 et celle des secondes. Ainsi votre horloge sonnera aux heures. Mettre l'horloge à l'heure et peser sur le bouton du carillon autant de fois que nécessaire. Exemple: s'il est 3h20 PM, peser sur le bouton jusqu'à ce que le carillon sonne 3 fois par le suite il sonnera aux heures. Le carillon est muet la nuit entre 9 h du soir et 6 h du matin. Bonne chance.