Upgraded Ender 3 v2 Ender 3 All Metal Extruder Aluminum MK8 Bowden Extruder

Like a lot of others, my Voxelab Aquila's stock plastic extruder arm cracked not long after I got my printer. I printed a replacement arm, and that actually got me by for about 4 months, but that arm started to wear out and was causing unreliable extrusion too. I didn't really feel like I needed to upgrade to a dual gear, or even a direct drive set up for my PLA and PETG printing, so I started looking into the aluminum stock replacements. I've heard these can have issues of their own; the spring can be too stiff, bad hardware, no instructions, and the pivot spacer can be too short which keeps the arm from moving. I'm happy to report, this kit has none of those problems. The stock spring is working fine, parts are all well made and fit great, no problems with the hardware and fittings. Instructions consist of an exploded view drawing with the parts labeled, which was enough for me. If you really run into trouble, there are a bunch of videos out there, or just look at your stock extruder, it goes together the same way. I'd suggest assembling the roller to the arm first, then putting everything else together with the spring being last. So all in all, this is a great kit. I'm surprised a kit of machined and anodized parts like this can be sold for such a low price to be honest. I feel like maybe aside from the brass extruder gear, the rest of these parts should last the life of the printer. If you are shopping for one of these, and seeing about 30 different versions that look the same, just get this one and be done with it.

Works very well for my ender 3 v2, extrudes nicely now

My Creality CR6-SE got a clog and after changing the nozzle, it was performing very badly with under extrusion (thin filament and spongy, weak, and fragile. prints). I suspected the cheap plastic extruder was worn out, so I bought this relatively inexpensive metal extruder (silver, single drive). It was easy and low risk to install. After installing and putting on a new 0.4mm nozzle, my printer was back to printing very well. Very happy with the purchase, ease of install, and results. I'd highly recommend this upgrade if you have an older or plastic extruder. I can confirm this works perfectly with the CR6-SE.

Is easy to put on, works as intended. My only problem is that, like most, the hole is basically the size of the filament with no guide to help it get into the tube.

This extruder is much better than stock. I accidentally bought it though. I was just adding another extruder to my Ender 3, and I needed parts. I grabbed this, not looking too closely at it. I was going to put this one on the first extruder, and a spare on the second. This extruder sticks out about 10" farther than stock. So if you're using direct drive, you'll need to offset your hotend. So I couldn't use it for that. After that first one, they're all bowden tubes, so the offset doesn't matter at all. If you're on a stock Ender3, or any machine that doesn't have something that needs to be aligned, you're fine. If you're using something that does need to be aligned, like a direct drive, you'll need spacers to push your hotend out about 5mm to 10mm. It is totally worth the upgrade. It will grip your filament better, and help to ensure a little tension doesn't interrupt the flow.

The plastic arm broke, this new arm handled a lot of pressure. I did a direct drive upgrade at the same time so for me the setup took all day.

So much better than the plastic that comes from factory, I got one of those “fancy” dual gear ones and it broke after a month, I have had this for well over a year and i have had no issues with it. The build quality is great and it fits perfect. Great upgrade!

I was looking for some knob handles for my poi, and unsure of the size, shape and weight, and realized it would $15 to buy most pairs I was looking at. They were all 3d printed TPU and I normally just do things myself but Ive got a fairly stock Ender 3 (other than the bullseye cooler) and been told it couldn't do TPU because of the Bowden. Well instead of spending $30 on a couple pairs of handles I decided I'd spend the same on this and a roll of TPU and figure it out anyway. Status quo be damned! I got the TPU first and tried to print it, but got nowhere. There was a gap between the extruder gear and the intake of the Bowden tube and the filament would just push out there and never actually be forced into the hot end. I couldn't even print a purge line. I got this today and installed it. Its pretty simple and similar the original so taking that one out should tell you how to put this in. I just printed my first TPU item and it came out flawless (although at 20mm/s but I decided to start conservative) Now that that works I plan on printing so many other things like endcaps for staffs, and grommets/seals and the like. I'd like to build a beetleweight combat robot and a lot of the armour is TPU. I feel like this opened up a whole new avenue for printing nonrigid items, and has expanded the life of my Ender for much longer as that was a reason i had though about updating. 6 years strong and its been a beast!

Prodotto pieno di cose per aggiornare la stampante però nessuno di questi è veramente utile.. Qualità non molto alta arrivato già usato! Pessimo acquisto fatto il reso. Non lo consiglio!

純正のはプラなので経年劣化で割れます これはアルミなので早めに変えとけば良かった

Gekauft für mein CR-10 V2. Passt auch aber ich habe viele Dinge nicht beachtet/erwartet. Zum Beispiel passt der Filament-Sensor nun nicht mehr, man müsste ihn erhöht anbringen, da der Filament-Zulauf nun deutlich höher ist als mit dem original Extruder (siehe Fotos). Auf den Filament-Sensor kann ich zum Glück erst mal verzichten. Montage war trotz fehlender Anleitung einfach. Der Aufbau und die Schrauben sind exakt wie beim original Extruder. Nachdem ersten Druck habe ich bemerkt, dass ich vergessen habe den E-Stepper anzupassen. Also damit der neue Extruder auch exakt so viel Filament nach schiebt wie benötigt wird. Auch hier wäre eine Anleitung die erwähnt wie das geht nützlich gewesen, aber zum Glück findet man gute Tutorials online. Ich habe den E-Stepper also von 93 mm auf ca.139 mm erhöht wodurch ich ungefähr den gleichen Durchfluss wie vorher erhalte. Die richtige Einstellung zu finden ist allerdings schwierig. Hatte erst under extrusion und dann over extrusion. Ergebnis des Upgrades: Ich habe jetzt bei deutlichen niedrigeren Temperaturen am Hot-End immer noch einen konstanten flow des Filaments. Ich erhoffe mir auch weniger Verstopfungen in Zukunft. Spürbare Verbesserung im Druck-Ergebnis ist allerdings nicht zu sehen. Fazit: Man muss ein bisschen fine tuning betreiben um die richtigen Einstellungen am Drucker zu finden. Außerdem muss man wissen wie es geht, da es keine Anleitung gibt. Insgesamt finde ich das Gesamtpaket aber gut. Sind alles Originalteile von Creality und passen. Es wäre schön gewesen vorher zu wissen, dass man dadurch den Filament-Sensor unbrauchbar macht.

Muito bom

Super qualité , aucun souci pour l'installer sur mon ender 3 le tube capricorn suffisamment grand pour deux utilisation et l'extracteur dual beau et robuste, juste les ressorts de plateau trop grand mais un coup de pince coupante et c'est réglé